Makita M8100 Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Makita M8100 (44 pagina's) in de categorie Klopboormachines. Deze handleiding was nuttig voor 44 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/44
M8100
M8101
EN Hammer Drill INSTRUCTION MANUAL 3
FR Perceuse à percussion MANUEL D’INSTRUCTIONS 7
DE Schlagbohrmaschine BETRIEBSANLEITUNG 11
IT Trapano a percussione ISTRUZIONI PER L’USO 15
NL Hamerboor GEBRUIKSAANWIJZING 19
ES Rotomartillo MANUAL DE
INSTRUCCIONES 23
PT Furadeira de impacto MANUAL DE INSTRUÇÕES 27
DA Hammerbor BRUGSANVISNING 31
EL Κρουστικό τρυπάνι ΕΓΧΕΙΡΙΔΙΟ ΟΔΗΓΙΩΝ 35
TR Darbeli matkap KULLANMA KILAVUZU 39
1
2
Fig.1
1
A
B
Fig.2
1
Fig.3
1
2
3
4
56
Fig.4
1
2
Fig.5
1
2
Fig.6
12
3
Fig.7
Fig.8
2
3 ENGLISH
ENGLISH (Original instructions)
SPECIFICATIONS
Model: M8100 M8101
Capacities Concrete 16 mm
Steel 13 mm
Wood 30 mm
No load speed 0 - 3,200 min-1
Blows per minute 0 - 48,000 min-1
Overall length 296 mm 295 mm
Net weight 2.1 kg 2.0 kg
Safety class /II
Due to our continuing program of research and development, the specications herein are subject to change without notice.
Specications may di󰀨er from country to country.
Weight according to EPTA-Procedure 01/2014
Intended use
The tool is intended for impact drilling in brick, concrete
and stone as well as for drilling without impact in wood,
metal, ceramic and plastic.
Power supply
The tool should be connected only to a power supply of
the same voltage as indicated on the nameplate, and
can only be operated on single-phase AC supply. They
are double-insulated and can, therefore, also be used
from sockets without earth wire.
Noise
The typical A-weighted noise level determined accord-
ing to EN62841-2-1:
Sound pressure level (LpA) : 98 dB(A)
Sound power level (LWA) : 109 dB (A)
Uncertainty (K) : 3 dB(A)
NOTE:
The declared noise emission value(s) has been
measured in accordance with a standard test method
and may be used for comparing one tool with another.
NOTE:
The declared noise emission value(s) may
also be used in a preliminary assessment of exposure.
WARNING: Wear ear protection.
WARNING: The noise emission during actual
use of the power tool can di󰀨er from the declared
value(s) depending on the ways in which the
tool is used especially what kind of workpiece is
processed.
WARNING: Be sure to identify safety mea-
sures to protect the operator that are based on an
estimation of exposure in the actual conditions of
use (taking account of all parts of the operating
cycle such as the times when the tool is switched
o󰀨 and when it is running idle in addition to the
trigger time).
Vibration
The vibration total value (tri-axial vector sum) deter-
mined according to EN62841-2-1:
Work mode: impact drilling into concrete
Vibration emission (a
h,ID) : 16.5 m/s2
Uncertainty (K) : 2.0 m/s
2
Work mode: drilling into metal
Vibration emission (a
h,D) : 3.0 m/s2
Uncertainty (K) : 1.5 m/s
2
NOTE: The declared vibration total value(s) has been
measured in accordance with a standard test method
and may be used for comparing one tool with another.
NOTE: The declared vibration total value(s) may also
be used in a preliminary assessment of exposure.
WARNING: The vibration emission during
actual use of the power tool can di󰀨er from the
declared value(s) depending on the ways in which
the tool is used especially what kind of workpiece
is processed.
WARNING: Be sure to identify safety mea-
sures to protect the operator that are based on an
estimation of exposure in the actual conditions of
use (taking account of all parts of the operating
cycle such as the times when the tool is switched
o󰀨 and when it is running idle in addition to the
trigger time).
EC Declaration of Conformity
For European countries only
The EC declaration of conformity is included as Annex A
to this instruction manual.


Product specificaties

Merk: Makita
Categorie: Klopboormachines
Model: M8100

Heb je hulp nodig?

Als je hulp nodig hebt met Makita M8100 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden