MB Quart MBQR-POD-2 Handleiding

MB Quart Speaker MBQR-POD-2

Lees hieronder de 📖 handleiding in het Nederlandse voor MB Quart MBQR-POD-2 (23 pagina's) in de categorie Speaker. Deze handleiding was nuttig voor 66 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/23
8-Inch 2-Way
Compression Horn Speakers
in Kick Panel Enclosures
for Polaris® RZR® Vehicles
Installation Manual
MBQR-POD-2
2©2020 Maxxsonics USA, Inc.
Thanks for choosing MB QUART! The RZR-Tuned MBQR-POD-2 kick panel-mounted 8” 2-way compression
horn speakers have been meticulously engineered for your vehicle. The process of installation is simple and
straightforward. Installation following these detailed instructions can be completed in about 1.5 hours.
INSTALLATION OVERVIEW VIDEO
Many of the MB Quart vehicle-specic
products feature a “how to” install video with
additional details on a successful installation
Locate your specic video on the website.
Type your model number (MBQR-POD-2) into
the search box, then click on the INSTALL &
SUPPORT tab.
WHAT’S INCLUDED
The RZR® MBQR-POD-2 kick panels with 8-inch speakers ship in one box and these work equally well with
either non-Ride Command® vehicles or those equipped with the Ride Command ® system.
● Two Kick Panel-Mounted 8-inch Compression Horn Speakers in Vehicle-Specic Enclosures
● Drilling Template for Mounting Holes
● Mounting Hardware
NOTE – Hardware for mounting components and other installation-related items you will need are contained in the
kit. Upgrade your RZR audio system by adding the optional companion subwoofer, MBQR-SUB-2, and optional rear
speakers, NHT1-120BPR.
Do not dispose of any packaging until you have completely installed your system and certain you have accounted for
every piece. If something is missing, please contact Maxxsonics directly via email – support@maxxsonics.com.
WARRANTY
Your audio system is covered by a 1-year warranty from the date of the invoice. It is important to retain your
sales receipt. Furthermore, it is crucial that you record and store a record of the serial numbers for each of
the components that are included in your system. In the rare instance that a warranty claim is needed both
proofs of purchase and serial numbers are required. Additional information on the back page.
TECHNICAL SUPPORT
For additional technical information, go to the “SUPPORT” tab at MBQUART.com. There you will nd helpful,
FAQ, TEQ Tips and you can contact Technical Support via email.
INTRODUCTION
3
PRE-INSTALLATION
INSTALLATION TIME
About 1.5 hours are required to complete this installation, not including other system components.
TOOLS AND SUPPLIES NEEDED
● Wire Strippers and Crimpers ● Blue Painter’s Tape and Marker Pen
● Flush Cut Wire Cutters (for trimming zip-ties) ● Small (Jeweler’s) Screwdriver
● Hand-Held Drill and 5/16” Drill Bit ● Bojo Tools (Pry Tools)
● Ratchet ● Socket (preferably deep)
● 10mm Socket ● 1/2” Open Box Wrench
● T25 Torx Driver ● T40 Torx Driver
Depending on which vehicle-specic RZR-Tuned audio system you are installing and what other
components (not included in this kit) that are also being installed, you may or may not need all of the tools
listed below. You may also own more specialized tools to complete the installation. Please share the
pictures of your installation on MB Quart social media channels to help others.
In addition to the tools listed, have music ready for the INITIAL TESTING step. MB Quart recommends:
● USB thumb drive with music pre-loaded
● Bluetooth device such as a smartphone with music or a music app
SAFETY PRECAUTIONS
Safely prepare your machine for the installation before proceeding.
● Turn the ignition off and remove the key
● Use a packing blanket other soft material to protect your machine
● Safety Glasses - always wear eye protection
PREPARATION FOR INSTALLATION
Before dismantling your vehicle, we suggest you prepare all your components, enclosures, hardware and
wiring It increases efciency to have everything ready when each component is installed.
STEP 1 – REMOVE SEATS
Remove driver and passenger seats by pulling on the
lock clip shown in Figure 1-1 This lock clip is located
between the bottom and upright portion of the seat.
Removing both seats will give you the room to work in
the kick panel areas, in addition to getting access to the
battery for Step 2.
STEP 2 – REMOVE NEGATIVE BATTERY CABLE
Using a 10mm socket and ratchet, remove the negative
battery terminal and set aside as shown in Figure 1-2.
This safety measure ensures you do not have any
accessories powered during the installation, as well as
keeps the battery from unnecessarily draining.
Figure 1-1
Figure 1-2

Product specificaties

Merk: MB Quart
Categorie: Speaker
Model: MBQR-POD-2

Heb je hulp nodig?

Als je hulp nodig hebt met MB Quart MBQR-POD-2 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden


Handleiding Speaker MB Quart

MB Quart

MB Quart MBQJL-SUBR-1 Handleiding

14 November 2023
MB Quart

MB Quart MBQJ-48H Handleiding

18 Juli 2023
MB Quart

MB Quart MBQJ-48HRGB Handleiding

17 Juli 2023
MB Quart

MB Quart MBQJ-48E Handleiding

17 Juli 2023
MB Quart

MB Quart NHT2-120 Handleiding

25 Juni 2023
MB Quart

MB Quart RK1-113 Handleiding

8 Juni 2023
MB Quart

MB Quart QX165 Handleiding

21 Mei 2023
MB Quart

MB Quart QSE-216 Handleiding

8 Mei 2023
MB Quart

MB Quart QS165W Handleiding

6 Mei 2023
MB Quart

MB Quart QM165 VW Handleiding

3 Mei 2023

Handleiding Speaker

Nieuwste handleidingen voor Speaker

OTTO

OTTO Bluetooth Revo NC2 Handleiding

20 April 2024
REL Acoustics

REL Acoustics Strata Handleiding

20 April 2024
REL Acoustics

REL Acoustics Strata III Handleiding

20 April 2024
Soen

Soen Transit Handleiding

18 April 2024
Miller & Kreisel

Miller & Kreisel MP300RC Handleiding

18 April 2024
Soen

Soen Transit XS Handleiding

18 April 2024
Miller & Kreisel

Miller & Kreisel MP7 Handleiding

18 April 2024
Qian

Qian QRBT1801 Handleiding

17 April 2024
Focal

Focal Twin6 Handleiding

17 April 2024
Kenwood

Kenwood KFC-WPS1000F Handleiding

16 April 2024