Makita BO3711X Handleiding

Makita Schuurmachine BO3711X

Lees hieronder de 📖 handleiding in het Nederlandse voor Makita BO3711X (7 pagina's) in de categorie Schuurmachine. Deze handleiding was nuttig voor 34 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/7

PRODUCT

P 1/ 7

Model No.

Description

Specification

Standard equipment

Note: The standard equipment for the tool shown above may vary by country.

BO3710, BO3711

Finishing Sander

Models BO3710 and BO3711 have been developed as

the successor models of BO3700.

Additionally to the same lightweight design as BO3700,

BO3710 and BO3711 feature the following conveniences:

Lower total height from the base to the top of the grip

for easier handling and higher maneuverability

Ergonomic tool body for sure grip and easy handling

whether in single- or double-handed operation

Easy-to-operate paper clamp with rolled clamper’s edges

The specification difference between BO3710 and BO3711 is;

BO3710: Single speed model

BO3711: Variable speed model

Abrasive paper 93-120 .............. 1

Punch plate ................................ 1

Dust bag or Dust box ................ 1

Model No. BO3710 BO3711

Optional accessories

Abrasive papers 93-60, 93-80, 93-120, 93-180, 93-240 (Clamp type)

Abrasive papers 93-60, 93-80, 93-120, 93-180, 93-240 (Hook & loop type)

Punch plate

Hose complete 28-1.5

Pad complete (Clamp type)

Pad complete (Hook & loop type)

Filter set (including 5 non-woven cloth filters)

Dimensions: mm (")

Width (W)

Height (H)

Length (L) 253 (10)

92 (3-5/8)

154 (6-1/16)

Continuous Rating (W)

Voltage (V) Cycle (Hz) Input Output

Max. Output (W)

110

120

220

230

240

1.8

1.7

0.95

0.85

50/60

190

---

190

Current (A)

*1 Optional pad complete (Hook & loop type) is required.

*2 Weight according to EPTA-Procedure 01/2003

Specification

Pad size: mm (") 93 x 185 (3-5/8 x 7-1/4)

Double insulation

Net weight : kg (lbs)*2

Power supply cord: m (ft)

Abrasive paper size: mm (") 93 x 228 (3-5/8 x 9)

Yes

2.0 (6.6)

1.6 (3.5) 1.6 (3.5)

Orbits per minute: min. = opm 11,000-1

Strokes per minute: min. = spm 22,000-1

4,000 - 11,000

8,000 - 22,000

Variable speed control by dial No Yes

Paper fastening system Hook & loop

Clamp

Yes*1

TECHNICAL INFORMATION

CONCEPT AND MAIN APPLICATIONS

2 7P /

Repair

CAUTION: Repair the machine in accordance with “Instruction manual” or “Safety instructions”.

[1] NECESSARY REPAIRING TOOLS

[2] LUBRICATIONS

[3] DISASSEMBLY/ASSEMBLY

[3]-1. Armature

Fig. 2

Fig. 1

Code No. Description Use for

1R027 Bearing setting pipe 18-10.2 Removing Armature

1R029 Bearing setting pipe 23-15.2 Removing Balancer from Base

1R269 Bearing extractor Removing Ball bearings from Armature

1R286 Round bar for Arbor 12-50 Removing Ball bearing 6202DDW from Balancer

1R350 Ring 60 Holding Base when removing Balancer and Ball bearing 6202DDW

1R258 V block Holding Ball bearing 6202DDW when removing Balancer

No lubrication is required.

4x18 Tapping screw

(5pcs.)

1) Remove Top cover by unscrewing five 4x18 Tapping screws.

Then remove Brush holders with Carbon brushes and Lead wires.

Switch, Noise suppressor and Power supply cord can be replaced.

( )Fig. 1

2) Remove Pad complete by unscrewing four M4x10 Pan head screws.

O ring 53 may be attached to Pad complete. Do not lose O ring 53.

( )Fig. 2

3) Insert Slotted screwdriver between a rib of Base and Balancer to

stop moving of Balancer and remove M5x16 Countersunk head

screw. ( ) Fig. 3

4) Remove Base together with Balancer and Ball bearing 6202DDW.

( )Fig. 4

5) Remove Fan guide, Flat washer 8 and Fan 68 by unscrewing two

4x18 Tapping screws. ( )Fig. 5

6) After removing four 4x18 Tapping screws, tap Motor housing with

Plastic hammer as illustrated in . Armature can be removed Fig. 6

together with Bearing box.

M4x10 Pan head

screw (4pcs.)

Top cover

Brush

holders

Pad

complete

O ring 53

Base

Fig. 5 Fig. 6

Fig. 3 Fig. 4

DISASSEMBLING

Slotted screwdriver

Phillips screwdriver

Balancer

Rib of Base

Ball bearing 6202DDW

Balancer

M5x16 Countersunk

head screw

4x18 Tapping screw

(2pcs.)

4x18 Tapping screw

(4pcs.)

Base

Fan guide

Fan 68

Flat washer 8

Armature

Motor housing

Bearing box

[3] DISASSEMBLY/ASSEMBLY

[3]-1. Armature (cont.)

DISASSEMBLING

P / 3 7

Repair

Fig. 7A Fig. 7B

Fig. 8 Fig. 9

7) Armature can be removed from Bearing box by tapping the shaft with plastic hammer. (Fig. 7A)

Note: When it is difficult to remove Armature in the above manner, put 1R027 on Ball bearing 6200DDW and press

down 1R027 as illustrated in Fig. 7B.

8) Apply 1R269 to the clearance between Insulation washer and Ball bearing 607ZZ, and set the legs of 1R269 to Arbor

press to prevent the jaws of 1R269 from being slipped off. Ball bearing 607ZZ can be removed with vise and 1R269.

( )Fig. 8

9) Install M5x16 Countersunk head screw temporarily to the Armature shaft, and then remove Ball bearing 6200DDW

without damage to the thread of Armature shaft. ( Flat washer 10 can be removed.Fig. 9)

1R027

Ball bearing 607ZZ

Ball bearing

6200DDW

Insulation

washer

Flat washer 10

1R269

M5x16 Countersunk head screw

Ball bearing 6200DDW

Ball bearing

6200DDW

Flat washer 10

protrusion

Ball bearing

6200DDW

Take the disassembling step in reverse.

Note: 1) Do not fail to set Flat washer 10 on the drive end of Armature shaft before pressfit Ball bearing 6200DDW in place.

(Figs. ) Face the protrusion of Flat washer 10 to Ball bearing 6200DDW.Figs. 9 and 8

2) Be sure to install O ring 53 into Base. ( )Fig. 2

3) Flat washer 8 has to be put between Ball bearing 6202DDW and Fan 68. ( )Fig. 4

ASSEMBLING

Product specificaties

Merk:	Makita
Categorie:	Schuurmachine
Model:	BO3711X
Kleur van het product:	Black,Turquoise
Gewicht:	1600 g
Breedte:	92 mm
Diepte:	253 mm
Hoogte:	154 mm
Snoerlengte:	2 m
Stroombron:	AC
Vermogen:	190 W
Stofzuigercontainer type:	Stofzak
Stationair toerental (max):	11000 RPM
Geluidsdrukniveau:	72 dB
Onzekerheid K:	1.5 m/s²
Aanpasbare snelheid:	Ja
Stationair toerental (min):	4000 RPM
Geluidsniveau onzekerheid:	3 dB
Stationair aantal schuurbewegingen (min):	8000 OPM
Stationair aantal schuurbewegingen (max):	22000 OPM
Vibratie emissie:	3.5 m/s²
Bevestiging schuurmateriaal:	Klem/klittenband
Type schuurmachine:	Schuurmachine
Stofafzuigingspoort:	Ja
Excentriciteit:	1 mm
Oscillerende baan diameter:	2 mm
AC-ingangsspanning:	230 V
Schuuroppervlakte grootte (BxD):	93 x 185 mm
Schuurbladen (klem):	93 x 228 mm
Schuurbladen (klittenband):	93 x 185 mm