Maruyama M27QC Handleiding
Maruyama
Snijmachine
M27QC
Bekijk gratis de handleiding van Maruyama M27QC (76 pagina’s), behorend tot de categorie Snijmachine. Deze gids werd als nuttig beoordeeld door 2 mensen en kreeg gemiddeld 4.3 sterren uit 1.5 reviews. Heb je een vraag over Maruyama M27QC of wil je andere gebruikers van dit product iets vragen? Stel een vraag
Pagina 1/76
The POWER in Outdoor Power
Completely read and understand this manual PRIOR to using this product.
Lea y entienda este manual a fondo, ANTES de usar este producto.
Lisez complèment et comprenez ce manuel AVANT d’utiliser ce produit.
Multi-Cutter
Power Unit/Grupo Motor/Bloc Moteur
M27QC/M30QC
OWNER'S/OPERATOR'S MANUAL
MANUAL DEL PROPIETARIO U OPERADOR
MANUEL DU PROPRIETAIRE/DE L'UTILISATEUR
— US-1 —
Limited Warranty Statement
All Maruyama commercial/ industrial products are warranted to the original purchaser to be free from defects
in material and workmanship from the date of purchase for the time periods listed as follows:
Lifetime for solid steel driveshaft and ignition coils.
5 years for qualified IRON 5-YR™ commercial, institutional, or industrial use.
1 year for residential or 2 years for commercial use with competitor’s oil.
90 days for rental use.
Engine - Refer to engine manufacturer’s warranty statement. Only Maruyama engines are
covered by this limited warranty statement.
Any part of a Maruyama product found to be defective within the applicable warranty period shall, at
Maruyama's option, be repaired or replaced without charge. Warranty consideration is obtained by delivering
any Maruyama product believed to be defective to an Authorized Maruyama Servicing Dealer within the
applicable warranty period.
The purchaser shall not be charged for diagnostic labor that leads to the determination that a warranted
part is defective, if the diagnostic work is performed at a Maruyama Dealer.
Any warranted part which is not scheduled for replacement as required maintenance, or which is scheduled
only for regular inspection to the effect of “repair or replace as necessary” shall be warranted for the warranty
period. Any warranted part, which is scheduled for replacement as, required maintenance shall be warranted
for the period of time up to the first scheduled replacement point for that part. Maruyama Mfg. Co., Inc. is
liable for damages to other engine components caused by the failure of a warranted part still under warranty.
The purchaser is responsible for the performance of the required maintenance, as defined by Maruyama Mfg.
Co., Inc. in the Owner's/Operator's Manual.
EMISSION-RELATED PARTS WARRANTY: In addition to the above warranty coverage, Maruyama Mfg.
Co., Inc. will repair or replace, free of charge, for the original purchaser and each subsequent purchaser
any emission-related part or parts found to be defective in material and workmanship for two (2) years from
original retail delivery date. Emission-related parts are the carburetor assembly, the ignition coil
assembly, the ignition rotor, the spark plug, the catalytic converter and the fuel tank. Any replace
-
ment part that is equivalent in performance and durability may be used in non-warranty maintenance or
repairs, and shall not reduce the warranty obligations of Maruyama Mfg. Co., Inc.
®
Product specificaties
| Merk: | Maruyama |
| Categorie: | Snijmachine |
| Model: | M27QC |
Heb je hulp nodig?
Als je hulp nodig hebt met Maruyama M27QC stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Snijmachine Maruyama
8 Augustus 2024
8 Augustus 2024
8 Augustus 2024
8 Augustus 2024
8 Augustus 2024
8 Augustus 2024
8 Augustus 2024
8 Augustus 2024
8 Augustus 2024
7 Augustus 2024
Handleiding Snijmachine
- Tescoma
- Berkel
- Gude
- Brandson
- Wilfa
- Silvercrest
- Exquisit
- Bron-Coucke
- Mach
- Bifinet
- Ozito
- Team
- Severin
- Domoclip
- Bosch
Nieuwste handleidingen voor Snijmachine
8 September 2025
8 September 2025
8 September 2025
8 September 2025
1 September 2025
27 Augustus 2025
26 Augustus 2025
26 Augustus 2025
26 Augustus 2025
26 Augustus 2025