Makita M4501 Handleiding


Lees hieronder de ๐Ÿ“– handleiding in het Nederlandse voor Makita M4501 (8 pagina's) in de categorie Reciprozagen. Deze handleiding was nuttig voor 33 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/8
INSTRUCTION MANUAL
Recipro Saw
M4500
M4501
ENGLISH: Original instructions
DOUBLE INSULATION
Read before use.
2 ENGLISH
SPECIFICATIONS
Model: M4500 M4501
Length of stroke 28 mm
Strokes per minute 0 - 2,800 min
-1
Max. cutting capacities
(with 150 mm blade)
Pipe รธ130 mm
Wood 255 mm
Overall length 457 mm
Net weight 3.1 kg 3.2 kg
โ€ข๎€ƒ Due๎€ƒto๎€ƒour๎€ƒcontinuing๎€ƒprogram๎€ƒof๎€ƒresearch๎€ƒand๎€ƒdevelopment,๎€ƒthe๎€ƒspeci๎‚ฟcations๎€ƒherein๎€ƒare๎€ƒsubject๎€ƒto๎€ƒchange๎€ƒ
without notice.
โ€ข๎€ƒ Speci๎‚ฟcations๎€ƒmay๎€ƒdiffer๎€ƒfrom๎€ƒcountry๎€ƒto๎€ƒcountry.
โ€ข Weight according to EPTA-Procedure 01/2003
Symbols
The๎€ƒfollowing๎€ƒshow๎€ƒthe๎€ƒsymbols๎€ƒused๎€ƒfor๎€ƒthe๎€ƒequip-
ment.๎€ƒBe๎€ƒsure๎€ƒthat๎€ƒyou๎€ƒunderstand๎€ƒtheir๎€ƒmeaning๎€ƒbefore๎€ƒ
use.
Read instruction manual.
DOUBLE INSULATION
Only๎€ƒfor๎€ƒEU๎€ƒcountries๎€ƒ
Do๎€ƒnot๎€ƒdispose๎€ƒof๎€ƒelectric๎€ƒequipment๎€ƒ
together with household waste material! In
observance of the European Directive, on
Waste๎€ƒElectric๎€ƒand๎€ƒElectronic๎€ƒEquipment๎€ƒ
and its implementation in accordance with
national๎€ƒlaw,๎€ƒelectric๎€ƒequipment๎€ƒthat๎€ƒhave๎€ƒ
reached the end of their life must be col-
lected๎€ƒseparately๎€ƒand๎€ƒreturned๎€ƒto๎€ƒan๎€ƒenvi-
ronmentally๎€ƒcompatible๎€ƒrecycling๎€ƒfacility.
Intended use
The tool is intended for sawing wood, plastic, metal and
building materials with a strong impact. It is suitable for
straight and curved cutting.
Power supply
The๎€ƒtool๎€ƒshould๎€ƒbe๎€ƒconnected๎€ƒonly๎€ƒto๎€ƒa๎€ƒpower๎€ƒsupply๎€ƒof๎€ƒ
the same voltage as indicated on the nameplate, and
can๎€ƒonly๎€ƒbe๎€ƒoperated๎€ƒon๎€ƒsingle-phase๎€ƒAC๎€ƒsupply.๎€ƒThey๎€ƒ
are double-insulated and can, therefore, also be used
from sockets without earth wire.
Noise
The๎€ƒtypical๎€ƒA-weighted๎€ƒnoise๎€ƒlevel๎€ƒdetermined๎€ƒaccord-
ing to EN60745:
Model M4500
Sound pressure level (LpA) : 88 dB(A)
Sound power level (LWA) : 99 dB (A)
Uncertainty๎€ƒ(K)๎€ƒ:๎€ƒ3๎€ƒdB(A)
Model M4501
Sound pressure level (LpA) : 87 dB(A)
Sound power level (LWA) : 98 dB (A)
Uncertainty๎€ƒ(K)๎€ƒ:๎€ƒ3๎€ƒdB(A)
WARNING: Wear ear protection.
Vibration
The vibration total value (tri-axial vector sum) deter-
mined according to EN60745:
Model M4500
Work mode: cutting boards
Vibration emission (a
h,B) : 19.5 m/s2
Uncertainty๎€ƒ(K)๎€ƒ:๎€ƒ1.5๎€ƒm/s
2
Work mode: cutting wooden beams
Vibration emission (a
h,WB) 22.0 m/s2
Uncertainty๎€ƒ(K)๎€ƒ:๎€ƒ2.0๎€ƒm/s
2
Model M4501
Work mode: cutting boards
Vibration emission (a
h,B) : 19.5 m/s2
Uncertainty๎€ƒ(K)๎€ƒ:๎€ƒ1.5๎€ƒm/s
2
Work mode: cutting wooden beams
Vibration emission (a
h,WB) 22.0 m/s2
Uncertainty๎€ƒ(K)๎€ƒ:๎€ƒ2.0๎€ƒm/s
2
NOTE: The declared vibration emission value has
been measured in accordance with the standard test
method๎€ƒand๎€ƒmay๎€ƒbe๎€ƒused๎€ƒfor๎€ƒcomparing๎€ƒone๎€ƒtool๎€ƒwith๎€ƒ
another.
NOTE: The declared vibration emission value
may๎€ƒalso๎€ƒbe๎€ƒused๎€ƒin๎€ƒa๎€ƒpreliminary๎€ƒassessment๎€ƒof๎€ƒ
exposure.
WARNING: The vibration emission during actual
use of the power tool can differ from the declared
emission๎€ƒvalue๎€ƒdepending๎€ƒon๎€ƒthe๎€ƒways๎€ƒin๎€ƒwhich๎€ƒthe๎€ƒ
tool is used.
WARNING:๎€ƒBe๎€ƒsure๎€ƒto๎€ƒidentify๎€ƒsafety๎€ƒmeasures๎€ƒ
to protect the operator that are based on an estima-
tion of exposure in the actual conditions of use (taking
account๎€ƒof๎€ƒall๎€ƒparts๎€ƒof๎€ƒthe๎€ƒoperating๎€ƒcycle๎€ƒsuch๎€ƒas๎€ƒ
the times when the tool is switched off and when it is
running idle in addition to the trigger time).
EC Declaration of Conformity
For European countries only
Makita declares that the following Machine(s):
Designation of Machine: Recipro Saw
Model๎€ƒNo./๎€ƒType:๎€ƒM4500,๎€ƒM4501
Conforms๎€ƒto๎€ƒthe๎€ƒfollowing๎€ƒEuropean๎€ƒDirectives:๎€ƒ
2006/42/EC
3 ENGLISH
They๎€ƒare๎€ƒmanufactured๎€ƒin๎€ƒaccordance๎€ƒwith๎€ƒthe๎€ƒfollowing๎€ƒ
standard or standardized documents: EN60745
The๎€ƒtechnical๎€ƒ๎‚ฟle๎€ƒin๎€ƒaccordance๎€ƒwith๎€ƒ2006/42/EC๎€ƒis๎€ƒ
available from:
Makita, Jan-Baptist Vinkstraat 2, 3070, Belgium
24.8.2015
Yasushi๎€ƒFukaya
Director
Makita, Jan-Baptist Vinkstraat 2, 3070, Belgium
General power tool safety warnings
WARNING: Read all safety warnings and
all instructions. Failure to follow the warnings and
instructions๎€ƒmay๎€ƒresult๎€ƒin๎€ƒelectric๎€ƒshock,๎€ƒ๎‚ฟre๎€ƒand/or๎€ƒ
serious๎€ƒinjury.
Save all warnings and instruc-
tions for future reference.
The๎€ƒterm๎€ƒ"power๎€ƒtool"๎€ƒin๎€ƒthe๎€ƒwarnings๎€ƒrefers๎€ƒto๎€ƒyour๎€ƒ
mains-operated๎€ƒ(corded)๎€ƒpower๎€ƒtool๎€ƒor๎€ƒbattery-operated๎€ƒ
(cordless) power tool.
Work area safety
1. Keep work area clean and well lit.๎€ƒCluttered๎€ƒor๎€ƒ
dark areas invite accidents.
2. Do not operate power tools in explosive atmo-
spheres, such as in the presence of ๎ƒ€ammable
liquids, gases or dust. Power tools create sparks
which๎€ƒmay๎€ƒignite๎€ƒthe๎€ƒdust๎€ƒor๎€ƒfumes.
3. Keep children and bystanders away while
operating a power tool. Distractions can cause
you๎€ƒto๎€ƒlose๎€ƒcontrol.
Electrical Safety
1. Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any
adapter plugs with earthed (grounded) power
tools. Unmodi๎‚ฟed๎€ƒplugs๎€ƒand๎€ƒmatching๎€ƒoutlets๎€ƒwill๎€ƒ
reduce risk of electric shock.
2. Avoid body contact with earthed or grounded
surfaces such as pipes, radiators, ranges and
refrigerators. There is an increased risk of elec-
tric๎€ƒshock๎€ƒif๎€ƒyour๎€ƒbody๎€ƒis๎€ƒearthed๎€ƒor๎€ƒgrounded.
3. Do not expose power tools to rain or wet con-
ditions. Water entering a power tool will increase
the risk of electric shock.
4. Do not abuse the cord. Never use the cord for
carrying, pulling or unplugging the power tool.
Keep cord away from heat, oil, sharp edges
or moving parts. Damaged or entangled cords
increase the risk of electric shock.
5.
When operating a power tool outdoors, use an
extension cord suitable for outdoor use. Use of a cord
suitable for outdoor use reduces the risk of electric shock.
6. If operating a power tool in a damp location
is unavoidable, use a residual current device
(RCD) protected supply.๎€ƒUse๎€ƒof๎€ƒan๎€ƒRCD๎€ƒreduces๎€ƒ
the risk of electric shock.
7. Use of power supply via an RCD with a rated
residual current of 30 mA or less is always
recommended.
Personal Safety
1. Stay alert, watch what you are doing and use
common sense when operating a power tool.
Do not use a power tool while you are tired or
under the in๎ƒ€uence of drugs, alcohol or med-
ication. A moment of inattention while operating
power๎€ƒtools๎€ƒmay๎€ƒresult๎€ƒin๎€ƒserious๎€ƒpersonal๎€ƒinjury.
2.
Use personal protective equipment. Always wear eye
protection.๎€ƒProtective๎€ƒequipment๎€ƒsuch๎€ƒas๎€ƒdust๎€ƒmask,๎€ƒnon-
skid๎€ƒsafety๎€ƒshoes,๎€ƒhard๎€ƒhat,๎€ƒor๎€ƒhearing๎€ƒprotection๎€ƒused๎€ƒfor๎€ƒ
appropriate๎€ƒconditions๎€ƒwill๎€ƒreduce๎€ƒpersonal๎€ƒinjuries.
3. Prevent unintentional starting. Ensure the
switch is in the off-position before connecting
to power source and/or battery pack, picking
up or carrying the tool.๎€ƒCarrying๎€ƒpower๎€ƒtools๎€ƒwith๎€ƒ
your๎€ƒ๎‚ฟnger๎€ƒon๎€ƒthe๎€ƒswitch๎€ƒor๎€ƒenergising๎€ƒpower๎€ƒtools๎€ƒ
that have the switch on invites accidents.
4. Remove any adjusting key or wrench before
turning the power tool on.๎€ƒA๎€ƒwrench๎€ƒor๎€ƒa๎€ƒkey๎€ƒleft๎€ƒ
attached๎€ƒto๎€ƒa๎€ƒrotating๎€ƒpart๎€ƒof๎€ƒthe๎€ƒpower๎€ƒtool๎€ƒmay๎€ƒ
result๎€ƒin๎€ƒpersonal๎€ƒinjury.
5. Do not overreach. Keep proper footing and
balance at all times. This enables better control
of the power tool in unexpected situations.
6. Dress properly. Do not wear loose clothing or
jewellery. Keep your hair, clothing, and gloves
away from moving parts.๎€ƒLoose๎€ƒclothes,๎€ƒjewel-
lery๎€ƒor๎€ƒlong๎€ƒhair๎€ƒcan๎€ƒbe๎€ƒcaught๎€ƒin๎€ƒmoving๎€ƒparts.
7. If devices are provided for the connection of
dust extraction and collection facilities, ensure
these are connected and properly used. Use of
dust collection can reduce dust-related hazards.
Power tool use and care
1. Do not force the power tool. Use the correct
power tool for your application. The correct
power๎€ƒtool๎€ƒwill๎€ƒdo๎€ƒthe๎€ƒjob๎€ƒbetter๎€ƒand๎€ƒsafer๎€ƒat๎€ƒthe๎€ƒ
rate for which it was designed.
2.
Do not use the power tool if the switch does not turn
it on and off.๎€ƒAny๎€ƒpower๎€ƒtool๎€ƒthat๎€ƒcannot๎€ƒbe๎€ƒcontrolled๎€ƒ
with the switch is dangerous and must be repaired.
3.
Disconnect the plug from the power source and/or
the battery pack from the power tool before making
any adjustments, changing accessories, or storing
power tools.๎€ƒSuch๎€ƒpreventive๎€ƒsafety๎€ƒmeasures๎€ƒreduce๎€ƒ
the๎€ƒrisk๎€ƒof๎€ƒstarting๎€ƒthe๎€ƒpower๎€ƒtool๎€ƒaccidentally.
4. Store idle power tools out of the reach of chil-
dren and do not allow persons unfamiliar with
the power tool or these instructions to operate
the power tool. Power tools are dangerous in the
hands of untrained users.
5. Maintain power tools. Check for misalignment
or binding of moving parts, breakage of parts
and any other condition that may affect the
power toolโ€™s operation. If damaged, have the
power tool repaired before use.๎€ƒMany๎€ƒaccidents๎€ƒ
are๎€ƒcaused๎€ƒby๎€ƒpoorly๎€ƒmaintained๎€ƒpower๎€ƒtools.
6. Keep cutting tools sharp and clean.๎€ƒProperly๎€ƒ
maintained cutting tools with sharp cutting edges
are๎€ƒless๎€ƒlikely๎€ƒto๎€ƒbind๎€ƒand๎€ƒare๎€ƒeasier๎€ƒto๎€ƒcontrol.
7.
Use the power tool, accessories and tool bits etc.
in accordance with these instructions, taking into
account the working conditions and the work to be
performed. Use of the power tool for operations different
from those intended could result in a hazardous situation.


Product specificaties

Merk: Makita
Categorie: Reciprozagen
Model: M4501
Kleur van het product: Black, Red
Gewicht: 3200 g
Stroombron: AC
Soft grip: Ja
Input vermogen: 1010 W
Geluidsdrukniveau: 87 dB
Zaagblad wisselen zonder gereedschap: Ja
Vibratie emissie: 1.5 m/sยฒ
Snij-diepte in hout: 255 mm
Slag lengte: 280 mm
AC-ingangsspanning: 240 V
Geluidsvermogensniveau: 98 dB
Slagfrequentie: 2800 spm
Snijdiepte in metalen profielen/pijpen: 130 mm
Geluidsniveau (buiten gebruik): 3 dB
Trillingsniveau (houten balk): 22 m/sยฒ

Heb je hulp nodig?

Als je hulp nodig hebt met Makita M4501 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden