Lumie BodyClock Advanced 200 Handleiding

Lumie Lichttherapie BodyClock Advanced 200

Lees hieronder de 📖 handleiding in het Nederlandse voor Lumie BodyClock Advanced 200 (38 pagina's) in de categorie Lichttherapie. Deze handleiding was nuttig voor 27 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/38

OPERATING INSTRUC TIONS

NOTICE D’UTILISATION

BEDIENUNGSANLEITUNG

BRUKSANVISNING

GEBRUIKSAANWIJZING

OPERATING INSTRUCTIONS

Bodyclock Advanced 200

1 Safety

2 Getting started

3 The display

4 The four control buttons

5 Setting the time

6 Setting the clock to 12 or 24 hours

7 Using the Bodyclock as a reading light

8 Setting the sunrise (to wake you up)

9 Setting the wake-up speed

10 Using snooze

11 Disabling the back-up beeper

12 Setting the sunset (go-to-sleep program)

13 Setting the sunset to end as a nightlight

14 Adjusting the brightness of the clock

display

15 Setting Sleepsound (white noise)

16 Security mode

17 Demo mode

18 Problem solving

19 Programming summary

2|www.lumie.com |lumie careline 0845 658 9292

English

1Safety

!Keep the glass globe over the bulb, unless the bulb is cold and the

lamp unplugged.

!Maximum 42W halogen bulb/40W candle bulb.

!The glass globe will be warm to the touch, so keep it clear of

anything that might deteriorate in contact with heat.

!Keep the Bodyclock away from water and damp. For indoor use only.

!Don't open the casing for any reason. There are no user-serviceable

parts inside.

2Getting started

!Remove the 'globe', the glass cover over the bulb, with a gentle

upward tug.

!Screw in the bulb ﬁrmly and replace the globe.

!Find a good position for the Bodyclock close to the bed-head.

!Plug the Bodyclock into the mains. The display will ﬂash on and off

until the time has been set.

!Once you've programmed the Bodyclock Advanced, all settings will

be memorised if the unit is unplugged or if there's a power failure. If

the power is out for a short period, it will even keep track of time.

!To program the clock A must be depressed ( not lit). Pressing the

P button repeatedly will take you through each of the

programming options in turn (see 19 for the list of options). Within

the next few seconds press +or – to change the setting. NOTE: the

clock will revert to its normal state if no button is pressed for 12

seconds.

!When replacing the bulb, always unplug the Bodyclock. Spare

sunshine neodymium bulbs are available from the Lumie Careline.

4|www.lumie.com |lumie careline 0845 658 9292

English

Product specificaties

Merk:	Lumie
Categorie:	Lichttherapie
Model:	BodyClock Advanced 200
Gewicht:	1200 g
Breedte:	240 mm
Diepte:	180 mm
Hoogte:	180 mm
Soort:	Wakker-word-licht
Snooze functie:	Ja
FM-radio:	Nee
Levensduur lamp:	- uur
Kleur licht:	Amber
Lichtintensiteit:	- Lux
Zonsopgang simulatie:	Ja
Zonsondergangsimulatie:	Ja
Wake-up Light lamp:	42 W
Vervangbare lamp:	Ja