Lynx Technik Yellowbrik CHD 1402 Handleiding

Lynx Technik Niet gecategoriseerd Yellowbrik CHD 1402

Lees hieronder de 📖 handleiding in het Nederlandse voor Lynx Technik Yellowbrik CHD 1402 (7 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 43 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/7
yellobrik
®
Quick
Reference
yellobrik
®
LYNX
Technik
AG |
www.lynx-technik.com
CHD 1402
4K HDMI to 12G SDI Converter
Laser Radiation
Do not look directly into emitter
with optical instruments
WARNING
CLASS 1M LASER PRODUCT
SDI Output 1
Modul Reset
USB
SDI Fiber Output
SDI Output 2
HDMI
HDMI LED
12V Power Input
USB
PC Control
Reset
HDMI
®
CHD 1402
0V12V
⎓
+ –
WARNING
CLASS 1
La odser Pr uct
GREEN Po r ok + No programm settingswe ed
YE LLOW Power + progr med se i sok am tt ng
YELLOW (Blinking) “Locate“ function active
OFF No Power Connected
GREEN HDMI Input Present
OFF No HDMI Input
Factory Reset: Press reset button on side
to reset module
321
to 12G SDI
®
Conve errt
SDI Outputs
LED
Power + Se s LEDtting
HDMI LED
Power +
Pr e sog.S tting
FAQ
HDMI connected, but no SDI output?
When two HDMI devices are connected together, the EDID communication
protocol automatically determines the highest resolution both devices
support and congures the HDMI link to that resolution. CHD 1402 supports
video formats up to 2160p60. If the HDMI Input is 2160p60, the SDI Output per
default will be 12G SDI.
If 3G, 1.5G or 270M SDI output is needed, the HDMI source device should
be manually set to output the desired video resolution.
The CHD 1402 has no internal scaler, but it is possible to use force the desired
video format with LynxCentraal or yelloGUI. This is done by forcing the formats
reported over EDID. As a result the recognized HDMI resolution is changed and
the output is either cropped or boxed. For examples where HDMI formats
result in either cropping, boxing, or any combination of both, please refer to
the datasheet.
HDMI LED o, but connected?
The HDMI content may have HDCP copy protection, in which case the HDMI
present LED will be OFF and the module will block the conversion and provide
a black SDI output.
Note: Consumer devices usually include HDCP copy protection even if the source media is not copy
protected. Please verify the operation of the yellobrik module on a HDMI source which is known not to
have HDCP copy protection (e.g. most HDMI cameras) before contacting technical support.
Compatible Formats?
Any HDMI input can have a wide range of formats. These
vary not only in resolution, but also aspect ratio. We
compiled a list of expected, compatible formats. It can be
found on the product page.
Note: We continuously work on improving our products, this list might
expand in the future.
lynx-technik.com/p/chd_1402
Technical Specications
HDMI Input Type A 2.0b connector for up to 2160p60
Up to 8 channels embedded audio in HDMI is passed transparently
SDI Outputs 2 x SDI video, 75 Ohm BNC (both have the same signal - NOT dual link)
SMPTE 259M, SMPTE 292M, SMPTE 424M, SMPTE 2081-1, SMPTE 2082-1
Electrical Return Loss: to 1.5GHz
>15dB
to 3GHz
>10dB
to 6GHz
>7dB
to 12GHz
>4dB
Fiber Output Optional plug in SFP for optical SDI output (see ber options table)
Power +12V DC @ 9.3W nominal - ( supports 10 - 24V DC input range )
We are constantly adding more yellobrik modules.
Visit our website for the latest product updates.
yellobrik.lynx-technik.com
Connections
All connections are clearly indicated on the module.
The ber SDI output is optional and can be added at
any time if needed using the socket provided (plug in
SFP module).
Operation
The CHD 1402 module is a powerful HDMI to SDI conversion device. It auto-
detects the connected HDMI standard and, if valid, converts it to SDI. The HDMI
is converted to an SDI signal in its native SDI resolution (no scaling). Any audio
present on the HDMI signal will be automatically embedded into the SDI outputs.
HDCP Copy Protection
The CHD 1402 WILL NOT convert any HDCP encrypted content. If a HDMI source
is connected and the “HDMI present” is o then the HDMI content is most likely
protected with HDCP.
Audio
Up to 8 channels of audio present on the HDMI input are automatically
embedded into the SDI outputs (AES channels 1, 2, 3, 4).
The HDMI audio is not modied or decoded. If encoded audio is present such as
Dolby Digital then this encoded stream will be embedded (transparently) into
the SDI output.
Note: One AES channel = two channels of audio.
Fiber Output (optional)
An SDI ber output is provided via a removable SFP ber stick. This can be
a standard SDI Transmitter (1310nm) or if needed CWDM versions are also
available (18 wavelength choices). Please contact LYNX Technik for more details
on the ber options compatible with this module.
Module LEDs
The module has several LEDs included to indicate status:
HDMI Present LED
Green Valid HDMI signal connected
O Non valid HDMI signal or signal missing
Power / Prog Setting LED
Green Power OK and no internal programmed settings are present
Yellow Power OK and some programmed settings are active*
O Power not present
* Some additional internal settings have been made using control software and the LED indicates this
by turning yellow. The module can be reset to factory defaults by using the GUI or reset switch (recessed
under a hole on the side of the module). When reset the LED will change back to green.
USB Port / Firmware Updates / Control Software
The USB interface on the module is used for rmware updates and for control of
the module using the yelloGUI or LynxCentraal software applications.
To update a yellobrik, power it and connect it to the PC or Mac running the
yelloGUI software with the provided USB cable. The yelloGUI software will
indicate if a new rmware is available for the connected module and will guide
you through the update process.
For updates through LynxCentraal, just click the “Update” button on the left side.
From there you can pick and choose which device to update.
Firmware updates are always free of charge.
Fiber I/O Options
The module can accommodate several ber options, which are detailed below.
These are SFP sub modules and plug into the side of the module. We can
also supply CWDM versions in 18 dierent wavelengths if required (contact
LYNXTechnik for more details).
SDI Fiber Transmitter Options
Model Description Power
OH-TX-12G-LC SFP Fiber TX - Singlemode - LC connector - 10km* 0.5dBm
OH-TX-4-12G-LC SFP Fiber TX - Singlemode - LC, ST or SC conn. - 40km* 3dBm
OH-TX-12-XXXX-LC CWDM SFP Fiber TX - Singlemode LC Conn. - 10km*
XXXX=Wavelength. 18 according to ITU T G692.2
1270nm through 1610nm
3dBm
* Distances are an aproximation and can vary depending
on individual setups.
Power Lead Strain Relief
The module has a small hole in the case
located above the power connection. To
prevent the power lead being accidentally
pulled out, use the supplied tie-wrap and
secure the lead as shown
Mounting Solutions
The optional RFR 1001 mounting bracket can be used to permanently mount
the module on any surface or on 19” rack rails.
The optional RFR 1000-1 rack mount can be used to permanently mount up
to 14 yellobrik modules. In addition, the RFR 1000-1 can provide full power
redundancy for all mounted yellobriks.
yellogui.lynx-technik.com lynxcentraal.lynx-technik.com

Product specificaties

Merk: Lynx Technik
Categorie: Niet gecategoriseerd
Model: Yellowbrik CHD 1402

Heb je hulp nodig?

Als je hulp nodig hebt met Lynx Technik Yellowbrik CHD 1402 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden


Handleiding Niet gecategoriseerd Lynx Technik

Lynx Technik

Lynx Technik Yellowbrik HD 1802-1 Handleiding

11 Maart 2024
Lynx Technik

Lynx Technik Yellowbrik CDH 1411 Handleiding

11 Maart 2024
Lynx Technik

Lynx Technik Yellowbrik CHD 1402 Handleiding

11 Maart 2024
Lynx Technik

Lynx Technik Yellowbrik QS 1441 Handleiding

11 Maart 2024
Lynx Technik

Lynx Technik Yellowbrik CHD 1812-1 Handleiding

11 Maart 2024

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd

Playtive

Playtive IAN 327221 Handleiding

1 Mei 2024
Samsung

Samsung UN32J4001AF Handleiding

1 Mei 2024
Bauknecht

Bauknecht KSI 18GF2 P2 Handleiding

27 April 2024
Fakir

Fakir Artemis TS 150 Handleiding

26 April 2024
Sony

Sony UTX-M03 Handleiding

26 April 2024
Sony

Sony URX-P03 Handleiding

26 April 2024
Sony

Sony WRU-806B Handleiding

26 April 2024
Sony

Sony UTX-B03 Handleiding

26 April 2024
Sony

Sony UTX-P03 Handleiding

26 April 2024
Sony

Sony ODS-L10 Handleiding

26 April 2024