Lowrance SonarHub Handleiding

Lowrance Hifi systeem SonarHub

Lees hieronder de 📖 handleiding in het Nederlandse voor Lowrance SonarHub (4 pagina's) in de categorie Hifi systeem. Deze handleiding was nuttig voor 33 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/4
| 1
Guide | SonarHub
SonarHub guide
SonarHub
You can use the SonarHub to view data from CHIRP, single
frequency and StuctureScan HD transducers.
¼Note: When a CHIRP transducer is in use, you will not be able to
view returns from single frequency sonar or StructureScan HD. You
can view CHIRP and StructureScan HD at the same time by using
two SonarHubs or by connecting your StructureScan HD transducer
directly to your HDS Gen2 Touch display unit or to the LSS-1 or LSS-2
attached to your HDS Gen2 display unit.
CHIRP
A CHIRP (Compressed High Intensity Radar Pulse) transducer sends
out an elongated pulse that broadcasts all frequencies within the
bandwidth of the selected transducer type (Low CHIRP, Medium
CHIRP, High CHIRP). This results in greater depth penetration, better
target separation and enhanced image quality.
¼Note: Your CHIRP transducer will only support one of the
frequencies listed below (Low, Medium or High).
CHIRP frequencies
Low CHIRP Provides the best depth penetration with lower
resolution images
Medium CHIRP Better depth penetration than High CHIRP, but
with minimal loss of target definition
High CHIRP Offers high resolution images in shallow water
2 | Guide | SonarHub
Single frequency transducers
Provides a traditional sonar view of the area under and around your
boat, allowing you to detect fish and examine bottom structure.
Single sonar frequencies
50kHz Lower resolution; best performance in deep water
83kHz Wider cone angle provides greater water coverage
200kHz High resolution; highest sensitivity and better target
separation in shallow water
StructureScan HD transducers
StructureScan HD uses high frequencies to provide a high-
resolution, picture-like image of the bottom.
StructureScan Frequencies
455kHz Excellent resolution and greater range than 800kHz
800kHz Better definition than 455kHz at shallower depths
Selecting a frequency
You can view CHIRP, single frequency sonar or StructureScan sonar
data by selecting the desired frequency from the transducer type
dropdown menu.
Refer to your unit’s operation manual for instructions on selecting a
transducer type.
| 3
Guide | SonarHub
Updating software
To take advantage of SonarHub features, you may need to update
the software on your display unit.
For Lowrance:
http://www.lowrance.com/en-US/Software-Updates/
For Simrad:
http://www.simrad-yachting.com/en-US/Support/Downloads/
Compliance Statements
The SonarHub comply with the following regulations:
• CE under EMC directive 2004/108/EC
• Level 2 devices of the Radio communications (Electromagnetic
Compatibility) standard 2008
The relevant Declaration of Conformity is available in the following
websites under model documentation section:
www.simrad-yachting.com, www.lowrance.com

Product specificaties

Merk: Lowrance
Categorie: Hifi systeem
Model: SonarHub

Heb je hulp nodig?

Als je hulp nodig hebt met Lowrance SonarHub stel dan hieronder een vraag en andere gebruikers zullen je antwoorden


Handleiding Hifi systeem Lowrance

Lowrance

Lowrance SonarHub Handleiding

17 Mei 2023

Handleiding Hifi systeem

Nieuwste handleidingen voor Hifi systeem

Philips

Philips DTM3170 Handleiding

30 April 2024
Philips

Philips MC-120 Handleiding

26 April 2024
Panasonic

Panasonic SC-AK630 Handleiding

22 April 2024
Philips

Philips FW-C355 Handleiding

15 April 2024
Sony

Sony DHC-MD373 Handleiding

15 April 2024
Philips

Philips BTB2570 Handleiding

15 April 2024
Thomson

Thomson DS121CD Handleiding

13 April 2024
Thomson

Thomson DS122CD Handleiding

13 April 2024
Panasonic

Panasonic RX-D15 Handleiding

11 April 2024
RCF

RCF NDX595 Handleiding

10 April 2024