Manhattan 180924 Handleiding


Bekijk gratis de handleiding van Manhattan 180924 (28 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 8 mensen en kreeg gemiddeld 3.5 sterren uit 4.5 reviews. Heb je een vraag over Manhattan 180924 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

Pagina 1/28
For additional benefits
EU 10-Port AC
Charging Cabinet
Instructions
Model 180924
or visit: register.manhattanproducts.com/r/180924
Important: Read before use. • Importante: Leer antes de usar.
Scan to
register your
product warranty
For specifications, please visit manhattanproducts.com register.. Register your product at
manhattanproducts.com/r/180924 or scan the QR code on the cover.
Using the Lock
The Default Combination and Turning the Wheels
The default combination is 0-0-0-0; see below. The wheels are only able to be turned to the left.
To Unlock
Combination Method: Turn the wheels to the correct
code.
Key Method: Turn the key in the lock as shown.
Once the cabinet is unlocked, pull up from the bottom of the handle and turn it 90° to the right; then open the door.
To Lock
Close the door, turn the handle 90° to the left and push it back into its closed state. Once the cabinet is secure:
Combination Method: Scramble
the combination wheels.
Key Method: Turn the key back 90°
and remove it from the lock.
2
Instructions
English
To Set a New Combination
Remember to record and safely store the new combination after you set it. This is a
mechanical lock, which cannot be reset directly if the code is forgotten.
1 Make sure the Combination button on the back of the handle is in the Normal position.
2 Push the Combination button to the Set position.
3 Turn the combination wheels to your desired code. NOTE: make sure
to record and securely store the new combination.
4 Once the new code is set, push the Combination button back to the Normal position.
NOTE: Make sure you record and securely store the new combination.
To Find the Forgotten Combination
1 Remove the combination wheel box from the handle by unfastening the screws that secure it in place.
2 Turn the combination wheels to the left to find the cutouts on the adjacent smaller wheels. The number next to the
cutout is the correct number in the combination.
3 Once the correct combination is noted and stored securely, re-fasten the
combination wheel box to the handle using the screws.
1 2 3 4
3
Instructions
English


Product specificaties

Merk: Manhattan
Categorie: Niet gecategoriseerd
Model: 180924
Kleur van het product: Zwart
Gewicht: 2300 g
Breedte: 460 mm
Diepte: 477 mm
Hoogte: 485 mm
Gewicht verpakking: 25000 g
Soort: Kast voor draagbaar apparaatbeheer
Gebruikershandleiding: Ja
Materiaal behuizing: Glass, Polycarbonate (PC), Steel
Stroom: 16 A
Plaatsing: Muur
Met slot: Ja
Certificering: CE\nRoHS\nREACH\nIEC 60320\nIEC 60884
Temperatuur bij opslag: -15 - 45 °C
Oplaadbron: AC
Stroomspanning bescherming: Over current, Short circuit
Stapelbaar: Ja
Montagebeugels meegeleverd: Ja
AC-ingangsspanning: 100 - 250 V
AC-ingangsfrequentie: 50 - 60 Hz
Bedrijfstemperatuur (T-T): 0 - 45 °C
Relatieve vochtigheid in bedrijf (V-V): 20 - 80 procent
Maximale schermgrootte: 15.6 "
Over voltage bescherming: Ja
Number of devices supported: 10
Ondersteunde draagbare apparaten: Notebook
Slot type: Sleutel
Aantal sleutels meegeleverd: 2 stuk(s)
Sleufbreedte: 400 mm
Sleufdiepte: 29 mm
Sleufhoogte: 282 mm
Lengte stroomkabel: 2 m
Sleutels inbegrepen: Ja

Heb je hulp nodig?

Als je hulp nodig hebt met Manhattan 180924 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden