Makita DHR243RMJ Handleiding

Makita Boormachine DHR243RMJ

Lees hieronder de 📖 handleiding in het Nederlandse voor Makita DHR243RMJ (12 pagina's) in de categorie Boormachine. Deze handleiding was nuttig voor 64 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/12

ENGLISH (Original instructions)

INSTRUCTION MANUAL

IMPORTANT: Read Before Using.

Cordless Combination Hammer

DHR242

DHR243

012621

ENGLISH (Original instructions)

SPECIFICATIONS

Model DHR242 DHR243

Concrete 24 mm

Steel 13 mm Capacities

Wood 27 mm

No load speed (min

-1) 0 - 950

Blows per minute 0 - 4,700

Overall length 328 mm 353 mm

Net weight 3.3 kg 3.4 kg

Rated voltage D.C. 18 V

• Due to our continuing program of research and development, the specifications herein are subject to change without notice.

• Specifications and battery cartridge may differ from country to country.

• Weight, with battery cartridge, according to EPTA-Procedure 01/2003

END004-4

Symbols

The following show the symbols used for the equipment.

Be sure that you understand their meaning before use.

･ Read instruction manual.

･ Only for EU countries

Do not dispose of electric equipment or

battery pack together with household

waste material!

In observance of European Directive

2002/96/EC on waste electric and

electronic equipment, 2006/66/EC on

batteries and accumulators and waste

batteries and accumulators and their

implementation in accordance with

national laws, electric equipment and

battery pack that have reached the end

of their life must be collected separately

and returned to an environmentally

compatible recycling facility.

ENE043-1

Intended use

The tool is intended for hammer drilling and drilling in

brick, concrete and stone as well as for chiselling work.

It is also suitable for drilling without impact in wood, metal,

ceramic and plastic.

ENG905-1

Noise

The typical A-weighted noise level determined according

to EN60745:

Model DHR242

Sound pressure level (L

pA) : 90 dB (A)

Sound power level (L

WA) : 101 dB (A)

Uncertainty (K) : 3 dB (A)

Model DHR243

Sound pressure level (L

pA) : 89: dB (A)

Sound power level (L

WA) : 100 dB (A)

Uncertainty (K) : 3 dB (A)

Wear ear protection

ENG900-1

Vibration

The vibration total value (tri-axial vector sum) determined

according to EN60745:

Model DHR242

Work mode : hammer drilling into concrete

Vibration emission (ah,HD) : 13.5 m/s2

Uncertainty (K) : 1.5 m/s2

Work mode : chiselling

Vibration emission (ah,CHeq) : 10.5 m/s2

Uncertainty (K) : 1.5 m/s2

Work mode: drilling into metal

Vibration emission (ah,D) : 3.5 m/s

Uncertainty (K) : 1.5 m/s2

Model DHR243

Work mode : hammer drilling into concrete

Vibration emission (ah,HD) : 13 m/s2

Uncertainty (K) : 1.5 m/s2

Work mode : chiselling

Vibration emission (ah,CHeq) : 11 m/s2

Uncertainty (K) : 1.5 m/s2

Work mode: drilling into metal

Vibration emission (ah,D) : 2.5 m/s

2 or less

Uncertainty (K) : 1.5 m/s2

Ni-MH

Li-ion

ENG901-1

• The declared vibration emission value has been

measured in accordance with the standard test

method and may be used for comparing one tool

with another.

• The declared vibration emission value may also be

used in a preliminary assessment of exposure.

WARNING:

• The vibration emission during actual use of the

power tool can differ from the declared emission

value depending on the ways in which the tool is

used.

• Be sure to identify safety measures to protect the

operator that are based on an estimation of

exposure in the actual conditions of use (taking

account of all parts of the operating cycle such as

the times when the tool is switched off and when it

is running idle in addition to the trigger time).

ENH101-17

For European countries only

EC Declaration of Conformity

Makita declares that the following Machine(s):

Designation of Machine:

Cordless Combination Hammer

Model No./ Type: DHR242, DHR243

Conforms to the following European Directives:

2006/42/EC

They are manufactured in accordance with the following

standard or standardized documents:

EN60745

The technical file in accordance with 2006/42/EC is

available from:

Makita, Jan-Baptist Vinkstraat 2, 3070, Belgium

31.12.2013

000331

Yasushi Fukaya

Director

Makita, Jan-Baptist Vinkstraat 2, 3070, Belgium

GEA006-2

General Power Tool Safety

Warnings

WARNING Read all safety warnings and all

instructions. Failure to follow the warnings and

instructions may result in electric shock, fire and/or

serious injury.

Save all warnings and

instructions for future reference.

The term "power tool" in the warnings refers to your

mains-operated (corded) power tool or battery-operated

(cordless) power tool.

Work area safety

1. Keep work area clean and well lit. Cluttered or

dark areas invite accidents.

2. Do not operate power tools in explosive

atmospheres, such as in the presence of

flammable liquids, gases or dust. Power tools

create sparks which may ignite the dust or fumes.

3. Keep children and bystanders away while

operating a power tool. Distractions can cause

you to lose control.

Electrical safety

4. Power tool plugs must match the outlet. Never

modify the plug in any way. Do not use any

adapter plugs with earthed (grounded) power

tools. Unmodified plugs and matching outlets will

reduce risk of electric shock.

5. Avoid body contact with earthed or grounded

surfaces such as pipes, radiators, ranges and

refrigerators. There is an increased risk of

electric shock if your body is earthed or grounded.

6. Do not expose power tools to rain or wet

conditions. Water entering a power tool will

increase the risk of electric shock.

7. Do not abuse the cord. Never use the cord for

carrying, pulling or unplugging the power tool.

Keep cord away from heat, oil, sharp edges or

moving parts. Damaged or entangled cords

increase the risk of electric shock.

8. When operating a power tool outdoors, use an

extension cord suitable for outdoor use. Use of

a cord suitable for outdoor use reduces the risk of

electric shock.

9. If operating a power tool in a damp location is

unavoidable, use a ground fault circuit

interrupter (GFCI) protected supply. Use of an

GFCI reduces the risk of electric shock.

Personal safety

10. Stay alert, watch what you are doing and use

common sense when operating a power tool.

Do not use a power tool while you are tired or

under the influence of drugs, alcohol or

medication. A moment of inattention while

operating power tools may result in serious

personal injury.

11. Use personal protective equipment. Always

wear eye protection. Protective equipment such

as dust mask, non-skid safety shoes, hard hat, or

hearing protection used for appropriate conditions

Product specificaties

Merk:	Makita
Categorie:	Boormachine
Model:	DHR243RMJ
Gewicht:	3400 g
Breedte:	85 mm
Diepte:	353 mm
Hoogte:	213 mm
Stroombron:	Batterij/Accu
Accu/Batterij voltage:	18 V
Boor diameter in staal (max):	13 mm
Boor diameter in beton (max):	24 mm
Boor diameter in hout (max):	27 mm
Opbergetui:	Ja
Vibratie emissie:	1.5 m/s²
Aantal slagen:	4700 bpm
Aanslag-energie:	2 J
Nominale snelheid:	950 RPM
Batterijtechnologie:	Lithium-Ion (Li-Ion)
SDS systeem:	Ja