Makita GA004G Handleiding

Makita Niet gecategoriseerd GA004G

Lees hieronder de 📖 handleiding in het Nederlandse voor Makita GA004G (20 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 109 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/20
INSTRUCTION MANUAL
Cordless Angle Grinder
GA003G
GA004G
GA005G
GA006G
GA007G
GA008G
ENGLISH: Original instructions
Read before use.
2 ENGLISH
SPECIFICATIONS
Model: GA003G GA004G GA005G GA006G GA007G GA008G
Wheel diameter 100 mm
(4″)
115 mm
(4-1/2″)
125 mm
(5″)
100mm
(4″)
115 mm
(4-1/2″)
125 mm
(5″)
Max. wheel thickness 6.4 mm 7.2 mm 6.4 mm 7.2 mm
Spindle thread M10 M14 or 5/8″
(country speciîš¿c)
M10 M14 or 5/8″
(country speciîš¿c)
Rated speed (n) 8,500 min-1
Overall length with BL4025 398 mm
with BL4040 410 mm
Net weight
2.8 - 3.3 kg 2.9 - 3.5 kg 2.9 - 3.6 kg 2.7 - 3.3 kg
2.9 - 3.5 kg
Rated voltage D.C. 36 V - 40 V max
• Due to our continuing program of research and development, the specications herein are subject to change
without notice.
• Specications may di󰀨er from country to country.
• The weight may di󰀨er depending on the attachment(s), including the battery cartridge. The lightest and heavi-
est combination, according to EPTA-Procedure 01/2014, are shown in the table.
Applicable battery cartridge and charger
Battery cartridge BL4025 / BL4040
Charger DC40RA
• Some of the battery cartridges and chargers listed above may not be available depending on your region of
residence.
WARNING: Only use the battery cartridges and chargers listed above. Use of any other battery cartridges
and chargers may cause injury and/or îš¿re.
Symbols
The followings show the symbols used for the equip-
ment. Be sure that you understand their meaning before
use.
Read instruction manual.
Wear safety glasses.
Ni-MH
Li-ion
Only for EU countries
Do not dispose of electric equipment or
battery pack together with household waste
material!
In observance of the European Directives,
on Waste Electric and Electronic
Equipment and Batteries and Accumulators
and Waste Batteries and Accumulators
and their implementation in accordance
with national laws, electric equipment and
batteries and battery pack(s) that have
reached the end of their life must be col-
lected separately and returned to an envi-
ronmentally compatible recycling facility.
Intended use
The tool is intended for grinding, sanding and cutting of
metal and stone materials without the use of water.
Noise
The typical A-weighted noise level determined according to EN60745-2-3:
Model Sound pressure
level (LpA) : (dB(A))
Sound power level
(LWA) : (dB(A))
Uncertainty (K) :
(dB(A))
GA003G 81 92 3
GA004G 81 92 3
GA005G 81 92 3
GA006G 81 92 3
GA007G 81 92 3
GA008G 81 92 3
3 ENGLISH
NOTE: The declared noise emission value(s) has been measured in accordance with a standard test method and
may be used for comparing one tool with another.
NOTE: The declared noise emission value(s) may also be used in a preliminary assessment of exposure.
WARNING: Wear ear protection.
WARNING: The noise emission during actual use of the power tool can di󰀨er from the declared val-
ue(s) depending on the ways in which the tool is used especially what kind of workpiece is processed.
WARNING: Be sure to identify safety measures to protect the operator that are based on an estimation
of exposure in the actual conditions of use (taking account of all parts of the operating cycle such as the
times when the tool is switched o󰀨 and when it is running idle in addition to the trigger time).
Vibration
The vibration total value (tri-axial vector sum) determined according to EN60745-2-3:
Work mode: surface grinding with normal side grip
Model
Vibration emission (ah,
AG) : (m/s2)
Uncertainty (K) : (m/s2)
GA003G 5.0 1.5
GA004G 5.5 1.5
GA005G 6.5 1.5
GA006G 5.0 1.5
GA007G 5.5 1.5
GA008G 6.5 1.5
Work mode: surface grinding with anti vibration side grip
Model
Vibration emission (ah,
AG) : (m/s2)
Uncertainty (K) : (m/s2)
GA003G 5.5 1.5
GA004G 5.5 1.5
GA005G 5.5 1.5
GA006G 5.5 1.5
GA007G 5.5 1.5
GA008G 5.5 1.5
Work mode: disc sanding with normal side grip
Model
Vibration emission (ah,
AG) : (m/s2)
Uncertainty (K) : (m/s2)
GA003G 2.5 m/s2 or less 1.5
GA004G 2.5 m/s2 or less 1.5
GA005G 2.5 1.5
GA006G 2.5 m/s2 or less 1.5
GA007G 2.5 m/s2 or less 1.5
GA008G 2.5 1.5
Work mode: disc sanding with anti vibration side grip
Model
Vibration emission (ah,
AG) : (m/s2)
Uncertainty (K) : (m/s2)
GA003G 2.5 m/s2 or less 1.5
GA004G 2.5 m/s2 or less 1.5
GA005G 3.0 1.5
GA006G 2.5 m/s2 or less 1.5
GA007G 2.5 m/s2 or less 1.5
GA008G 3.0 1.5
NOTE: The declared vibration total value(s) has been measured in accordance with a standard test method and
may be used for comparing one tool with another.
NOTE: The declared vibration total value(s) may also be used in a preliminary assessment of exposure.

Product specificaties

Merk: Makita
Categorie: Niet gecategoriseerd
Model: GA004G

Heb je hulp nodig?

Als je hulp nodig hebt met Makita GA004G stel dan hieronder een vraag en andere gebruikers zullen je antwoorden


Handleiding Niet gecategoriseerd Makita

Makita

Makita RM350D Handleiding

8 April 2024
Makita

Makita WT001G Handleiding

8 April 2024
Makita

Makita ADP10 Handleiding

8 April 2024
Makita

Makita BL4025 Handleiding

5 Maart 2024
Makita

Makita BL1820B Handleiding

5 Maart 2024
Makita

Makita BL1830B Handleiding

5 Maart 2024
Makita

Makita BL1016 Handleiding

5 Maart 2024
Makita

Makita BL1021B Handleiding

5 Maart 2024
Makita

Makita BL1860B Handleiding

5 Maart 2024
Makita

Makita BL4080F Handleiding

5 Maart 2024

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd

Bauknecht

Bauknecht KSI 18GF2 P2 Handleiding

27 April 2024
Fakir

Fakir Artemis TS 150 Handleiding

26 April 2024
Sony

Sony UTX-M03 Handleiding

26 April 2024
Sony

Sony URX-P03 Handleiding

26 April 2024
Sony

Sony WRU-806B Handleiding

26 April 2024
Sony

Sony UTX-B03 Handleiding

26 April 2024
Sony

Sony UTX-P03 Handleiding

26 April 2024
Sony

Sony ODS-L10 Handleiding

26 April 2024
Sony

Sony PDW-U4 Handleiding

26 April 2024
Sony

Sony NXL-FR318 Handleiding

26 April 2024