Marshall V-R573P-SDI Handleiding

Bekijk gratis de handleiding van Marshall V-R573P-SDI (2 pagina’s), behorend tot de categorie Monitor. Deze gids werd als nuttig beoordeeld door 2 mensen en kreeg gemiddeld 4.8 sterren uit 5 reviews. Heb je een vraag over Marshall V-R573P-SDI of wil je andere gebruikers van dit product iets vragen? Stel een vraag

Marshall

Marshall Marshall

Marshall

V-R573P-SDI Instruction Sheet

Broadcast Multimedia Division http://www.LCDRacks.com e-mail: sales@mars-cam.com

The is a rack mounted unit that has three independently controlled 5.7” active matrix V-R573P-SDI

LCD panels with loop-through capability. This unit also has a unique feature that allows the unit to tilt

up or down for optimum viewing angle. The unit ts into a EIA standard 19” rack, three rack spaces

high. Each of the three screens has individual front mounted selector buttons with LED’s and color,

tint, brightness and contrast controls. Each screen has two inputs (1 composite video NTSC/PAL and 1

SDI) with loop-through and a built-in color bar generator.

The operation of the V-R573P-SDI is fairly straight forward. However, it is important to take

note of the following:

1. Each LCD Panel comes with a protective plastic lm that must be removed by carefully lifting

the lm from the corner and peeling it o. Be certain not to apply any pressure on the LCD

panels, they are fragile and can break. Scratched, cracked or broken LCD screens are not

covered by our warranty.

2. The V-R573P-SDI uses 12VDC, 2.0amp regulated power. Be certain that these specications

are met when using a power supply other than the one supplied to you by Marshall

Electronics.

3. The polarity configuration for the V-R573P-SDI is indicated on the rear panel of the unit. Any

battery operation of the V-R573P-SDI must have this polarity conguration.

4. The video inputs on the rear of the panel are 75 Ohm self-terminated. The loop-through

feature uses active components and is always active as long as power is supplied to the unit

regardless of the monitor being ON or OFF.

Rear View Side View

Display Active Area Dot Pitch

Picture

Elements

Inputs

Color

Bars

Dimensions

Power

Consumption

5.7" LCD

Active Matrix

115.2mm x

86.2mm Per

Panel

0.18mm x

0.18mm

640 x 480

Per Panel

1 Composite/

1 SDI Per

Panel

Built In

18.96W x

5.2H x 2.5D

12 VDC 2.0

Amps

Product specificaties