MAGUS Metal 650 BD Handleiding
MAGUS
Miscroscoop
Metal 650 BD
Lees hieronder de 📖 handleiding in het Nederlandse voor MAGUS Metal 650 BD (26 pagina's) in de categorie Miscroscoop. Deze handleiding was nuttig voor 5 personen en werd door 3 gebruikers gemiddeld met 4.3 sterren beoordeeld
Pagina 1/26
MAGUS METAL 650 | 650 BD
METALLURGICAL MICROSCOPE
U S E R M A N U A L
LevenhukInc. (USA)
928 E 124th Ave. Ste D, Tampa, FL 33612, USA
+1 813 468-3001
contact_us@levenhuk.com
LevenhukOptics s.r.o. (Europe)
VChotejně 700/7, 102 00 Prague 102, Czech Republic
+420 737 004-919
sales-info@levenhuk.cz
Magus® is a registered trademark of Levenhuk, Inc.
© 2006–2024 Levenhuk, Inc. All rights reserved.
www.levenhuk.com
20241204
3
Before using the microscope, please read this user manual carefully to study
the instrument design, operation modes and procedures, operational
limitations, and safety precautions.
Due to the continuous improvements in the microscope design, this manual
may not reflect minor design changes that do not affect the microscope
performance and operation procedures.
SAFET Y PRECAUTIONS
Microscope
1. To avoid electric shock or fire, switch off and unplug the microscope before assembling
the microscope, replacing the bulb or fuse.
2. Do not disassemble the microscope, except for the removable parts specified in this manual.
This can seriously damage its performance. In case of malfunction, please contact a qualified
service center.
3. Make sure that the input voltage of the microscope matches that of the local power supply.
Using the power supply with the wrong input voltage may cause a short circuit or fire.
4. Using an incorrect bulb, fuse, or power cord may damage the microscope or cause a fire.
The power cord must be grounded reliably.
5. In order to avoid a short circuit or any other malfunction, do not expose the microscope to high
temperatures or humid or moist environments for a long period of time.
6. If water splashes on the microscope, immediately switch the power off, unplug the power
cord, and wipe off the water with a dry cloth.
7. The microscope light bulb generates high temperatures during operation. To avoid burns,
do not touch the collector lens or the bulb itself for 10 minutes after the lights have been
switched off. To prevent fire, do not place paper or flammable or explosive materials near
the air vents on the underside of the base.
8. The microscope employs a coaxial coarse/fine focusing mechanism. Do not turn the left/right
coarse/fine focusing knobs in opposite directions. When the limit is reached, you should
no longer rotate the coarse focusing knob.
9. Do not expose the microscope to direct sunlight or other light sources. Do not expose the
microscope to high temperatures, humidity, or dust; otherwise, it may cause condensation,
mold growth, or contamination of the optical parts.
10. Do not touch the lens surfaces with your fingers. Use a brush and special lens-cleaning
solution to keep the lenses clean.
Product specificaties
| Merk: | MAGUS |
| Categorie: | Miscroscoop |
| Model: | Metal 650 BD |
Heb je hulp nodig?
Als je hulp nodig hebt met MAGUS Metal 650 BD stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Miscroscoop MAGUS
9 Juni 2025
Handleiding Miscroscoop
- Miscroscoop National Geographic
- Miscroscoop Steinberg
- Miscroscoop Nikon
- Miscroscoop Traveler
- Miscroscoop Leica
- Miscroscoop Dnt
- Miscroscoop Maginon
- Miscroscoop Vivitar
- Miscroscoop PCE Instruments
- Miscroscoop Zeiss
- Miscroscoop Celestron
- Miscroscoop Bresser
- Miscroscoop Ideal Tek
- Miscroscoop Swift
- Miscroscoop Carson
Nieuwste handleidingen voor Miscroscoop
9 Juni 2025
9 Juni 2025
9 Juni 2025
9 Juni 2025
9 Juni 2025
9 Juni 2025
9 Juni 2025
9 Juni 2025
9 Juni 2025
9 Juni 2025