Maytag W10495947 Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Maytag W10495947 (8 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 24 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/8
LEVELING FEET INSTALLATION INSTRUCTIONS
27" (68.6 CM) AND 30" (76.2 CM) ELECTRIC BUILT-IN
MICROWAVE/OVEN COMBINATION
INSTRUCTIONS D'INSTALLATION DES PIEDS DE
NIVELLEMENT FOUR CONVENTIONNEL ET FOUR À
MICRO-ONDES ÉLECTRIQUES, COMBINÉS ET ENCASTRÉS
DE 27" (68,6 CM) ET 30" (76,2 CM)
Table of Contents/Table des matières
BUILT-IN MICROWAVE/OVEN COMBINATION SAFETY...........2
INSTALLATION REQUIREMENTS................................................2
Tools and Parts ............................................................................2
Built-In Microwave/Oven Combination
Location Requirements................................................................3
LEVELING FEET INSTALLATION INSTRUCTIONS.....................4
Prepare Built-In Microwave/Oven Combination..........................4
Remove Oven Door......................................................................4
Positioning Oven Feet for Multiple Cabinet
Cutout Heights .............................................................................4
CURI DU FOUR À MICRO-ONDES ET DU FOUR
CONVENTIONNEL COMBINÉS ET ENCASTS........................7
Outils et pces.............................................................................7
Exigences d'emplacement de l'ensemble four à
micro-ondes et four conventionnel encastrés .............................7
INSTRUCTIONS D'INSTALLATION DES PIEDS DE
NIVELLEMENT................................................................................9
Pparation de l'ensemble des fours encastrés
(micro-ondes/conventionnel) .......................................................9
pose de la porte du four ..........................................................9
Positionnement des pieds du four pour des ouvertures
d'encastrement dans le placard de hauteur difrente................9
IMPORTANT:
Save for local electrical inspector's use.
IMPORTANT :
À conserver pour consultation par l'inspecteur local des installations électriques.
W10518287A
2
BUILT-IN MICROWAVE/OVEN COMBINATION SAFETY
INSTALLATION REQUIREMENTS
Tools and Parts
Gather the required tools and parts before starting installation.
Read and follow the instructions provided with any tools listed
here.
Tools needed
Phillips screwdriver
Measuring tape
Level
Flat-blade screwdriver
Parts supplied
Four #8-18 x ½" screws - oven feet
Bottom vent trim
Two rear feet (Part Number W10318219)
Two front feet (Part Numbers W10471952 and W10471956)
You can be killed or seriously injured if you don't immediately
You can be killed or seriously injured if you don't follow
All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can
happen if the instructions are not followed.
Your safety and the safety of others are very important.
We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety
messages.
This is the safety alert symbol.
This symbol alerts you to potential hazards that can kill or hurt you and others.
All safety messages will follow the safety alert symbol and either the word “DANGER” or “WARNING.”
These words mean:
follow instructions.
instructions.
DANGER
WARNING
4
LEVELING FEET INSTALLATION INSTRUCTIONS
Prepare Built-In Microwave/Oven
Combination
1. Decide on the final location for the oven. Locate existing
wiring to avoid drilling into or severing wiring during
installation.
2. To avoid floor damage, set the oven onto cardboard prior to
installation. Do not use handle or any portion of the front
frame for lifting.
3. Remove the shipping materials and tape from the oven.
4. Remove the hardware package from inside the bag
containing literature.
5. Remove and set aside racks and other parts from inside the
oven.
6. Move oven and cardboard close to the oven’s final location.
Remove Oven Door
IMPORTANT: Use both hands to remove oven door(s).
1. Open the oven door.
2. Locate the oven door latches in both corners of the oven
door, and rotate the latches forward to the unlocked position.
3. Grasp the edges of the oven door with both hands and close
the oven door until it will no longer close. Lift and pull oven
door toward you and remove. Set the oven door aside on a
covered work surface.
Positioning Oven Feet for Multiple Cabinet
Cutout Heights
Combo Ovens
The positioning of the oven feet allow a combo oven to be
installed in a cutout height between 41¹⁄₈" (104.5 cm) and 43⁵⁄₁₆"
(110.0 cm). Refer to the following instructions to position the feet
for the size of your cabinet cutout.
Cutout height is between 41¹" (104.5 cm) and 41½"
(105.5 cm)
The oven feet do not need to be changed. The combo is
configured correctly as received.
NOTE: Do not remove the spacers.
Go to the “Make Electrical Connection” section of the Installation
Instructions that came with the product.
A. Oven door latch in locked
position B. Oven door latch in unlocked
position
WARNING
Excessive Weight Hazard
Use two or more people to move and install oven.
Failure to do so can result in back or other injury.
A
B
A. Spacers
A
A


Product specificaties

Merk: Maytag
Categorie: Niet gecategoriseerd
Model: W10495947

Heb je hulp nodig?

Als je hulp nodig hebt met Maytag W10495947 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Niet gecategoriseerd Maytag

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd