Makita 6807 Handleiding

Makita Schroefmachine 6807

Lees hieronder de 📖 handleiding in het Nederlandse voor Makita 6807 (12 pagina's) in de categorie Schroefmachine. Deze handleiding was nuttig voor 50 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/12

GB 2-Speed Screwdriver

Instruction Manual

F 2 Vitesses visseuse

Manuel d’instructions

D 2-Gang Schrauber

Betriebsanleitung

I 2 Velocità avvitatrice

Istruzioni per l’uso

NL 2 Snelheden schroevedraaier

Gebruiksaanwijzing

E 2 Velocidad atornillador

Manual de instrucciones

Chave de parafusos de 2 velocidades Manual de instruções

Skruemaskine med 2 hastigheder Brugsanvisning

2- Snabbskruvdragare Bruksanvisning

2-Hastighets Skrutrekker Bruksanvisning

2 Pikaruuvinväännin Käyttöohje

GR Κατσαβίδι 2 ταχυτήτων Οδηγίες χρήσεως

6807

1 2

3 4

5 6

7 8

9 9 1010

8-28-1

ENGLISH

Explanation of general view

1 Locking sleeve

2 Approximately 1 mm

3 Locator

4 Bit

5 Magnetic bit holder

6 Switch trigger

7 Lock button

8 Reversing switch lever

9 Speed change knob

10 Pointer

SPECIFICATIONS

Model 6807

Capacities

Self drilling screw ........................................High: 6 mm

Low: 8 mm

Drywall screw .............................................High: 5 mm

Low: 5 mm

No load speed (min–1) .............................High: 0 – 2,200

Low: 0 – 1,000

Overall length .....................................................318 mm

Net weight .............................................................. 2.0 kg

• Due to our continuing program of research and devel-

opment, the specifications herein are subject to change

without notice.

• Note: Specifications may differ from country to country.

Power supply

The tool should be connected only to a power supply of

the same voltage as indicated on the nameplate, and can

only be operated on single-phase AC supply. They are

double-insulated in accordance with European Standard

and can, therefore, also be used from sockets without

earth wire.

Safety hints

For your own safety, please refer to the enclosed safety

instructions.

SPECIFIC SAFETY RULES

GEB017-1

DO NOT let comfort or familiarity with product

(gained from repeated use) replace strict

adherence to screwdriver safety rules. If you use

this tool unsafely or incorrectly, you can suffer

serious personal injury.

1. Hold power tools by insulated gripping surfaces

when performing an operation where the cutting

tool may contact hidden wiring or its own cord.

Contact with a “live” wire will make exposed metal

parts of the tool “live” and shock the operator.

2. Always be sure you have a firm footing. Be sure

no one is below when using the tool in high loca-

tions.

3. Hold the tool firmly.

4. Keep hands away from rotating parts.

5. Do not touch the bit or the workpiece immedi-

ately after operation; they may be extremely hot

and could burn your skin.

SAVE THESE INSTRUCTIONS.

WARNING:

MISUSE or failure to follow the safety rules stated

in this instruction manual may cause serious per-

sonal injury.

OPERATING INSTRUCTIONS

Depth adjustment

The depth can be adjusted by turning the locking sleeve.

Turn it in “A” direction for less depth and in “B” direction

for more depth. One full turn of the locking sleeve equals

1.5 mm change in depth. (Fig. 1)

Adjust the locking sleeve so that the distance between

the tip of the locator and the screw head is approximately

1 mm as shown in Fig. 2 or 3. Drive a trial screw into your

material or a piece of duplicate material. If the depth is

still not suitable for the screw, continue adjusting until you

obtain the proper depth setting. (Fig. 2 & 3)

Removing or installing bit (Fig. 4 & 5)

Important:

Always be sure that the tool is switched off and

unplugged before removing or installing the bit.

To remove the bit, first pull the locator out of the locking

sleeve. Then grasp the bit with a pair of pliers and pull the

bit out of the magnetic bit holder. Sometimes, it helps to

wiggle the bit with the pliers as you pull.

To install the bit, push it firmly into the magnetic bit

holder. Then install the locator by pushing it firmly back

onto the locking sleeve.

Switch action (Fig. 6)

CAUTION:

Before plugging in the tool, always check to see that the

switch trigger actuates properly and returns to the “OFF”

position when released.

To start the tool, simply pull the trigger. tool speed is

increased by increasing pressure on the trigger. Release

the trigger to stop.

For continuous operation, pull the trigger and then push

in the lock button. To stop the tool from the locked posi-

tion, pull the trigger fully, then release it.

NOTE:

Even with the switch on and motor running, the bit will not

rotate until you fit the point of the bit in the screw head

and apply forward pressure to engage the clutch.

Product specificaties

Merk:	Makita
Categorie:	Schroefmachine
Model:	6807
Snoerlengte:	2.5 m
Stroombron:	AC
Input vermogen:	500 W
Stationair toerental (max):	1000 RPM
Aantal versnellingen:	2
Schroefdiameter:	6.3 mm