Marshall Electronics CV-PT-HEAD Handleiding

Marshall Electronics Statief CV-PT-HEAD

Lees hieronder de 📖 handleiding in het Nederlandse voor Marshall Electronics CV-PT-HEAD (5 pagina's) in de categorie Statief. Deze handleiding was nuttig voor 35 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/5

B r o a d c a s t A / V D i v i s i o n

CV-PT-HEAD

User Manual

Table of Contents

2. Joystick Control

3. Pre-Set Positions

4. Connections

5. Cable Management

6. Pan & Tilt Clutch Adjustment

7. Speciﬁcations

8. Safety

9. Camera Speciﬁc Connections

Warranty

1. Introduction

The CV-PT-HEAD contains 10 gears. Some controllers can select any gear, but others can only

select a fewer number of gears. The movement is fully proportional to the joystick displacement in

all gears.

If the ‘turbo’ button is enabled on the controller this will set the speed to the fastest gear triggered

by holding down the button.

The CV-PT-HEAD has the capacity to store up to 64 pre-set positions although some controllers

can only access 4 positions. When ﬁrst powering the unit on you will need to manually set a ‘Home’

position or storing the positions you need. You can set a ‘Home’ position by using a known picture

position from the camera or by driving it to the ends of the pan and tilt travel. Doing this will enable

it to re-call previously stored positions.

2. Joystick Control

3. Pre-set Positions

Product specificaties

Merk:	Marshall Electronics
Categorie:	Statief
Model:	CV-PT-HEAD
Kleur van het product:	Zwart
Gewicht:	- g
Hoogte:	- mm
Maximale gewichtscapaciteit:	0.4 kg
Bijlage:	1/4 "
Voorkant kantelhoek:	0 - 350 °
Tripod head type:	Pan