MAGUS Bio D250TL Handleiding
MAGUS
Miscroscoop
Bio D250TL
Bekijk gratis de handleiding van MAGUS Bio D250TL (31 pagina’s), behorend tot de categorie Miscroscoop. Deze gids werd als nuttig beoordeeld door 17 mensen en kreeg gemiddeld 5.0 sterren uit 9 reviews. Heb je een vraag over MAGUS Bio D250TL of wil je andere gebruikers van dit product iets vragen? Stel een vraag
Pagina 1/31
MAGUS BIO D250T LCD | MAGUS BIO D250TL LCD
BIOLOGICAL DIGITAL MICROSCOPE
U S E R M A N U A L
2
Before using the microscope, please read this user manual carefully to
study the instrument design, operation modes and procedures, operational
limitations, and safety precautions.
Due to the continuous improvements in the microscope design, this manual
may not reflect minor design changes that do not affect the microscope
performance and operation procedures.
SAFETY PRECAUTIONS
MICROSCOPE
1. To avoid electric shock or fire, switch off and unplug the microscope before assembling the microscope, replacing
the bulb or fuse.
2. Do not disassemble the microscope, except for the removable parts specified in this manual. This can seriously
damage its performance. In case of malfunction, please contact a qualified service center.
3. Make sure that the input voltage of the microscope matches that of the local power supply. Using the power supply
with the wrong input voltage may cause a short circuit or fire.
4. Using an incorrect bulb, fuse, or power cord may damage the microscope or cause a fire. The power cord must be
grounded reliably.
5. In order to avoid a short circuit or any other malfunction, do not expose the microscope to high temperatures or
humid or moist environments for a long period of time.
6. If water splashes on the microscope, immediately switch the power off, unplug the power cord, and wipe off the
water with a dry cloth.
7. The microscope light bulb generates high temperatures during operation. To avoid burns, do not touch the collector
lens or the bulb itself for 10 minutes after the lights have been switched off. To prevent fire, do not place paper or
flammable or explosive materials near the air vents on the underside of the base.
8. The microscope employs a coaxial coarse/fine focusing mechanism. Do not turn the left/right coarse/fine focusing
knobs in opposite directions. When the limit is reached, you should no longer rotate the coarse focusing knob.
9. Do not expose the microscope to direct sunlight or other light sources. Do not expose the microscope to high
temperatures, humidity, or dust; otherwise, it may cause condensation, mold growth, or contamination of the
optical parts.
10. Do not use any other oily substance instead of proper immersion oil made specifically for the given purpose, as this
will degrade the image quality and damage the lenses.
11. Do not touch the lens surfaces with your fingers. Use a brush and special lens-cleaning solution to keep the lenses
clean.
3
BU L B I N STA LLAT ION (FO R MO D ELS WIT H HA L OGE N BU L BS)
–
Do not touch the glass surface of the bulb with your bare hands. When installing the bulb, wear gloves (supplied) or
wrap the bulb with a cotton cloth.
–
Use a clean cotton cloth moistened with alcohol-based disinfectant to wipe dirt off the surface of the bulb. Dirt may
etch the surface of a bulb, thereby reducing its brightness and shortening its life.
–
Check the bulb contact condition. If contact damage occurs, the bulb may stop working or cause a short circuit.
–
When replacing the bulb, its base should be inserted as deeply as possible into the socket. If the bulb is not
correctly inserted, it may pop out of the socket or cause a short circuit.
CA M ERA
1. Never view the sun, another bright source of light or a laser through a camera – THIS IS DANGEROUS FOR YOUR
EYESIGHT!
2. Do not disassemble the camera yourself.
3. Keep the camera away from moisture and do not use it in the rain.
4. Protect the camera from shocks, excessive stress from other objects.
5. Store the camera away from corrosive environments, household and car heaters, switched-on light bulbs and
open flames.
6. If there is dirt on the optical surfaces, first blow off dust and small particles or brush them off with a soft brush,
then clean the surface with a soft, clean cloth moistened with alcohol or ether.
7. If any instrument part or power component has been swallowed, seek medical attention immediately.
MO N ITO R
1. Make sure that the input voltage of the monitors matches that of the local power supply. Using the power supply
with the wrong input voltage may cause a short circuit or fire.
2. Do not use the damaged power source.
3. Do not use the damaged power cord.
4. Do not insert foreign objects into the slot on the monitor body.
5. Do not expose the monitor to high temperatures or humidity for a long time.
6. If water splashes on the monitor, immediately switch the power off, unplug the power cord, and wipe off the water
with a dry cloth.
7. Protect the monitor from shocks, excessive stress from other objects.
8. Store the monitor away from corrosive environments, household and car heaters, switched-on light bulbs and
open flames.
Product specificaties
| Merk: | MAGUS |
| Categorie: | Miscroscoop |
| Model: | Bio D250TL |
Heb je hulp nodig?
Als je hulp nodig hebt met MAGUS Bio D250TL stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Miscroscoop MAGUS
17 Juli 2025
16 Juli 2025
16 Juli 2025
15 Juli 2025
15 Juli 2025
15 Juli 2025
15 Juli 2025
15 Juli 2025
15 Juli 2025
15 Juli 2025
Handleiding Miscroscoop
- Traveler
- PCE Instruments
- Reflecta
- Veho
- Discovery
- Leica
- Maginon
- Swift
- National Geographic
- Steinberg
- Levenhuk
- BeaverLab
- Barska
- Vivitar
- Celestron
Nieuwste handleidingen voor Miscroscoop
30 Juli 2025
16 Juli 2025
15 Juli 2025
15 Juli 2025
15 Juli 2025
15 Juli 2025
15 Juli 2025
15 Juli 2025
15 Juli 2025
15 Juli 2025