Makita GA5021 Handleiding

Makita Slijpmachine GA5021

Lees hieronder de 📖 handleiding in het Nederlandse voor Makita GA5021 (16 pagina's) in de categorie Slijpmachine. Deze handleiding was nuttig voor 80 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/16

ENGLISH (Original instructions)

INSTRUCTION MANUAL

DOUBLE INSULATION

IMPORTANT: Read Before Using.

Angle Grinder

GA5020

GA5020C

GA5021

GA5021C

GA6020

GA6020C

GA6021

GA6021C

008074

ENGLISH (Original instructions)

SPECIFICATIONS

Model GA5020 GA5021 GA5020C/

GA5021C GA6020 GA6021 GA6020C/

GA6021C

Depressed center wheel diameter 125 mm 125 mm 125 mm 150 mm 150 mm 150 mm

Max. wheel thickness 6.4 mm 6.4 mm 6.4 mm 6.4 mm 6.4 mm 6.4 mm

Spindle thread M14 M14 M14 M14 M14 M14

No load speed (no) / Rated speed (n)

12,000 min

-1

12,000 min

-1

10,000 min

-1

10,000 min

-1

10,000 min

-1

9,000 min

-1

Overall length 356 mm 384 mm 390 mm 356 mm 384 mm 390 mm

Net weight 2.7 kg 2.7 kg 2.9 kg 3.0 kg 2.8 kg 3.0 kg

Safety class /II

• Due to our continuing program of research and development, the specifications herein are subject to change without notice.

• Specifications may differ from country to country.

• Weight according to EPTA-Procedure 01/2003

END202-7

Symbols

The following show the symbols used for the equipment.

Be sure that you understand their meaning before use.

･ Read instruction manual.

･ DOUBLE INSULATION

･ Wear safety glasses.

･ Only for EU countries

Do not dispose of electric equipment

together with household waste

material!

In observance of European Directive

2012/19/EU on waste electric and

electronic equipment and its

implementation in accordance with

national law, electric equipment that

have reached the end of their life must

be collected separately and returned to

an environmentally compatible

recycling facility.

ENE048-1

Intended use

The tool is intended for grinding, sanding and cutting of

metal and stone materials without the use of water.

ENF002-2

Power supply

The tool should be connected only to a power supply of

the same voltage as indicated on the nameplate, and

can only be operated on single-phase AC supply. They

are double-insulated and can, therefore, also be used

from sockets without earth wire.

ENG905-1

Noise

The typical A-weighted noise level determined

according to EN60745:

Model GA5020,GA6020 and GA6021

Sound pressure level (L

pA ) : 89 dB(A)

Sound power level (L

WA) : 100 dB(A)

Uncertainty (K) : 3 dB(A)

Model GA5020C,GA5021,GA5021C and

GA6021C

Sound pressure level (L

pA ) : 90 dB(A)

Sound power level (L

WA) : 101 dB(A)

Uncertainty (K) : 3 dB(A)

Wear ear protection

ENG900-1

Vibration

The vibration total value (tri-axial vector sum)

determined according to EN60745:

Model GA6021

Work mode : surface grinding

Vibration emission (ah,AG) : 6.5 m/s2

Uncertainty (K) : 1.5 m/s2

Work mode : disc sanding

Vibration emission (ah,DS) : 2.5 m/s2

Uncertainty (K) : 1.5 m/s2

Model GA5021C

Work mode : surface grinding

Vibration emission (ah,AG) : 8.5 m/s2

Uncertainty (K) : 1.5 m/s2

Work mode: disc sanding

Vibration emission (ah,DS) : 2.5 m/s2 or less

Uncertainty (K) : 1.5 m/s

Model GA6021C

Work mode : surface grinding

Vibration emission (ah,AG

) : 8.5 m/s2

Uncertainty (K) : 1.5 m/s

Work mode : disc sanding

Vibration emission (ah,DS) : 2.5 m/s2

Uncertainty (K) : 1.5 m/s

Model GA5020

Work mode : surface grinding

Vibration emission (ah,AG

) : 9.0 m/s2

Uncertainty (K) : 1.5 m/s

Work mode: disc sanding

Vibration emission (ah,DS) : 2.5 m/s2 or less

Uncertainty (K) : 1.5 m/s

Model GA5020C

Work mode : surface grinding

Vibration emission (ah,AG

) : 9.5 m/s2

Uncertainty (K) : 1.5 m/s

Work mode: disc sanding

Vibration emission (ah,DS) : 2.5 m/s2 or less

Uncertainty (K) : 1.5 m/s

Model GA6020

Work mode : surface grinding

Vibration emission (ah,AG

) : 10.0 m/s2

Uncertainty (K) : 1.5 m/s

Work mode: disc sanding

Vibration emission (ah,DS) : 2.5 m/s2 or less

Uncertainty (K) : 1.5 m/s

Model GA5021

Work mode : surface grinding

Vibration emission (ah,AG

) : 13.5 m/s2

Uncertainty (K) : 1.5 m/s

Work mode: disc sanding

Vibration emission (ah,DS) : 2.5 m/s2 or less

Uncertainty (K) : 1.5 m/s

ENG902-1

• The declared vibration emission value has been

measured in accordance with the standard test

method and may be used for comparing one tool

with another.

• The declared vibration emission value may also be

used in a preliminary assessment of exposure.

• The declared vibration emission value is used for

main applications of the power tool. However if the

power tool is used for other applications, the

vibration emission value may be different.

WARNING:

• The vibration emission during actual use of the

power tool can differ from the declared emission

value depending on the ways in which the tool is

used.

• Be sure to identify safety measures to protect the

operator that are based on an estimation of

exposure in the actual conditions of use (taking

account of all parts of the operating cycle such as

the times when the tool is switched off and when it

is running idle in addition to the trigger time).

ENH101-16

For European countries only

EC Declaration of Conformity

We Makita Corporation as the responsible

manufacturer declare that the following Makita

machine(s):

Designation of Machine:

Angle Grinder

Model No./ Type:

GA5020,GA5020C,GA5021,GA5021C,GA6020,GA6021,

GA6021C

are of series production and

Conforms to the following European Directives:

2006/42/EC

And are manufactured in accordance with the following

standards or standardised documents:

EN60745

The technical documentation is kept by:

Makita International Europe Ltd.

Technical Department,

Michigan Drive, Tongwell,

Milton Keynes, Bucks MK15 8JD, England

30.1.2009

000230

Tomoyasu Kato

Director

Makita Corporation

3-11-8, Sumiyoshi-cho,

Anjo, Aichi, 446-8502, JAPAN

Product specificaties

Merk:	Makita
Categorie:	Slijpmachine
Model:	GA5021
Kleur van het product:	Blauw
Gewicht:	2500 g
Stroombron:	AC
Input vermogen:	1050 W
Stationair toerental (max):	11000 RPM
Grinding disc diameter:	125 mm