M-Audio Keystation Pro 88 Handleiding

M-Audio Niet gecategoriseerd Keystation Pro 88

Lees hieronder de 📖 handleiding in het Nederlandse voor M-Audio Keystation Pro 88 (27 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 64 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/27

Keystation Pro 88 Advanced Guide

Contents:

1 Getting Started

2 Terminology

3 Performance Operations of the Keystation Pro 88

• Sending Program Changes During Performance

• Sending Bank Changes During Performance

• Sending Snap Shot

• Muting All Controllers

• Drawbar Mode

• Changing Zones

4 Programming and Editing the Keystation Pro 88

• Introduction to Programming Options

• Selecting a Controller for Editing

• Assigning MIDI CCs

• Assigning an Individual MIDI Channel

• Changing the Global Channel

• Setting Toggle Values for the Buttons

• RPN/NRPN, SysEx and Other Advanced Messages

• Assigning MMC Control to a Button

• Assigning RPN/NRPN to a Fader/Rotary Controller

• Assigning a Note to a Button

• About SysEx Messages and Device ID

• Non-Volatile Memory

• Memory Dump

• Assigning Device ID

• Resetting to the Factory Default Setting

• Save/Recall of Individual Groups of Controllers

• Programming Zones

• How to Transpose or Change the Octave of a Zone

• The Program, Bank LSB and Bank MSB of a Zone

• Setting the Channel of a Zone

• Group A Controllers

5 The Evolution Librarian

• About the Librarian Software

• Installing the Librarian Software

• Setting Up the Librarian Software

• Librarian Overview

• Organizing Presets Received from a Device

• Viewing The Contents of a Memory

• Saving a Setup

• Loading a Setup

6 MIDI In/Out and MIDI Messages Explained

• MIDI In / Out Signal Flow Diagram

• About the MIDI In Port

• About the MIDI Out Port

• Program and Bank Changes Explained

• RPN / NRPRs Explained

• SysEx Explained

7 Appendices

• Appendix A – MIDI Implementation Chart

• Appendix B1 – Assignable MIDI CC’s (Faders & Rotary Controllers)

• Appendix B2 – Assignable MIDI CC’s (Buttons)

• Appendix C – Hexadecimal Conversion Chart

• Appendix D1 – General MIDI Instruments

• Appendix D2 – MIDI Note Numbers

• Appendix E – Standard MIDI Controller Numbers (MIDI CC’s)

1 Getting Started

Before you begin the Keystation Pro 88 Advanced Guide, we suggest that you take the

time to familiarize yourself with the Getting Started Guide, a printed manual that

accompanied your Keystation Pro 88. (You can also download the Getting Started

Guide from www.m-audio.com.)

The Getting Started Guide provides an explanation of the Keystation Pro 88’s layout and

basic functions. This manual builds on the Getting Started Guide to give you a full

understanding of the powerful features of the Keystation Pro 88.

2 Terminology

In order to get the most out of this Guide, please familiarize yourself with the following terms:

Edit Mode:

Edit Mode describes the short period of time (three seconds) after a function button has

been pressed, during which time the parameters of that function can be altered via the

numeric keypad. No data is sent out of the Keystation Pro 88 when it is in Edit Mode,

except for Program and Bank Changes. LCD symbols shown in Edit Mode indicate that

a particular parameter can be edited. If a number is partially entered and a new

controller turned, that number will become the relevant parameter number for the new

controller and the three second editing period will retrigger.

Default Mode:

Default Mode describes the state of the Keystation Pro 88 when no function buttons

have been pressed within the last three seconds. In Default Mode, the LCD shows the

controller symbol, and the two-digit display shows the last selected controller. The three-

digit display shows the currently assigned MIDI CC number.

Zone Edit Mode:

Zone Edit Mode describes the period of time between the pressing of a Zone Range

button—or the selection of a Group A controller—and when the operation becomes

complete. During Zone Edit Mode, the LEDs above the Zone buttons will flash to indicate

that the Zones can be selected for editing. The LCD will also flash the Zones that are

currently selected for editing.

3 Performance Operations of the Keystation Pro 88

Sending Program Changes During Performance

You can send out a Program Change message to your sound module, instrument or any

other device that will receive this standard MIDI message. The Program Change will be

sent on the Zones that are active at that time.

Product specificaties

Merk:	M-Audio
Categorie:	Niet gecategoriseerd
Model:	Keystation Pro 88

Heb je hulp nodig?

Als je hulp nodig hebt met M-Audio Keystation Pro 88 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden

Uw naam*

Jouw email*

Schrijf hier uw vraag

Handleiding Niet gecategoriseerd M-Audio

M-Audio SBX10 Handleiding

21 Juni 2023

M-Audio MidAir Handleiding

20 Juni 2023

M-Audio Delta 44 Handleiding

19 Juni 2023

M-Audio ProKeys 88sx Handleiding

19 Juni 2023

M-Audio Studiophile DX4 Handleiding

18 Juni 2023

M-Audio Solaris Handleiding

18 Juni 2023

M-Audio Firewire 1814 Handleiding

17 Juni 2023

M-Audio Revolution 7.1 Handleiding

17 Juni 2023

M-Audio X-Session UC-17 Handleiding

16 Juni 2023

M-Audio SAM Handleiding

15 Juni 2023

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd

Playtive IAN 327221 Handleiding

1 Mei 2024

Samsung UN32J4001AF Handleiding

1 Mei 2024

Bauknecht KSI 18GF2 P2 Handleiding

27 April 2024

Fakir Artemis TS 150 Handleiding

26 April 2024

Sony UTX-M03 Handleiding

26 April 2024

Sony URX-P03 Handleiding

26 April 2024

Sony WRU-806B Handleiding

26 April 2024

Sony UTX-B03 Handleiding

26 April 2024

Sony UTX-P03 Handleiding

26 April 2024

Sony ODS-L10 Handleiding

26 April 2024