Manitowoc K00470 Handleiding

Bekijk gratis de handleiding van Manitowoc K00470 (1 pagina’s), behorend tot de categorie Ijsmachine. Deze gids werd als nuttig beoordeeld door 39 mensen en kreeg gemiddeld 4.0 sterren uit 3 reviews. Heb je een vraag over Manitowoc K00470 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

Instruction Sheet

Subject: K00470 K00472 K00473 Bin Adapter

BIN ADAPTER

K00470  30” ICE MACHINE ON 48” BIN

K00472  22” ICE MACHINE ON A 30” BIN

K00473  22” ICE MACHINE ON A 48” BIN

1 of 1

Document Number: 000015255 Rev 01 1/18

MANITOWOC ICE

2110 SOUTH 26TH STREET, MANITOWOC, WI 54220

844724CARE

WWW.MANITOWOCICE.COM

n

Warning

Authorized Service Representatives are obligated to follow

industry standard safety procedures, including, but not

limited to, local/national regulations for disconnection

/ lock out / tag out procedures for all utilities including

electric, gas, water and steam.

These instructions are used for installing the following:

• 22” ice machines on 30” B, K or D model bins

• 22” ice machines on 48” B, K or D model bins

• 30” ice machines on 48” B, K or D model bins

1. Remove protective coating from support rail and bin

adapter prior to assembly.

2. Refer to drawing and place support in position. Angled

flange of support must face the front of the bin. Apply

foam tape on top of the support.

3. Place bin adapter on bin - No fasteners are required.

4. Apply foam tape from the kit around bin top opening.

A. Foam tape applied to the front of the bin opening

must be located under the ice machine bottom rail.

B. Apply foam tape around the sides and rear of the

bin top opening.

5. Place bin in final position and adjust legs to level bin in

all directions.

6. Refer to Ice Machine Installation Manual for ice machine

installation. Clean and sanitize the ice machine and bin

when installation is complete.

Angled ends must face toward

front of bin/ice machine

Foam tape must be located

underneath the front ice

machine bottom rail.

Install Foam Tape around

bin top opening

Product specificaties