Maytag MVW6200KW Handleiding

Bekijk gratis de handleiding van Maytag MVW6200KW (132 pagina’s), behorend tot de categorie Wasmachine. Deze gids werd als nuttig beoordeeld door 45 mensen en kreeg gemiddeld 4.6 sterren uit 5 reviews. Heb je een vraag over Maytag MVW6200KW of wil je andere gebruikers van dit product iets vragen? Stel een vraag

FOR SERVICE TECHNICIAN’S USE ONLY

1

W11416395A

IMPORTANT SAFETY NOTICE — “For Technicians only”

This service data sheet is intended for use by persons having electrical, electronic, and mechanical experience and

knowledge at a level generally considered acceptable in the appliance repair trade. Any attempt to repair a major

appliance may result in personal injury and property damage. The manufacturer or seller cannot be responsible, nor

assume any liability for injury or damage of any kind arising from the use of this data sheet.

IMPORTANT: Electrostatic Discharge (ESD) Sensitive Electronics

ESD problems are present everywhere. Most people begin to feel an ESD discharge at approximately 3000 V. It takes as

little as 10 V to destroy, damage, or weaken the main control assembly. The new main control assembly may appear to

work well after repair is finished, but a malfunction may occur at a later date due to ESD stress.

Ƀ

Use an anti-static wrist strap. Connect wrist strap to green earth connection point or unpainted metal in the

appliance.

– OR –

Touch your finger repeatedly to a green ground connection point or unpainted metal in the appliance.

Ƀ

Before removing the part from its package, touch the anti-static bag to a green ground connection point or unpainted

metal in the appliance.

Ƀ

Avoid touching electronic parts or terminal contacts; handle electronic control assembly by edges only.

Ƀ

When repackaging main control assembly in anti-static bag, observe above instructions.

Voltage Measurement Safety Information

When performing live voltage measurements, you must do the following:

Ƀ

Verify the controls are in the off position so that the appliance does not start when energized.

Ƀ

Allow enough space to perform the voltage measurements without obstructions.

Ƀ

Keep other people a safe distance away from the appliance to prevent potential injury.

Ƀ

Always use the proper testing equipment.

Ƀ

After voltage measurements, always disconnect power before servicing.

DANGER

Onlyauthorizedtechnicians should

perform diagnostic voltage measurements.

After performing voltage measurements,

disconnectpower beforeservicing.

Failure to follow these instructionscan

result in death orelectrical shock.

Product specificaties