Lorus Z014 Handleiding

Bekijk gratis de handleiding van Lorus Z014 (2 pagina’s), behorend tot de categorie Horloge. Deze gids werd als nuttig beoordeeld door 19 mensen en kreeg gemiddeld 4.0 sterren uit 5 reviews. Heb je een vraag over Lorus Z014 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

■CHARACTERISTICS

1. Analogue & digital time displays:Hour,

Minute, Second, Month, Date and day of the

week.

2. Time Indication: 12-hour display format with

PM indicator and 24-hour display format are

available.

3. Daily alarm: The alarm can be set to sound

at the designated time on a 24-hour basis.

4.Chime: The chime can be set to sound every

hour on the hour with a single beep.

5. Stop wat ch: The stopwatch can measure

up to 23 hours 59 minutes and 59 seconds in

1/100-second increments. Lap time measure-

ment is available.

6. 100 M Water Resistant

7. Illuminating light: The built-in electro-

luminescent (EL) backlight illuminates the

display for easy viewing in darkness.

■ DISPLAY AND BUTTON OPERATION

■

HOW TO SET NORMAL TIME

■ HOW TO SET ALARM TIME

1. From NORMAL TIME display, press and hold S3

button for 2 seconds to show the ALARM TIME

display. The hour digits start flashing.

* The display is changed automatically to the

ALARM TIME after 2 seconds.

2. Press S3 button again to move on to SECONDS

setting. The second digits start flashing.

3. Press S2 button to set SECONDS setting.

4. Press S1 button to move on to MINUTES setting.

* Selection of the digits to be adjusted (flashing)

is made in the order below by pressing S1 but-

ton and then pressing S2 button to be set.

5. After all the adjustment are completed, press

S3 button to return to the NORMAL TIME display.

NREZ014 8-2010

CAL. Z014 (R23 SERIES)

■

HOW TO DISPLAY MONTH/DATE

* Press S2 button and hold to show the ALARM

TIME. Release S2 button to return to the NOR-

MAL TIME display.

* Press S1 button and hold to show the MONTH/

DATE or DATE/MONTH. Release S2 button to re-

turn to the NORMAL TIME display.

* Press S3 button at any time to return to the

NORMAL TIME display.

■ SETTING THE TIME (ANALOGUE)

1. Pull the crown out one step, the second hand

will stop.

2. Set the correct time by turning the crown.

3. Push the crown back to the original position.

The watch will start running again.

* The analogue indication and digital display of

the time setting can be adjusted separately.

1. From NORMAL TIME display, press and hold S3

button for 2 seconds to show the ALARM TIME

display. The hour digits start flashing.

* The display is changed automatically to the

ALARM TIME after 2 seconds.

2. Press S2 button to set HOURS setting.

3. Press S1 button to move on to MINUTES setting.

4. Press S2 button to set MINUTES setting.

5. After all the setting are completed, press S3

button to return to the NORMAL TIME display.

■

HOW TO SWITCH 12-HOUR/24-HOUR

F O R M AT

HO U RS

DAY OF

WEEK

CHIME

SIGN AL

M IN U T E S

SECO NDS

AL AR M

SIGNAL

ANIMATION

DO TS

M O NTH/ DATE

NORMAL TIME

MINUTES

SETTING

SECONDS

SETTING

Engagement/Disengagement of ALARM &

CHIME

* Press S2 button and hold it, and then press S1

button, the ALARM and CHIME can be en-

gaged or disengaged in the order below.

* The ALARM signal and/or CHIME signal appear

or disappear on the display accordingly.

1. Press S1 or S2 button and hold it. Then press S3

button to switch the display.

* The time display format in either 12-hour indi-

cation or in 24-hour indication can be selected

alternately.

* Under the 12-hour indication format, "PM" mark

appears in the afternoon, but no AM mark ap-

pears in the morning. Under the 24-hour indi-

cation format, no mark appears on the display.

S3

S1

S2

S3

S4

CROWN

CROWN

AF T E R -

NO O N

PRESS AND

HOLD

S3

ALA RM

S2

PRESS

PRESS

S1

S1

S2

S3

PRESS

S2

PRESS

PRESS

S1

HOURS

SETTING

S2

PRESS

PRESS

S1

MONTH

SETTING

S2

PRESS

DATE

SETTING

S2

PRESS

DAY OF WEEK

SETTING

S2

PRESS

S1

S2

12 HOUR

S3

24 HOUR

PRESS

AND HOLD

S1

S2

OR

S3

PRESS

1. From NORMAL TIME display, press S1 button

and hold it to show the MONTH/DATE display.

2. Press S2 button to switch to the DATE/MONTH

display.

3. Press S2 button again to switch back to the

MONTH/DATE display.

* The display format in either DATE/MONTH in-

dication or in MONTH/DATE indication can be

selected alternately by pressing S2 button.

PRESS

AND HOLD

S1

S2

S1

NORMAL TIME

DAT E/MONT H

S2

S2

NORMAL TIME

S3

PRESS AND

HOLD

ALARM MODE

S1

S2

S3

2 SECONDS

LATER

HOURS

SETTING

S2

PRESS

PRESS

S1

S3

PRESS

S3

PRESS

MINUTES

SETTING

S2

PRESS

NORMAL TIME

S1

S2

PRESS AND

HOLD

S2

ALA RM

ALARM &

CHIME ON

CHIME

SIGN AL

AL AR M

SIGNAL

PRESS

S1

CHIME OFF

ALARM & CHIME

OFF

CHIME

OFF

PRESS AND

HOLD

S2

PRESS

S1

ALARM

OFF

PRESS AND

HOLD

S2

PRESS

S1

CHIME ON

CHIME

ON

PRESS AND

HOLD

S2

PRESS

S1

CHIME ON

ALARM ON

AFTER

NOON

PRESS

PRESS

S t art / S t op

Set

Mode

Ligh t

Product specificaties