Makita 9741 Handleiding

Makita Schuurmachine 9741

Lees hieronder de 📖 handleiding in het Nederlandse voor Makita 9741 (32 pagina's) in de categorie Schuurmachine. Deze handleiding was nuttig voor 29 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/32

Wheel Sander Instruction Manual

Décapeur à brosse Manuel d’instructions

Bürstenschleifer Betriebsanleitung

Sverniciatore a spazzole Istruzioni per l’uso

Strip schuurmachine Gebruiksaanwijzing

Lijadora de cepillo Manual de instrucciones

Lixadeira de escovas Manual de instruções

Børstesliber Brugsanvisning

Λειαντής τροχού

Οδηγίες χρήσεως

9741

1 2

3 4

5 6

7 8

3 4

14 15

17 18

004566 004567

004568 004569

004570 004571

001145 004572

ENGLISH (Original instructions)

Explanation of general view

1 Wing nut

2 Front roller

3 Switch trigger

4 Lock button

5 Spindle

6 Wheel

7 Output shaft

8 Hex wrench

9 Notch

10 Pin

11 Dust port

12 Cover plate

13 Joint

14 Grip

15 Handle

16 Limit mark

17 Screwdriver

18 Brush holder cap

SPECIFICATIONS

Model 9741

Wheel size (Diameter x Width) ................. 100 x 120 mm

No load speed (min–1) ............................................ 3,500

Dimensions (L x W x H) .................. 310 x 185 x 182 mm

Net weight .............................................................. 4.2 kg

Safety class ....................................................... /II

• Due to our continuing program of research and devel-

opment, the specifications herein are subject to change

without notice.

• Specifications may differ from country to country.

• Weight according to EPTA-Procedure 01/2014

ENE053-1

Intended use

The tool is intended for removing paint with slit paper

wheel and fine metal cleaning with wire brush wheel.

ENF002-2

Power supply

The tool should be connected only to a power supply of

the same voltage as indicated on the nameplate, and can

only be operated on single-phase AC supply. They are

double-insulated and can, therefore, also be used from

sockets without earth wire.

GEA010-2

General power tool safety warnings

WARNING: Read all safety warnings, instructions,

illustrations and specifications provided with this

power tool. Failure to follow all instructions listed below

may result in electric shock, fire and/or serious injury.

Save all warnings and instructions for future refer-

ence.

The term “power tool” in the warnings refers to your

mains-operated (corded) power tool or battery-operated

(cordless) power tool.

GEB146-1

WHEEL SANDER SAFETY WARNINGS

1. Hold the power tool by insulated gripping sur-

faces, because the wheel may contact its own

cord. Cutting a “live” wire may make exposed metal

parts of the power tool “live” and could give the oper-

ator an electric shock.

2. Always use safety glasses or goggles. Ordinary

eye or sun glasses are NOT safety glasses.

3. Inspect for and remove foreign matter such as

nails, screws, etc. from the workpiece surface

before operation.

4. Secure the workpiece firmly.

5. Do not wear gloves during operation.

6. Hold the tool firmly with both hands.

7. Keep hands away from rotating parts.

8. Do not leave the tool running. Operate the tool

only when hand-held.

9. Never attempt to use with the tool held upside

down in a vise, etc.

10. Some material contains chemicals which may be

toxic. Take caution to prevent dust inhalation

and skin contact. Follow material supplier safety

data.

11. Use of this tool to sand some products, paints

and wood could expose user to dust containing

hazardous substances. Use appropriate respira-

tory protection.

SAVE THESE INSTRUCTIONS.

WARNING:

DO NOT let comfort or familiarity with product

(gained from repeated use) replace strict adherence

to safety rules for the subject product. MISUSE or

failure to follow the safety rules stated in this instruc-

tion manual may cause serious personal injury.

FUNCTIONAL DESCRIPTION

CAUTION:

• Always be sure that the tool is switched off and

unplugged before adjusting or checking function on the

tool.

Adjusting front roller (Fig. 1)

The front roller allows you to apply uniform pressure to

the workpiece. To adjust the front roller, set the tool on a

flat surface and loosen the wing nut. Adjust the front

roller up or down until the clearance distance (D) is about

2 mm. Tighten the wing nut securely.

Switch action (Fig. 2)

CAUTION:

• Before plugging in the tool, always check to see that

the switch trigger actuates properly and returns to the

“OFF” position when released.

To start the tool, simply pull the switch trigger. Release

the switch trigger to stop.

For continuous operation, pull the switch trigger and then

push in the lock button.

To stop the tool from the locked position, pull the switch

trigger fully, then release it.

ASSEMBLY

CAUTION:

• Always be sure that the tool is switched off and

unplugged before carrying out any work on the tool.

Product specificaties

Merk:	Makita
Categorie:	Schuurmachine
Model:	9741
Gewicht:	4200 g
Breedte:	185 mm
Diepte:	310 mm
Hoogte:	182 mm
Stroombron:	AC
Vermogen:	860 W
Input vermogen:	860 W
Stationair toerental (max):	3500 RPM
Type schuurmachine:	Schuurmachine
AC-ingangsspanning:	115 V