Makita DHP456RMWX Handleiding

Makita Boormachine DHP456RMWX

Lees hieronder de 📖 handleiding in het Nederlandse voor Makita DHP456RMWX (12 pagina's) in de categorie Boormachine. Deze handleiding was nuttig voor 25 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/12

ENGLISH (Original instructions)

INSTRUCTION MANUAL

IMPORTANT: Read Before Using.

Cordless Hammer Driver Drill

DHP446

DHP456

011491

ENGLISH (Original instructions)

SPECIFICATIONS

Model DHP446 DHP456

Concrete 13 mm

Steel 13 mm

Wood 38 mm

Wood screw 6 mm x 75 mm 10 mm x 89 mm

Capacities

Machine screw M6

High (2) 0 - 1,500

No load speed (min-1) Low (1) 0 - 400

High (2) 0 - 22,500

Blows per minute Low (1) 0 - 6,000

Overall length 206 mm

Net weight 1.4 kg 1.7 kg 1.6 kg 1.8 kg

Standard battery cartridge BL1415N BL1430/

BL1440

BL1815/BL1815N/

BL1820

BL1830/BL1840/

BL1850

Rated voltage D.C. 14.4 V D.C. 18 V

• Due to our continuing program of research and development, the specifications herein are subject to change without notice.

• Specifications and battery cartridge may differ from country to country.

• Weight, with battery cartridge, according to EPTA-Procedure 01/2003

END004-6

Symbols

The following show the symbols used for the equipment.

Be sure that you understand their meaning before use.

･ Read instruction manual.

･ Only for EU countries

Do not dispose of electric equipment or

battery pack together with household

waste material!

In observance of the European

Directives, on Waste Electric and

Electronic Equipment and Batteries and

Accumulators and Waste Batteries and

Accumulators and their implementation

in accordance with national laws,

electric equipment and batteries and

battery pack(s) that have reached the

end of their life must be collected

separately and returned to an

environmentally compatible recycling

facility.

ENE039-1

Intended use

The tool is intended for impact drilling in brick, concrete

and stone as well as for drilling without impact in wood,

metal, ceramic and plastic.

ENG905-1

Noise

The typical A-weighted noise level determined according

to EN60745:

Model DHP446

Sound pressure level (L

pA) : 80 dB (A)

Uncertainty (K) : 3 dB (A)

The noise level under working may exceed 80 dB (A).

Model DHP456

Sound pressure level (L

pA) : 81 dB (A)

Sound power level (L

WA) : 92 dB (A)

Uncertainty (K) : 3 dB (A)

Wear ear protection

ENG900-1

Vibration

The vibration total value (tri-axial vector sum) determined

according to EN60745:

Model DHP446

Work mode: impact drilling into concrete

Vibration emission (ah,ID

) : 6.5 m/s2

Uncertainty (K) : 1.5 m/s2

Work mode: drilling into metal

Vibration emission (ah,D) : 2.5 m/s

2 or less

Uncertainty (K) : 1.5 m/s2

Ni-MH

Li-ion

Model DHP456

Work mode: impact drilling into concrete

Vibration emission (ah,ID) : 8.0 m/s2

Uncertainty (K) : 1.5 m/s2

Work mode: drilling into metal

Vibration emission (ah,D) : 2.5 m/s2 or less

Uncertainty (K) : 1.5 m/s2

ENG901-1

• The declared vibration emission value has been

measured in accordance with the standard test

method and may be used for comparing one tool

with another.

• The declared vibration emission value may also be

used in a preliminary assessment of exposure.

WARNING:

• The vibration emission during actual use of the

power tool can differ from the declared emission

value depending on the ways in which the tool is

used.

• Be sure to identify safety measures to protect the

operator that are based on an estimation of

exposure in the actual conditions of use (taking

account of all parts of the operating cycle such as

the times when the tool is switched off and when it

is running idle in addition to the trigger time).

ENH101-17

For European countries only

EC Declaration of Conformity

Makita declares that the following Machine(s):

Designation of Machine:

Cordless Hammer Driver Drill

Model No./ Type: DHP446, DHP456

Conforms to the following European Directives:

2006/42/EC

They are manufactured in accordance with the following

standard or standardized documents:

EN60745

The technical file in accordance with 2006/42/EC is

available from:

Makita, Jan-Baptist Vinkstraat 2, 3070, Belgium

31.12.2013

000331

Yasushi Fukaya

Director

Makita, Jan-Baptist Vinkstraat 2, 3070, Belgium

GEA006-2

General Power Tool Safety

Warnings

WARNING Read all safety warnings and all

instructions. Failure to follow the warnings and

instructions may result in electric shock, fire and/or

serious injury.

Save all warnings and

instructions for future reference.

The term "power tool" in the warnings refers to your

mains-operated (corded) power tool or battery-operated

(cordless) power tool.

Work area safety

1. Keep work area clean and well lit. Cluttered or

dark areas invite accidents.

2. Do not operate power tools in explosive

atmospheres, such as in the presence of

flammable liquids, gases or dust. Power tools

create sparks which may ignite the dust or fumes.

3. Keep children and bystanders away while

operating a power tool. Distractions can cause

you to lose control.

Electrical safety

4. Power tool plugs must match the outlet. Never

modify the plug in any way. Do not use any

adapter plugs with earthed (grounded) power

tools. Unmodified plugs and matching outlets will

reduce risk of electric shock.

5. Avoid body contact with earthed or grounded

surfaces such as pipes, radiators, ranges and

refrigerators. There is an increased risk of

electric shock if your body is earthed or grounded.

6. Do not expose power tools to rain or wet

conditions. Water entering a power tool will

increase the risk of electric shock.

7. Do not abuse the cord. Never use the cord for

carrying, pulling or unplugging the power tool.

Keep cord away from heat, oil, sharp edges or

moving parts. Damaged or entangled cords

increase the risk of electric shock.

8. When operating a power tool outdoors, use an

extension cord suitable for outdoor use. Use of

a cord suitable for outdoor use reduces the risk of

electric shock.

9. If operating a power tool in a damp location is

unavoidable, use a ground fault circuit

interrupter (GFCI) protected supply. Use of an

GFCI reduces the risk of electric shock.

Product specificaties

Merk:	Makita
Categorie:	Boormachine
Model:	DHP456RMWX
Kleur van het product:	Black,White
Gewicht:	1800 g
Stroombron:	Batterij/Accu
Oplaadtijd:	36 min
Accu/Batterij voltage:	18 V
Inactieve snelheid (1ste versnelling):	400 RPM
Inactieve snelheid (2e versnelling):	1500 RPM
Boor diameter in staal (max):	13 mm
Boor diameter in beton (max):	13 mm
Boor diameter in hout (max):	38 mm
Aantal versnellingen:	2
Reverse:	Ja
Ingebouwd licht:	Ja
Boren:	Ja
Schroeven:	Ja
Draaistanden:	16
Maximale koppel (zachte applicaties):	36 Nm
Maximale koppel (harde applicaties):	50 Nm
Inclusief acculader:	Ja
Batterij capaciteit:	4 Ah
Vibratie emissie:	1.5 m/s²
Aantal inbegrepen batterijen:	1 stuk(s)
Schroevendraaier bit:	Ja
Productontwerp:	Boormachine met pistoolgreep
Batterijtechnologie:	Lithium-Ion (Li-Ion)