Maxxus RunMaxx 90 Pro Handleiding

Maxxus Loopband RunMaxx 90 Pro

Lees hieronder de 📖 handleiding in het Nederlandse voor Maxxus RunMaxx 90 Pro (29 pagina's) in de categorie Loopband. Deze handleiding was nuttig voor 15 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/29
I N S TA L L AT I O N & O P E R AT I N G M A N U A L
1
ENG
RunMAXX 90 PRO
Treadmill
2
Index
Index 2
Safety instructions 3
Overall View of the Device 4
Assembly Material & Tools 4
Scope of delivery 4
Assembly 5-6
Transport 7
Mains Cable 7
Disabling function 7
Safety Key 8
What to do in an emergency 8
Care, Cleaning & Maintenance 9
Lubricating the Treadmill Belt 10
Adjusting the Treadmill Belt 11
Re-Tensioning the Treadmill Belt 11
Cockpit 12-18
Heart Rate Monitoring 19
Warning for Pulse & Heart Rate Measurement 20
Pulse Rate Monitoring using Hand Sensors 20
Heart Rate Monitoring using a Chest Belt 20
Training recommendations 21 - 22
Technical Details 23
Disposal 23
Recommended accessories 23
Exploded Drawing 24
Parts list 25 - 26
Warranty 27
Repairs Contract / Notiîš¿cation of a Damage Claim 28
© 2015 by MAXXUS Group GmbH & Co. KG
All rights reserved
This publication may not be reproduced, stored in retrieval system, or transmitted on whole or in part, in any form or by any means, electronic, mechanical, photocopy-
ing,recording, or otherwise, without the prior written permission of Maxxus Group GmbH & Co. KG.
Errors, colour and technical modiîš¿cation subject to change, reproduction as well as electronic duplication only with written permission of MAXXUS Group GmbH & Co. KG
3
ENG
Please read and observe all sections of this Operating Manual. Thorough attention should be paid to the safety, service and
maintenance instructions and to the training information at all times
It is very important to adhere strictly to the service and maintenance instructions contained in this Manual.
This training device is only to be used for its intended purpose.
If this equipment is used for any other purposes than intended, there is a possible risk of accident, damage to health or
damage to the training device. The Distributor cannot be held responsible in these circumstances.
Electrical Connection
−A mains voltage of 220-230V is required to operate this training device.
−The training device is only to be connected to the mains with the mains cable supplied using a 16A individually fused
and earthed socket installed by a qualiîš¿ed electrician.
− The training device is only to be switched on and o󰀨 using the ON/OFF switch.
−Always remove the electric plug from the socket before moving the training device.
−Remove the electric plug from the socket before commencing any cleaning, maintenance or other works.
−Do not connect the mains plug to a socket on a socket strip or on a cable drum.
−If using a cable extension please ensure that this complies with DIN standards, VDE regulations and guidelines, tech-
nical rules issued by other European Union states.
−Always place the mains cable so it cannot be damaged or cause a tripping hazard.
−In operating or standby mode, electrical devices such as mobile phones, PCs, Televisions (LCD, plasma, tube, etc.),
game consoles etc. will emit electro-magnetic radiation. For this reason, all these types of devices should be kept
away from your training device as they could lead to malfunction, disturbances or false outputs being shown in heart
rate measurements.
Training Environment
−Select a suitable space for your training device to provide an optimum amount of free space and highest level of safe-
ty. You should leave a free space of at least 200 cm long and 100 cm wide behind the training device. A minimum of
100 cm free space to each side and in front of the training device should be allowed for.
−Make sure that the area is well ventilated and that an optimum amount of oxygen is available during training. Avoid
draughts.
−Your training device is not suitable for outside use and so storage and training can only take place in a temperate,
clean dry room.
−Do not operate or store your training device in wet areas such as in swimming pools, saunas etc.
− Make sure that your training device is kept on at, hard, clean ground both in operation and at rest. Any uneven surfac-
es must be removed or made good.
− It is recommended that a oor covering (carpet, mat, etc.) should be placed under the device to protect damageable
oors such as wood, laminates, oor tiles etc. Please ensure that this underlay cannot slip or slide.
−Do not put this training device on pale or white coloured carpets or rugs as the feet of the device may leave marks.
−Make sure that your training device and mains cable are kept out of contact with hot surfaces and are kept at a safe
distance from any sources of heat e.g. central heating, hot stoves, furnaces, ovens or open îš¿res.
Personal Safety Instructions for Training
−The safety key must be inserted correctly before each training session can begin.
−Remove the safety key and mains cable from the training device when not in use to avoid inappropriate or uncontrolled
use by any other third party, e.g. children.
− Stop training immediately if you feel physically unwell or are experiencing any breathing di󰀩culties.
−Always start your training session at a low workload increasing it slowly but steadily throughout. Reduce the workload
again towards the end of your training session.
−Suitable sports shoes and clothes should always be worn during training sessions. Make sure that loose clothes do not
get caught up in the treadmill belt or rollers.
−Your training device is only to be used by one person at a time.
−Check each time before a training session to see if your device is in perfect condition. Never use your training device if
it is faulty or defective.
−You are only permitted to carry out repairs to the device yourself after having contacted our Service Department and
on receipt of explicit permission to do so. Only original spare parts may be used at any time.
−Your training device must be cleaned after each use. Remove all dirt including body sweat or any other liquids.
−Always make sure that liquids (drinks, body sweat, etc.) do not get onto the vibrating plate or into the cockpit as this
can cause damage to the mechanical and electronic components.
−Your training device is not suitable for use by children.
−Third parties, especially children and animals, must be kept at an appropriate safety distance during training.
−Check if there are any items underneath the training device before each training session and remove them without fail.
Never use the training device when items are underneath it.
−Do not allow children to use your training device as a toy or climbing frame at any time.
−Ensure that no body parts of your own or of third parties ever come into contact with any of the moving mechanisms.
The construction of this training device is based on state of the art technology and highest modern technical safety stand-
ards.
This training device is to be used by adults only!
Extreme misuse and/or unplanned training can cause damage to your health!
Safety Instructions


Product specificaties

Merk: Maxxus
Categorie: Loopband
Model: RunMaxx 90 Pro

Heb je hulp nodig?

Als je hulp nodig hebt met Maxxus RunMaxx 90 Pro stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Loopband Maxxus

Handleiding Loopband

Nieuwste handleidingen voor Loopband