Makita DPO600RTE Handleiding
Makita
Polijstmachine
DPO600RTE
Lees hieronder de 📖 handleiding in het Nederlandse voor Makita DPO600RTE (12 pagina's) in de categorie Polijstmachine. Deze handleiding was nuttig voor 25 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld
Pagina 1/12
INSTRUCTION MANUAL
Cordless Random Orbit Polisher
DPO500
DPO600
ENGLISH: Original instructions
Read before use.
2 ENGLISH
SPECIFICATIONS
Model: DPO500 DPO600
Backing pad diameter 123 mm 148 mm
Orbits per minute Normal mode 0 - 6,800 min
-1
Finishing mode 0 - 5,200 min
-1
Overall length 530 mm
Rated voltage D.C. 18 V
Net weight 3.1 - 3.6 kg
•
Due to our continuing program of research and development, the speciî‚¿cations herein are subject to change without notice.
• Specications and battery cartridge may differ from country to country.
• The weight may differ depending on the attachment(s), including the battery cartridge. The lightest and heavi-
est combinations, according to EPTA-Procedure 01/2014, are shown in the table.
Applicable battery cartridge and charger
Battery cartridge BL1815N / BL1820 / BL1820B / BL1830 / BL1830B / BL1840 /
BL1840B / BL1850 / BL1850B / BL1860B
Charger DC18RC / DC18RD / DC18RE / DC18SD / DC18SE / DC18SF
•
Some of the battery cartridges and chargers listed above may not be available depending on your region of residence.
WARNING: Only use the battery cartridges and chargers listed above. Use of any other battery cartridges
and chargers may cause injury and/or î‚¿re.
Symbols
The followings show the symbols used for the equipment.
Be sure that you understand their meaning before use.
Read instruction manual.
Ni-MH
Li-ion
Only for EU countries
Do not dispose of electric equipment or
battery pack together with household waste
material!
In observance of the European Directives,
on Waste Electric and Electronic
Equipment and Batteries and Accumulators
and Waste Batteries and Accumulators
and their implementation in accordance
with national laws, electric equipment and
batteries and battery pack(s) that have
reached the end of their life must be col-
lected separately and returned to an envi-
ronmentally compatible recycling facility.
Intended use
The tool is intended for polishing.
Noise
The typical A-weighted noise level determined accord-
ing to EN62841-2-4:
Model DPO500
Sound pressure level (L
pA) : 82 dB(A)
Sound power level (L
WA) : 93 dB (A)
Uncertainty (K) : 3 dB(A)
Model DPO600
Sound pressure level (L
pA) : 83 dB(A)
Sound power level (L
WA) : 94 dB (A)
Uncertainty (K) : 3 dB(A)
NOTE: The declared noise emission value(s) has
been measured in accordance with a standard test
method and may be used for comparing one tool with
another.
NOTE: The declared noise emission value(s)
may also be used in a preliminary assessment of
exposure.
WARNING: Wear ear protection.
WARNING: The noise emission during actual
use of the power tool can differ from the declared
value(s) depending on the ways in which the
tool is used especially what kind of workpiece is
processed.
WARNING: Be sure to identify safety mea-
sures to protect the operator that are based on an
estimation of exposure in the actual conditions of
use (taking account of all parts of the operating
cycle such as the times when the tool is switched
off and when it is running idle in addition to the
trigger time).
Vibration
The vibration total value (tri-axial vector sum) deter-
mined according to EN62841-2-4:
Model DPO500
Work mode: polishing
Vibration emission (a
h, P) : 9.5 m/s2
Uncertainty (K) : 1.5 m/s
2
Model DPO600
Work mode: polishing
Vibration emission (a
h, P) : 10.0 m/s2
Uncertainty (K) : 1.5 m/s
2
3 ENGLISH
NOTE: The declared vibration total value(s) has been
measured in accordance with a standard test method
and may be used for comparing one tool with another.
NOTE: The declared vibration total value(s) may also
be used in a preliminary assessment of exposure.
WARNING: The vibration emission during
actual use of the power tool can differ from the
declared value(s) depending on the ways in which
the tool is used especially what kind of workpiece
is processed.
WARNING: Be sure to identify safety mea-
sures to protect the operator that are based on an
estimation of exposure in the actual conditions of
use (taking account of all parts of the operating
cycle such as the times when the tool is switched
off and when it is running idle in addition to the
trigger time).
EC Declaration of Conformity
For European countries only
The EC declaration of conformity is included as Annex A
to this instruction manual.
SAFETY WARNINGS
General power tool safety warnings
WARNING:
Read all safety warnings, instruc-
tions, illustrations and speciî‚¿cations provided with this
power tool. Failure to follow all instructions listed below
may result in electric shock, î‚¿re and/or serious injury.
Save all warnings and instruc-
tions for future reference.
The term "power tool" in the warnings refers to your
mains-operated (corded) power tool or battery-operated
(cordless) power tool.
Work area safety
1. Keep work area clean and well lit. Cluttered or
dark areas invite accidents.
2. Do not operate power tools in explosive atmo-
spheres, such as in the presence of ammable
liquids, gases or dust. Power tools create sparks
which may ignite the dust or fumes.
3. Keep children and bystanders away while
operating a power tool. Distractions can cause
you to lose control.
Electrical Safety
1. Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any
adapter plugs with earthed (grounded) power
tools. Unmodiî‚¿ed plugs and matching outlets will
reduce risk of electric shock.
2. Avoid body contact with earthed or grounded
surfaces, such as pipes, radiators, ranges and
refrigerators. There is an increased risk of elec-
tric shock if your body is earthed or grounded.
3. Do not expose power tools to rain or wet con-
ditions. Water entering a power tool will increase
the risk of electric shock.
4. Do not abuse the cord. Never use the cord for
carrying, pulling or unplugging the power tool.
Keep cord away from heat, oil, sharp edges
or moving parts. Damaged or entangled cords
increase the risk of electric shock.
5. When operating a power tool outdoors, use an
extension cord suitable for outdoor use. Use of
a cord suitable for outdoor use reduces the risk of
electric shock.
6. If operating a power tool in a damp location
is unavoidable, use a residual current device
(RCD) protected supply. Use of an RCD reduces
the risk of electric shock.
7.
Power tools can produce electromagnetic î‚¿elds
(EMF) that are not harmful to the user. However,
users of pacemakers and other similar medical
devices should contact the maker of their device and/
or doctor for advice before operating this power tool.
Personal Safety
1. Stay alert, watch what you are doing and use
common sense when operating a power tool.
Do not use a power tool while you are tired or
under the inuence of drugs, alcohol or med-
ication. A moment of inattention while operating
power tools may result in serious personal injury.
2. Use personal protective equipment. Always
wear eye protection. Protective equipment such
as a dust mask, non-skid safety shoes, hard hat or
hearing protection used for appropriate conditions
will reduce personal injuries.
3. Prevent unintentional starting. Ensure the
switch is in the off-position before connecting
to power source and/or battery pack, picking
up or carrying the tool. Carrying power tools with
your î‚¿nger on the switch or energising power tools
that have the switch on invites accidents.
4. Remove any adjusting key or wrench before
turning the power tool on. A wrench or a key left
attached to a rotating part of the power tool may
result in personal injury.
5. Do not overreach. Keep proper footing and
balance at all times. This enables better control
of the power tool in unexpected situations.
6. Dress properly. Do not wear loose clothing or
jewellery. Keep your hair and clothing away
from moving parts. Loose clothes, jewellery or
long hair can be caught in moving parts.
7. If devices are provided for the connection of
dust extraction and collection facilities, ensure
these are connected and properly used. Use of
dust collection can reduce dust-related hazards.
8.
Do not let familiarity gained from frequent use
of tools allow you to become complacent and
ignore tool safety principles. A careless action can
cause severe injury within a fraction of a second.
9. Always wear protective goggles to protect
your eyes from injury when using power tools.
The goggles must comply with ANSI Z87.1 in
the USA, EN 166 in Europe, or AS/NZS 1336
in Australia/New Zealand. In Australia/New
Zealand, it is legally required to wear a face
shield to protect your face, too.
Product specificaties
| Merk: | Makita |
| Categorie: | Polijstmachine |
| Model: | DPO600RTE |
Heb je hulp nodig?
Als je hulp nodig hebt met Makita DPO600RTE stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Polijstmachine Makita
26 Augustus 2023
17 April 2023
8 Februari 2023
7 Februari 2023
23 Januari 2023
Handleiding Polijstmachine
- Polijstmachine Bosch
- Polijstmachine DeWalt
- Polijstmachine Apa
- Polijstmachine Bartscher
- Polijstmachine Einhell
- Polijstmachine GlobalTronics
- Polijstmachine Gude
- Polijstmachine H.Koenig
- Polijstmachine Hikoki
- Polijstmachine Holzmann
- Polijstmachine Kalorik
- Polijstmachine Metabo
- Polijstmachine Milwaukee
- Polijstmachine Parkside
- Polijstmachine Powerplus
- Polijstmachine Ryobi
- Polijstmachine Silverline
- Polijstmachine Skil
- Polijstmachine Topcraft
- Polijstmachine Ultimate Speed
- Polijstmachine Vonroc
- Polijstmachine Westfalia
- Polijstmachine Zipper
- Polijstmachine Ozito
- Polijstmachine Black And Decker
- Polijstmachine Cocraft
- Polijstmachine Porter-Cable
- Polijstmachine Sun Joe
- Polijstmachine Craftsman
- Polijstmachine Rikon
- Polijstmachine Full Boar
- Polijstmachine Panduit
- Polijstmachine Einhell Bavaria
Nieuwste handleidingen voor Polijstmachine
19 Maart 2024
4 Maart 2024
10 Januari 2024
1 Augustus 2023
5 Juli 2023
21 Juni 2023
19 Juni 2023
19 Juni 2023
18 Juni 2023
17 Juni 2023