Marmitek DS831 Handleiding
Bekijk gratis de handleiding van Marmitek DS831 (24 pagina’s), behorend tot de categorie Toegangscontrolesysteem. Deze gids werd als nuttig beoordeeld door 76 mensen en kreeg gemiddeld 4.4 sterren uit 38.5 reviews. Heb je een vraag over Marmitek DS831 of wil je andere gebruikers van dit product iets vragen? Stel een vraag
Pagina 1/24
P
ROGUAR
D
800
20187 / 20070314 • DS831TM
© ALL RIGHTS RESERVED MARMITEK ®
USER MANUAL 2
GEBRAUCHSANLEITUNG 5
GUIDE UTILISATEUR 9
MODO DE EMPLEO 12
MANUALE D’ISTRUZIONI 15
GEBRUIKSAANWIJZING 18
PROGUARD800™SERIES
DS831 DOOR WINDOW SENSOR
DS831 2
SAFETY WARNINGS
• To prevent short circuits, this product should only be used inside and only in dry
spaces. Do not expose the components to rain or moisture. Do not use the product
close to a bath, swimming pool etc.
• Do not expose the components of your systems to extremely high temperatures
or bright light sources.
• In case of improper usage or if you have altered and repaired the product
yourself, all guarantees expire. Marmitek does not accept responsibility in the case
of improper usage of the product or when the product is used for purposes other
than specified. Marmitek does not accept responsibility for additional damage other
than covered by the legal product responsibility.
• This product is not a toy. Keep out of reach of children.
• Keep batteries out of the reach of children. Dispose of batteries as chemical
waste. Never use old and new batteries or different types of batteries together.
Remove the batteries when you are not using the system for a longer period of
time. Check the polarity (+/-) of the batteries when inserting them in the product.
Wrong positioning can cause an explosion.
• Automatic switching devices provide comfort, but can also be dangerous. They
can surprise people or can ignite clothing hanging over an electric heat source.
Please be careful and take appropriate measures to avoid accidents.
MAGNETIC CONTACT (DS831)
The DS831 is a magnetic contact designed for installation on doors and windows.
This product is a part of the Marmitek ProGuard800 series, and operates together
with the ProGuard800 alarm system. When you wish to know more about the
complete system, its possibilities and its settings, then you can check out the
installation manual or visit
www.marmitek.com.
INSTALLATION PROCEDURE
To install magnetic contacts.
1. To open the housing, insert a
small screwdriver at the bottom
of the unit between the front and
back cover and twist the
screwdriver to release the cover.
Battery
Holder
Antenna
LED
Indicator
Location
of wiring
knockou
Tamper
Switch
PCB
Release
Tab
Loop
Terminal
1cm max.
Figure B.3: EL-2601 (cover off)
Operation
Mode Jumper
Product specificaties
| Merk: | Marmitek |
| Categorie: | Toegangscontrolesysteem |
| Model: | DS831 |
Heb je hulp nodig?
Als je hulp nodig hebt met Marmitek DS831 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Toegangscontrolesysteem Marmitek
16 Juni 2023
4 Juni 2023
19 April 2023
24 Februari 2023
18 Januari 2023
11 Januari 2023
2 November 2022
22 Oktober 2022
Handleiding Toegangscontrolesysteem
- Bosch
- Axis
- SOREX
- Pyramid Time Systems
- Approx
- Viking
- HID Identity
- ETiger
- Eura
- Burg-Wachter
- Iget
- Abus
- Suprema
- Apc
- Steren
Nieuwste handleidingen voor Toegangscontrolesysteem
4 Juli 2025
16 Juni 2025
16 Juni 2025
10 Juni 2025
10 Juni 2025
9 Juni 2025
9 Juni 2025
9 Juni 2025
9 Juni 2025
9 Juni 2025