Makita DDF484RM3J Handleiding

Makita Boormachine DDF484RM3J

Lees hieronder de 📖 handleiding in het Nederlandse voor Makita DDF484RM3J (12 pagina's) in de categorie Boormachine. Deze handleiding was nuttig voor 74 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/12

INSTRUCTION MANUAL

Cordless Driver Drill

DDF484

ENGLISH: Original instructions

Read before use.

2 ENGLISH

SPECIFICATIONS

Model: DDF484

Drilling capacities 13 mmSteel

Wood 38 mm

Fastening capacities Wood screw 10 mm x 90 mm

Machine screw M6

No load speed High (2) 0 - 2,000 min-1

Low (1) 0 - 500 min-1

Overall length 172 mm

Rated voltage D.C. 18 V

Battery cartridge BL1815N, BL1820, BL1820B BL1830, BL1840, BL1850,

BL1830B, BL1840B, BL1850B,

BL1860B

Net weight 1.5 kg 1.8 kg

• Due to our continuing program of research and development, the specications herein are subject to change

without notice.

• Specications and battery cartridge may differ  from country to country.

• Weight,with battery cartridge, according toEPTA-Procedure01/2003

Symbols

The following show the symbols used for the equip-

ment. Be sure that you understand their meaning before

use.

Read instruction manual.

Ni-MH

Li-ion

Only for EUcountries

Do not dispose of electric  equipment or 

battery pack together with household waste

material!

In observance of  the European Directives,

on and  Waste Electric Electronic

Equipment and Batteries and Accumulators

and and  Waste Batteries Accumulators

and their implementation in accordance

with national laws, electric equipment and 

batteries and battery pack(s) that have

reached the end of their life must be col-

lected separately and returned to an envi-

ronmentally compatible recycling facility.

Intended use

The tool is intended for drilling and screw driving in 

wood, metal and plastic.

Noise

The typical A-weighted noise level determined accord-

ing to EN60745:

Sound pressure level (L

pA): 76 dB(A)

Uncertainty (K) :3dB(A)

The noise level under working may exceed 80 dB (A).

WARNING: Wear ear protection.

Vibration

The vibration total value (tri-axial vector sum) deter -

mined according toEN60745:

Work mode: drilling into metal

Vibration emission (a

h,D): 2.5 m/s2 or less

Uncertainty (K) : 1.5 m/s

NOTE:The declared vibration emission value has 

been measured in accordance with the standard test

method and may be used for comparing one tool with

another.

NOTE:The declared vibration emission value

may also be used in a preliminary assessment of

exposure.

WARNING: The vibration emission during actual 

use of the power tool can differ from the declared

emission value depending on the ways in which the

tool is used.

WARNING: Be sure to identify safety measures

to protect the operator that are based on an estima-

tion of exposure in the actual conditions of use (taking

account of all parts of the operating cycle such as

the times when the tool is switched off and when it is

running idle in addition to the trigger time).

EC Declaration of Conformity

For European countries only

The EC declaration of conformity is included as AnnexA

to this instruction manual.

3 ENGLISH

SAFETY WARNINGS

General power tool safety warnings

WARNING: Read all safety warnings and

all instructions. Failure to follow the warnings and

instructions may result in electricshock, re and/or

serious injury.

Save all warnings and instruc-

tions for future reference.

The term "power tool" in the warningsrefers to your

mains-operated (corded) power tool or battery-operated

(cordless) power tool.

Work area safety

1. Keep work area clean and well lit. Cluttered or

dark areas invite accidents.

2. Do not operate power tools in explosive atmo-

spheres, such as in the presence of ammable

liquids, gases or dust. Power tools create sparks

which may ignite the dust or fumes.

3. Keep children and bystanders away while

operating a power tool. Distractions can cause

you to lose control.

Electrical Safety

1. Power tool plugs must match the outlet. Never

modify the plug in any way. Do not use any

adapter plugs with earthed (grounded) power

tools. Unmodiedplugsand matching outlets will 

reduce risk of electric shock.

2. Avoid body contact with earthed or grounded

surfaces such as pipes, radiators, ranges and

refrigerators.There is an increased riskof elec -

tric shock if your body is earthed or grounded.

3. Do not expose power tools to rain or wet con-

ditions. Water entering a power tool will increase

the risk of electric shock.

4. Do not abuse the cord. Never use the cord for

carrying, pulling or unplugging the power tool.

Keep cord away from heat, oil, sharp edges

or moving parts. Damaged or entangled cords

increase the risk of electric shock.

When operating a power tool outdoors, use an

extension cord suitable for outdoor use. Use ofacord

suitable for outdoor use reduces the risk of electric shock.

6. If operating a power tool in a damp location

is unavoidable, use a residual current device

(RCD) protected supply.  Use of an RCD reduces

the risk of electric shock.

Personal Safety

1. Stay alert, watch what you are doing and use

common sense when operating a power tool.

Do not use a power tool while you are tired or

under the inuence of drugs, alcohol or med-

ication.A  moment of inattention while operating  

power tools may result in  serious personal injury.

2. Use personal protective equipment. Always

wear eye protection.  Protective equipment such

as dust mask, non-skid safety shoes, hard hat, or

hearing protection used for appropriate conditions

will reduce personal injuries.

3. Prevent unintentional starting. Ensure the

switch is in the off-position before connecting

to power source and/or battery pack, picking

up or carrying the tool. Carrying power tools with

your nger on switch the or energising power tools

that have the switch on invites accidents.

4. Remove any adjusting key or wrench before

turning the power tool on.Awrench or key a left

attached to a rotating part of the power tool may

result in personal injury.

5. Do not overreach. Keep proper footing and

balance at all times.Thisenables better control  

of the power tool in unexpected situations.

6. Dress properly. Do not wear loose clothing or

jewellery. Keep your hair, clothing, and gloves

away from moving parts.Loose clothes, jewel-

lery or long hair can be caught in moving parts.

7. If devices are provided for the connection of

dust extraction and collection facilities, ensure

these are connected and properly used. Use of

dust collection can reduce dust-related hazards.

Power tool use and care

1. Do not force the power tool. Use the correct

power tool for your application.The correct

power tool will do  the job better and safer at  the

rate for which it was designed.

2. Do not use the power tool if the switch does

not turn it on and off.Any  power tool that cannot

be controlled with the switch is dangerous and

must be repaired.

3. Disconnect the plug from the power source

and/or the battery pack from the power tool

before making any adjustments, changing

accessories, or storing power tools. Such pre-

ventive safety measures reduce the risk of starting

the power tool accidentally.

4. Store idle power tools out of the reach of chil-

dren and do not allow persons unfamiliar with

the power tool or these instructions to operate

the power tool.  Power tools are dangerous in  the

hands of untrained users.

5. Maintain power tools. Check for misalignment

or binding of moving parts, breakage of parts

and any other condition that may affect the

power tool’s operation. If damaged, have the

power tool repaired before use. Many accidents

are caused by poorly maintained power tools.

6. Keep cutting tools sharp and clean. Properly

maintained cutting tools with sharp cutting edges

are less likely to bind and are easier to control.

7. Use the power tool, accessories and tool bits

etc. in accordance with these instructions, tak-

ing into account the working conditions and

the work to be performed. Use of power the tool

for operations different from those intended could

result in a hazardous situation.

Battery tool use and care

1. Recharge only with the charger specied by

the manufacturer.A  charger that is suitable  for

one type of battery pack  may create arisk of re  

when used with another battery pack.

2. Use power tools only with specically desig-

nated battery packs.  Use of any other battery  

packs may create riska of injury and re.

Product specificaties

Merk:	Makita
Categorie:	Boormachine
Model:	DDF484RM3J
Kleur van het product:	Black, Blue, Metallic
Gewicht:	1800 g
Breedte:	78 mm
Diepte:	172 mm
Hoogte:	261 mm
Stroombron:	Batterij/Accu
Accu/Batterij voltage:	18 V
Inactieve snelheid (1ste versnelling):	500 RPM
Inactieve snelheid (2e versnelling):	2000 RPM
Stationair toerental (max):	2000 RPM
Maximum koppel:	54 Nm
Boor diameter in staal (max):	13 mm
Boor diameter in beton (max):	- mm
Boor diameter in hout (max):	38 mm
Geluidsdrukniveau:	88 dB
Aantal versnellingen:	2
Onzekerheid K:	2.5 m/s²
Ingebouwd licht:	Ja
Boren:	Ja
Schroeven:	Ja
Maximale koppel (zachte applicaties):	30 Nm
Spanklauw breedte (min):	1.5 mm
Spanklauw breedte (max):	13 mm
Maximale koppel (harde applicaties):	54 Nm
Inclusief acculader:	Ja
Inclusief batterij:	Ja
Geluidsniveau onzekerheid:	3 dB
Aantal inbegrepen batterijen:	3 stuk(s)
Productontwerp:	Boormachine met pistoolgreep
Geluidsvermogensniveau:	99 dB