Makita CE001G Handleiding


Lees hieronder de ๐Ÿ“– handleiding in het Nederlandse voor Makita CE001G (20 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 90 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/20
INSTRUCTION MANUAL
Cordless Power Cutter
CE001G
ENGLISH: Original instructions
Read before use.
2 ENGLISH
SPECIFICATIONS
Model: CE001G
Wheel diameter 355 mm
Max. wheel thickness 5.0 mm
Max. cutting depth 127 mm
Rated speed 5,300 min-1
Rated voltage D.C. 72 V - 80 V max
Max. permitted pressure of feed-water 5.0 bars
Overall length 786 mm
Net weight 12.3 - 12.9 kg
Protection degree IPX4
โ€ข๎˜ƒ Due๎˜ƒto๎˜ƒour๎˜ƒcontinuing๎˜ƒprogram๎˜ƒof๎˜ƒresearch๎˜ƒand๎˜ƒdevelopment,๎˜ƒthe๎˜ƒspeci๎šฟcations๎˜ƒherein๎˜ƒare๎˜ƒsubject๎˜ƒto๎˜ƒchange๎˜ƒ
without notice.
โ€ข๎˜ƒ Speci๎šฟcations๎˜ƒmay๎˜ƒdi๓ฐ€จer๎˜ƒfrom๎˜ƒcountry๎˜ƒto๎˜ƒcountry.
โ€ข๎˜ƒ The๎˜ƒweight๎˜ƒmay๎˜ƒdi๓ฐ€จer๎˜ƒdepending๎˜ƒon๎˜ƒthe๎˜ƒattachment(s),๎˜ƒincluding๎˜ƒthe๎˜ƒbattery๎˜ƒcartridge.๎˜ƒThe๎˜ƒlightest๎˜ƒand๎˜ƒheavi-
est combination, according to EPTA-Procedure 01/2014, are shown in the table.
Applicable battery cartridge and charger
Battery๎˜ƒcartridge BL4040 / BL4050F*
*๎˜ƒ:๎˜ƒRecommended๎˜ƒbattery
Charger DC40RA / DC40RB / DC40RC
โ€ข๎˜ƒ Some๎˜ƒof๎˜ƒthe๎˜ƒbattery๎˜ƒcartridges๎˜ƒand๎˜ƒchargers๎˜ƒlisted๎˜ƒabove๎˜ƒmay๎˜ƒnot๎˜ƒbe๎˜ƒavailable๎˜ƒdepending๎˜ƒon๎˜ƒyour๎˜ƒregion๎˜ƒof๎˜ƒ
residence.
WARNING: Only use the battery cartridges and chargers listed above.๎˜ƒUse๎˜ƒof๎˜ƒany๎˜ƒother๎˜ƒbattery๎˜ƒcartridges๎˜ƒ
and๎˜ƒchargers๎˜ƒmay๎˜ƒcause๎˜ƒinjury๎˜ƒand/or๎˜ƒ๎šฟre.
Symbols
The๎˜ƒfollowings๎˜ƒshow๎˜ƒthe๎˜ƒsymbols๎˜ƒwhich๎˜ƒmay๎˜ƒbe๎˜ƒused๎˜ƒ
for๎˜ƒthe๎˜ƒequipment.๎˜ƒBe๎˜ƒsure๎˜ƒthat๎˜ƒyou๎˜ƒunderstand๎˜ƒtheir๎˜ƒ
meaning before use.
Read instruction manual.
Wear๎˜ƒsafety๎˜ƒglasses.
Ni-MH
Li-ion
Only๎˜ƒfor๎˜ƒEU๎˜ƒcountries
Due to the presence of hazardous com-
ponents in the equipment, waste electrical
and electronic equipment, accumulators
and๎˜ƒbatteries๎˜ƒmay๎˜ƒhave๎˜ƒa๎˜ƒnegative๎˜ƒimpact๎˜ƒ
on the environment and human health.
Do not dispose of electrical and electronic
appliances or batteries with household waste!
In accordance with the European Directive
on waste electrical and electronic equipment
and on accumulators and batteries and waste
accumulators and batteries, as well as their
adaptation to national law, waste electrical
equipment, batteries and accumulators
should๎˜ƒbe๎˜ƒstored๎˜ƒseparately๎˜ƒand๎˜ƒdelivered๎˜ƒ
to a separate collection point for municipal
waste, operating in accordance with the
regulations on environmental protection.
This๎˜ƒis๎˜ƒindicated๎˜ƒby๎˜ƒthe๎˜ƒsymbol๎˜ƒof๎˜ƒthe๎˜ƒ
crossed-out wheeled bin placed on the
equipment.
Intended use
The tool is intended for cutting in metal materials with
an๎˜ƒabrasive๎˜ƒcut-o๓ฐ€จ๎˜ƒwheel๎˜ƒand๎˜ƒalso๎˜ƒmasonry๎˜ƒmaterials๎˜ƒ
with a diamond wheel.
3 ENGLISH
Noise
The๎˜ƒtypical๎˜ƒA-weighted๎˜ƒnoise๎˜ƒlevel๎˜ƒdetermined๎˜ƒaccording๎˜ƒto๎˜ƒEN60745-2-22:
Sound๎˜ƒpressure๎˜ƒlevel๎˜ƒ(L
pA)๎˜ƒ:๎˜ƒ109๎˜ƒdB(A)
Sound๎˜ƒpower๎˜ƒlevel๎˜ƒ(L
WA)๎˜ƒ:๎˜ƒ120๎˜ƒdB๎˜ƒ(A)
Uncertainty๎˜ƒ(K)๎˜ƒ:๎˜ƒ3๎˜ƒdB(A)
NOTE:๎˜ƒThe๎˜ƒdeclared๎˜ƒnoise๎˜ƒemission๎˜ƒvalue(s)๎˜ƒhas๎˜ƒbeen๎˜ƒmeasured๎˜ƒin๎˜ƒaccordance๎˜ƒwith๎˜ƒa๎˜ƒstandard๎˜ƒtest๎˜ƒmethod๎˜ƒand๎˜ƒ
may๎˜ƒbe๎˜ƒused๎˜ƒfor๎˜ƒcomparing๎˜ƒone๎˜ƒtool๎˜ƒwith๎˜ƒanother.
NOTE:๎˜ƒThe๎˜ƒdeclared๎˜ƒnoise๎˜ƒemission๎˜ƒvalue(s)๎˜ƒmay๎˜ƒalso๎˜ƒbe๎˜ƒused๎˜ƒin๎˜ƒa๎˜ƒpreliminary๎˜ƒassessment๎˜ƒof๎˜ƒexposure.
WARNING: Wear ear protection.
WARNING: The noise emission during actual use of the power tool can di๓ฐ€จer from the declared val-
ue(s) depending on the ways in which the tool is used especially what kind of workpiece is processed.
WARNING: Be sure to identify safety measures to protect the operator that are based on an estimation
of exposure in the actual conditions of use (taking account of all parts of the operating cycle such as the
times when the tool is switched o๓ฐ€จ and when it is running idle in addition to the trigger time).
Vibration
Work mode: concrete cutting
Left hand Right hand Applicable standard
ah,W (m/s2) Uncertainty K (m/s2) ah,W (m/s2) Uncertainty K (m/s2)
2.5 1.5 2.5 1.5 EN60745-2-22
NOTE:๎˜ƒThe๎˜ƒdeclared๎˜ƒvibration๎˜ƒtotal๎˜ƒvalue(s)๎˜ƒhas๎˜ƒbeen๎˜ƒmeasured๎˜ƒin๎˜ƒaccordance๎˜ƒwith๎˜ƒa๎˜ƒstandard๎˜ƒtest๎˜ƒmethod๎˜ƒand๎˜ƒ
may๎˜ƒbe๎˜ƒused๎˜ƒfor๎˜ƒcomparing๎˜ƒone๎˜ƒtool๎˜ƒwith๎˜ƒanother.
NOTE:๎˜ƒThe๎˜ƒdeclared๎˜ƒvibration๎˜ƒtotal๎˜ƒvalue(s)๎˜ƒmay๎˜ƒalso๎˜ƒbe๎˜ƒused๎˜ƒin๎˜ƒa๎˜ƒpreliminary๎˜ƒassessment๎˜ƒof๎˜ƒexposure.
WARNING: The vibration emission during actual use of the power tool can di๓ฐ€จer from the declared
value(s) depending on the ways in which the tool is used especially what kind of workpiece is processed.
WARNING: Be sure to identify safety measures to protect the operator that are based on an estimation
of exposure in the actual conditions of use (taking account of all parts of the operating cycle such as the
times when the tool is switched o๓ฐ€จ and when it is running idle in addition to the trigger time).
EC Declaration of Conformity
For European countries only
The๎˜ƒEC๎˜ƒdeclaration๎˜ƒof๎˜ƒconformity๎˜ƒis๎˜ƒincluded๎˜ƒas๎˜ƒAnnex๎˜ƒA๎˜ƒ
to this instruction manual.
SAFETY WARNINGS
General power tool safety warnings
WARNING: Read all safety warnings, instruc-
tions, illustrations and speci๎šฟcations provided
with this power tool. Failure to follow all instructions
listed๎˜ƒbelow๎˜ƒmay๎˜ƒresult๎˜ƒin๎˜ƒelectric๎˜ƒshock,๎˜ƒ๎šฟre๎˜ƒand/or๎˜ƒ
serious๎˜ƒinjury.
Save all warnings and instruc-
tions for future reference.
The๎˜ƒterm๎˜ƒ"power๎˜ƒtool"๎˜ƒin๎˜ƒthe๎˜ƒwarnings๎˜ƒrefers๎˜ƒto๎˜ƒyour๎˜ƒ
mains-operated๎˜ƒ(corded)๎˜ƒpower๎˜ƒtool๎˜ƒor๎˜ƒbattery-operated๎˜ƒ
(cordless)๎˜ƒpower๎˜ƒtool.
Work area safety
1. Keep work area clean and well lit. Cluttered or
dark areas invite accidents.
2. Do not operate power tools in explosive atmo-
spheres, such as in the presence of ๎›€ammable
liquids, gases or dust. Power tools create sparks
which๎˜ƒmay๎˜ƒignite๎˜ƒthe๎˜ƒdust๎˜ƒor๎˜ƒfumes.
3. Keep children and bystanders away while
operating a power tool. Distractions can cause
you๎˜ƒto๎˜ƒlose๎˜ƒcontrol.
Electrical safety
1.
Power tool plugs must match the outlet. Never modify
the plug in any way. Do not use any adapter plugs with
earthed (grounded) power tools. Unmodi๎šฟed๎˜ƒplugs๎˜ƒand๎˜ƒ
matching outlets will reduce risk of electric shock.
2. Avoid body contact with earthed or grounded
surfaces, such as pipes, radiators, ranges and
refrigerators. There is an increased risk of elec-
tric๎˜ƒshock๎˜ƒif๎˜ƒyour๎˜ƒbody๎˜ƒis๎˜ƒearthed๎˜ƒor๎˜ƒgrounded.
3. Do not expose power tools to rain or wet con-
ditions. Water entering a power tool will increase
the risk of electric shock.
4. Do not abuse the cord. Never use the cord for
carrying, pulling or unplugging the power tool.
Keep cord away from heat, oil, sharp edges
or moving parts. Damaged or entangled cords
increase the risk of electric shock.


Product specificaties

Merk: Makita
Categorie: Niet gecategoriseerd
Model: CE001G

Heb je hulp nodig?

Als je hulp nodig hebt met Makita CE001G stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Niet gecategoriseerd Makita

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd