Lorus Sports RT301GX9 Handleiding

Bekijk gratis de handleiding van Lorus Sports RT301GX9 (2 pagina’s), behorend tot de categorie Horloge. Deze gids werd als nuttig beoordeeld door 37 mensen en kreeg gemiddeld 4.4 sterren uit 8 reviews. Heb je een vraag over Lorus Sports RT301GX9 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

HOUR.

24

6

12

18

60

45 15

30

60

5

HOUR.

24

6

12

18

60

45 15

30

60

5

HOUR.

24

6

12

18

60

45 15

30

60

5

STOPWATCH

minute hand

5

nSETTING THE DATE

1. Pull out the crown to the first click.

2. Turn the crown clockwise until the desired date

appears.

3. Push the crown back in to the normal

position.

Note:Do not set the date between 9:00 p.m. and

1:00 a.m., as the date may not change

properly. If it is necessary to set the date

during that period of time, first change the

time to any time outside of this period, set

the date, and then reset to the correct

time.

• It is necessary to adjust the date at the end

of February and 30-day months.

Date

NREVD53 3-2011

CAL. VD53 (RT3 SERIE

S

)

nCHARACTERISTICS

CALIBER OF THREE HANDS WITH THREE EYES

(MINUTES,CHRONOGRAPH & 24-H OUR

INDICATOR)

1. Time: Indicated by the hour, minute and

second hands.

2. Date: Displayed in numerals.

3. Stopwatch:

Measures up to 60 minutes in

one-second increments.

nDISPLAY AND CROWN/BUTTONS

Hour hand

Second

hand

n

SETTING THE TIME AND ADJUSTING

THE STOPWATCH HAND POSITION

• This watch is so designed that

1) time setting and

2) stopwatch hand position adjustment

are both made with the crown at the second

click position. Once the crown is pulled out to

the second click, be sure to make the above

adjustments at the same time.

a b c

Dat e

24-hour hand

Minute hand

Crown

S T O PWAT C H

second hand

Minute hand

Second hand

1) Time setting

Hour hand

60

45 15

30

60

2) Stopwatch hand position adjustment

a. Normal position : Free

b. First click : Date setting

c. Second click : Time setting

Adjusting the stopwatch

hand position

C r o wn

lBefore setting the time, check that the

stopwatch measurement is stopped.

1. Pull out the crown to the second click when the

second hand is at the 12 o’clock position.

The second hand will stop on the spot.

2. Turn the crown to set the hour and minute

hands.

3. Push the crown back in to the normal position

in accordance with a time signal.

STOPWATCH

minute hand

S T O PWAT C H

second hand

Notes:

1. Do not press any button when the crown is at

the second click position, as this will move the

STOPWATCH hands.

2.When the time is set, the 24-hour hand move

correspondingly with the hour and minute

hands.

3.When setting the hour hand, check that the

24-hour hand is correctly set.

4.When setting the minute hand, first advance it

4 to 5 minutes ahead of the desired time and

then turn it back to the exact minute.

lBefore setting the time, be sure to check

that the STOPWATCH hands are in the “0”

position when the stopwatch is reset. (To

reset the stopwatch, see the “STOPWATCH”

section.)

* If either of the STOPWATCH hands is not at

the "0" position, reset them, following the

procedure below.

1. Pull out the crown to the second click.

2. Press Button A or B to reset the STOPWATCH

second and minute hands to the "0"

position.

Button A: The hands move counterclockwise.

Button B:

The hands move clockwise.

3. Push the crown back in to the normal

position.

• The stopwatch can measure up to 60 minutes

in one-second increments.

• The measured time is indicated by the

STOPWATCH hands that move independently

of the hour, minute and 24-hour hands.

• Before using the stopwatch, be sure to check

that the crown is set at the normal position

and that the STOPWATCH hands are reset to

the “0” position.

nST OP WAT CH

* If the STOPWATCH hands do not return to

the "0" position when the stopwatch is reset,

follow the procedure in the "STOPWATCH

HAND POSITION ADJUSTMENT" section.

S t ar t / St op/

Restart

R es et

S T O PWAT C H

minute hand

S T O PWAT C H

second hand

A

B

A

B

A

B

Product specificaties