Makita JS1000 Handleiding

Makita Schaar JS1000

Lees hieronder de 📖 handleiding in het Nederlandse voor Makita JS1000 (28 pagina's) in de categorie Schaar. Deze handleiding was nuttig voor 44 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/28

GB Metal Shear/ Straight Metal Shear INSTRUCTION MANUAL

UA Ножиці для різання металу /

Прямі ножиці для різання металу ІНСТРУКЦІЯ ЕКСПЛУАТАЦІЇ З

PL Nożyce do blachy INSTRUKCJA OBSŁUGI

Foarfece pentru metal / Foarfece drept pentru metal

MANUAL DE INSTRUCŢIUNI

DE Blechschere BEDIENUNGSANLEITUNG

Lemezvágó olló / lemezvágó olló egyenes vágáshoz

HASZNÁLATI KÉZIKÖNYV

Kovové nožnice / Rovné kovové nožnice

NÁVOD NA OBSLUHU

Nůžky na plech / přímé nůžky na plech

NÁVOD K OBSLUZE

JS1000

JS1601

1 011064

2 011061

3 011062

4 011063

5 011060 6 011065

7 011066

ENGLISH (Original instructions)

Explanation of general view

1-1. Switch lever

2-1. Hex wrench

2-2. Screw

3-1. Thickness gauge

3-2. Center blade

3-3. Side blade

3-4. Hex socket head bolt

3-5. Hex wrench

4-1. Hex wrench

5-1. Pin

SPECIFICATIONS

Model JS1000 JS1601

Steel up to 400 N/mm2 1.0 mm (20 ga.) 1.6 mm (16 ga.)

Steel up to 600 N/mm2 0.7 mm (23 ga.) 1.2 mm (18 ga.)

Steel up to 800 N/mm2 0.5 mm (26 ga.) 0.8 mm (21 ga.)

Max. cutting capacities

Aluminum up to 200 N/mm

2 2.5 mm (12 ga.) 2.5 mm (12 ga.)

Min. cutting radius 30 mm 250 mm

Strokes per minute (min

-1) 4,500

Overall length 322 mm 320 mm

Net weight 1.4 kg

Safety class /II

• Due to our continuing program of research and development, the specifications herein are subject to change without notice.

• Specifications may differ from country to country.

• Weight according to EPTA-Procedure 01/2003

ENE037-1

Intended use

The tool is intended for cutting sheet steel and stainless

sheet steel.

ENF002-1

Power supply

The tool should be connected only to a power supply of

the same voltage as indicated on the nameplate, and can

only be operated on single-phase AC supply. They are

double-insulated in accordance with European Standard

and can, therefore, also be used from sockets without

earth wire.

ENG104-2

Noise

The typical A-weighted noise level determined according

to EN60745:

Sound pressure level (L

pA) : 77 dB(A)

Uncertainty (K) : 3 dB(A)

The noise level under working may exceed 80 dB (A).

Wear ear protection.

ENG218-2

Vibration

The vibration total value (tri-axial vector sum) determined

according to EN60745:

Work mode : cutting sheet metal

Vibration emission (ah) : 9.5 m/s2

Uncertainty (K) : 1.5 m/s2

ENG901-1

• The declared vibration emission value has been

measured in accordance with the standard test

method and may be used for comparing one tool

with another.

• The declared vibration emission value may also be

used in a preliminary assessment of exposure.

WARNING:

• The vibration emission during actual use of the

power tool can differ from the declared emission

value depending on the ways in which the tool is

used.

• Be sure to identify safety measures to protect the

operator that are based on an estimation of

exposure in the actual conditions of use (taking

account of all parts of the operating cycle such as

the times when the tool is switched off and when it

is running idle in addition to the trigger time).

ENH101-14

For European countries only

EC Declaration of Conformity

We Makita Corporation as the responsible

manufacturer declare that the following Makita

machine(s):

Designation of Machine:

Metal Shear, Straight Metal Shea

Model No./ Type: JS1000, JS1601

are of series production and

Conforms to the following European Directives:

2006/42/EC

And are manufactured in accordance with the following

standards or standardised documents:

EN60745

The technical documentation is kept by our authorised

representative in Europe who is:

Makita International Europe Ltd,

Michigan, Drive, Tongwell,

Milton Keynes, MK15 8JD, England

Product specificaties

Merk:	Makita
Categorie:	Schaar
Model:	JS1000
Kleur van het product:	Black, Blue
Gewicht:	1400 g
Breedte:	70 mm
Diepte:	322 mm
Hoogte:	78 mm
Stroombron:	AC
Input vermogen:	380 W
Stationair aantal zaagbewegingen (max):	4500 spm
Snijcapaciteit in aluminium (250 N/mm²):	2.5 mm
Snijcapaciteit in staal (600 N/mm²):	0.7 mm
Snijcapaciteit in staal (400 N/mm²):	1 mm
Minimale snijradius:	30 mm
Snijcapaciteit in staal (800 N/mm²):	0.5 mm