Marshall CV355-30X-NDI Handleiding


Lees hieronder de šŸ“– handleiding in het Nederlandse voor Marshall CV355-30X-NDI (15 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 4 personen en werd door 2.5 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/15
B r o a d c a s t A / V D i v i s i o n
CV355-3 -NDI0X
25X DIĀ®|HX ox N B
Camera
User Manual
[Firmware Version 0.43]
1
Table of Contents
2. Package Contents
3.1 I/O Functions Introduction
3.2 Tally Indicator Light Function Description
4. Installation Instructions
4.1 Installation Basics
4.2 Connecting Devices
5. Network Function Settings
5.1 Web System Requirements
5.2 Connecting Camera to Network
5.3 Web Page Function Description
6. Specifications
7. Troubleshooting
Warranty
1. Safety Instructions
06
06
06
07
07
07
08
11
11
11
14
26
27
28
04
3
Understanding Quick setup of CV355-30X-NDI with NDIĀ®|HX
This section explains how to quickly configure the Marshall CV355-30X-NDI camera with NDI®|HX.
It also explains how to update the device, and where you can find additional NDI software to extend your
workflow. Complete NDIĀ® Tools can be found here: https://www.ndi.tv/tools/
Here you will choose whether you will require NDIĀ® Tools for Windows or Mac and download.
After completing this short section, you will be all set to begin using your new NDIĀ®|HX camera.
OVERVIEW: Unlike typical cameras, CV355-30X-NDI leverages the easy plug-n-play benefits of the NDI-based
IP workflow supported by leading video software and hardware developers around the globe.
GETTING READY: Your new CV355-30X-NDI uses the NDIĀ®|HX protocol for audio/video transmission, and
more. Your first step will be to install NDI|HX drivers if using a TriCaster, or Microsoft HEVC decode on non-
TriCaster systems, as appropriate for your computer platform or device.
1. Navigate to ndi.tv/formats in your web browser and follow the relevant directions to download and install
the drivers for your computer platform. NOTE: The NDI|HX driver also installs NewTek’s NDI Studio
Monitor application, which will not only display the output of your camera but also provide easy access
to its settings. Also contains built-in PTZ controls.
2. NDI Studio Monitor and other useful NDI tools can be found here: https://www.ndi.tv/tools/
3. Then simply plug the Ethernet (NDI) port to same Network your computer or Newtek equipment are
plugged into and off you go.
NOTE: The End User License Agreement under which you use the NDI|HX driver specifies that ā€œyou may use
up to five (5), and no more than five, copies on separate machines at one time.ā€
OPTIONAL – for Microsoft WindowsĀ® users, downloading and installing the NewTek NDIĀ® Tools pack,
available at no cost from ndi.tv/tools/, the download pack will provide learning tools and utilities to maximize
your NDIĀ®|HX experience.
FINAL NOTE – if you are experiencing any problems with the NDIĀ® platform, NDIĀ® software, NDIĀ® drivers
please contact Newtek for technical assistance or join the NDI community to review HOW-TO videos, social
media, forums, blogs: www.ndi.tv/community
If you are having a hardware problem, and need assistance please contact Marshall Electronics.
Marshall Customer Support
Toll Free: 800-800-6608 or 310-333-0606
Email: support@marshall-usa.com


Product specificaties

Merk: Marshall
Categorie: Niet gecategoriseerd
Model: CV355-30X-NDI

Heb je hulp nodig?

Als je hulp nodig hebt met Marshall CV355-30X-NDI stel dan hieronder een vraag en andere gebruikers zullen je antwoorden