Makita UH004GD202 Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Makita UH004GD202 (20 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 118 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/20
INSTRUCTION MANUAL
Cordless Hedge Trimmer
UH004G
UH005G
UH006G
UH007G
UH008G
UH009G
ENGLISH: Original instructions
Read before use.
2 ENGLISH
SPECIFICATIONS
Model: UH004G UH005G UH006G
Blade length 600 mm 750 mm 600 mm
Strokes per minute 2,000 / 3,600 / 5,000 min
-1 2,000 / 3,000 /
4,000 min-1
Overall length 1,120 mm 1,263 mm 1,123 mm
Rated voltage D.C. 36 V - 40 V max
Net weight 4.3 - 4.9 kg 4.5 - 5.1 kg 4.4 - 5.0 kg
Protection degree IPX4
Model: UH007G UH008G UH009G
Blade length 750 mm 600 mm 750 mm
Strokes per minute 2,000 / 3,000 /
4,000 min-1 2,000 / 3,600 / 5,000 min
-1
Overall length 1,274 mm 1,120 mm 1,262 mm
Rated voltage D.C. 36 V - 40 V max
Net weight 4.6 - 5.2 kg 4.3 - 4.9 kg 4.4 - 5.0 kg
Protection degree IPX4
• Duetoourcontinuingprogramofresearchanddevelopment,thespecicationshereinaresubjecttochange
without notice.
• Specicationsmaydierfromcountrytocountry.
• Theweightmaydierdependingontheattachment(s),includingthebatterycartridge.Thelightestandheavi-
est combination, according to EPTA-Procedure 01/2014, are shown in the table.
Applicable battery cartridge and charger
Batterycartridge BL4020* / BL4025* / BL4040* / BL4050F
*:Recommendedbattery
Charger DC40RA / DC40RB / DC40RC
• Someofthebatterycartridgesandchargerslistedabovemaynotbeavailabledependingonyourregionof
residence.
WARNING: Only use the battery cartridges and chargers listed above.Useofanyotherbatterycartridges
andchargersmaycauseinjuryand/orre.
Recommended portable power pack
Portable power pack PDC1200 / PDC01
• Theportablepowerpack(s)listedabovemaynotbeavailabledependingonyourregionofresidence.
• Beforeusingtheportablepowerpack,readinstructionandcautionarymarkingsontheportablepowerpack.
Symbols
Thefollowingsshowthesymbolswhichmaybeused
fortheequipment.Besurethatyouunderstandtheir
meaning before use.
Read instruction manual.
Weareyeprotection.
DANGER-Keephandsawayfromblade.
Ni-MH
Li-ion
OnlyforEUcountries
Due to the presence of hazardous com-
ponents in the equipment, waste electrical
and electronic equipment, accumulators
andbatteriesmayhaveanegativeimpact
on the environment and human health.
Do not dispose of electrical and electronic
appliances or batteries with household waste!
In accordance with the European Directive
on waste electrical and electronic equipment
and on accumulators and batteries and
waste accumulators and batteries, as well as
their adaptation to national law, waste elec-
trical equipment, batteries and accumulators
shouldbestoredseparatelyanddelivered
to a separate collection point for municipal
waste, operating in accordance with the
regulations on environmental protection.
Thisisindicatedbythesymbolofthe
crossed-out wheeled bin placed on the
equipment.
3 ENGLISH
Intended use
The tool is intended for trimming hedges.
Noise
Applicable standard : EN62841-4-2
Model Sound pressure level Sound power level
LpA(dB(A)) UncertaintyK
(dB(A))
LWA(dB(A)) UncertaintyK
(dB(A))
UH004G 85 963 3
UH005G 86 973 3
UH006G 81 923 3
UH007G 81 923 3
UH008G 82 933 3
UH009G 83 943 3
NOTE:Thedeclarednoiseemissionvalue(s)hasbeenmeasuredinaccordancewithastandardtestmethodand
maybeusedforcomparingonetoolwithanother.
NOTE:Thedeclarednoiseemissionvalue(s)mayalsobeusedinapreliminaryassessmentofexposure.
WARNING: Wear ear protection.
WARNING: The noise emission during actual use of the power tool can dier from the declared val-
ue(s) depending on the ways in which the tool is used especially what kind of workpiece is processed.
WARNING: Be sure to identify safety measures to protect the operator that are based on an estimation
of exposure in the actual conditions of use (taking account of all parts of the operating cycle such as the
times when the tool is switched o and when it is running idle in addition to the trigger time).
Vibration
Thevibrationtotalvalue(tri-axialvectorsum)determinedaccordingtoEN62841-4-2:
Model Front handle Rear handle
ah (m/s2) Uncertainty K
(m/s2)
ah (m/s2) Uncertainty K
(m/s2)
UH004G 2.9 1.5 1.52.5 or less
UH005G 3.1 1.5 2.7 1.5
UH006G 3.0 1.5 1.52.5 or less
UH007G 3.4 1.5 3.1 1.5
UH008G 3.1 1.5 1.52.5 or less
UH009G 3.2 1.5 2.5 1.5
NOTE:Thedeclaredvibrationtotalvalue(s)hasbeenmeasuredinaccordancewithastandardtestmethodand
maybeusedforcomparingonetoolwithanother.
NOTE:Thedeclaredvibrationtotalvalue(s)mayalsobeusedinapreliminaryassessmentofexposure.
WARNING: The vibration emission during actual use of the power tool can dier from the declared
value(s) depending on the ways in which the tool is used especially what kind of workpiece is processed.
WARNING: Be sure to identify safety measures to protect the operator that are based on an estimation
of exposure in the actual conditions of use (taking account of all parts of the operating cycle such as the
times when the tool is switched o and when it is running idle in addition to the trigger time).
EC Declaration of Conformity
For European countries only
TheECdeclarationofconformityisincludedasAnnexA
to this instruction manual.


Product specificaties

Merk: Makita
Categorie: Niet gecategoriseerd
Model: UH004GD202

Heb je hulp nodig?

Als je hulp nodig hebt met Makita UH004GD202 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Niet gecategoriseerd Makita

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd