Lorus Sports RM379DX9 Handleiding

Bekijk gratis de handleiding van Lorus Sports RM379DX9 (2 pagina’s), behorend tot de categorie Horloge. Deze gids werd als nuttig beoordeeld door 25 mensen en kreeg gemiddeld 4.9 sterren uit 7 reviews. Heb je een vraag over Lorus Sports RM379DX9 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

CAL. VD57 (RM3 SERIES)

CAL. V657(RJN SERIES)

8-2010

■ C H A R A C T E R I S T I C S

1. Time: Indicated by the hour, minute and

second hands.

2. Date: Displayed in numerals.

3. Stopwatch: Measures up to 60 minutes in

1/10 second increments.

•Split time measurement

■ DISPLAY AND CROWN OPERATION

Stopwatch second hand

B

A

C r ow n

Da t e

Second

click

F ir s t

click

No r mal

p os i t i on

S t op wa t ch

1/10-second hand

S t op wa t ch

mi nu t e

hand

Hour hand

Second

hand

Crown :

Normal position:Free

First click:Setting the date

Second click:•Setting the time

• Adjusting the stopwatch hand

position

■ ADJUSTING THE STOPWATCH HAND

P OS I T I ON

Before setting the time, be sure to check if the

stopwatch hands are in the “0” position when

the stopwatch is reset.

•If the stopwatch is in use, press the buttons

in the following order to reset it.

•If the stopwatch is counting:A ➡ B

•If the stopwatch is stopped:B

•If the split time is displayed:B ➡ A➡ B

•If any of the stopwatch hands do not return

to the “0” position when the stopwatch is

reset, follow the procedure below to reset

the hands.

1.Pull out the crown all the way.

2.Press “A” repeatedly to reset the stopwatch

1/10-second hand to the “0” position.

Press “B” repeatedly to reset the stopwatch

second and minute hands to the “0” position.

*The hands move quickly if the respective

buttons are kept pressed.

3.Push the crown back into the normal position.

■ HOW TO SET THE TIME/CALENDAR

•If the stopwatch is in use, be sure to reset it

before setting the time.

1.Pull out the crown to the first click.

2.Turn the crown clockwise until the previous

day’s date appears.

3.Pull out the crown to the second click when

the second hand is at the 12 o’clock position.

The second hand will stop on the spot.

4.Turn the crown clockwise until the desired

date appears, and set the hour and minute

hands to the desired time.

5.Push the crown back into the normal position

in accordance with a time signal.

Notes:

1.While the crown is at the second click, do

not press any button. Otherwise, the

stopwatch hands will move.

*To reset them to the “0” position, refer to

“ADJUSTING THE STOPWATCH HAND

POSITION”.

2.Do not set the date between 9:00 p.m. and

1:00 a.m. Otherwise, the date may not

change properly.

*If it is necessary to set the date during that

time period, first change the time to any time

outside it, set the date and then reset the

correct time.

3.When setting the hour hand, be sure to check

that AM/PM is correctly set. The watch is so

designed that the date changes once in 24

hours.

4.When setting the minute hand, first advance

it 4 to 5 minutes ahead of the desired time

and then turn it back to the exact minute.

•The stopwatch can measure up to 60 minutes

in 1/10 second increments.

•The measured time is indicated by the small

stopwatch hands that move independently

of the center hands.

■ HOW TO USE THE STOPWATCH

✩After the measurement exceeds 1 minute,

the stopwatch 1/10-second hand stays at the

“0” position.

When the measurement is stopped, it will

move to indicate the elapsed 1/10 seconds.

Stopwatch operation

Start Stop Reset

Second

click

S t op wa t ch

mi nu t e

hand

Stopwatch 1/10-second hand

C r ow n

Stopwatch second hand

Second hand

Minute hand

C r ow n

Second click

First click

Da t e

Hour hand

Stopwatch 1/10-second hand

Stopwatch second

hand

Stopwatch

mi nu t e

hand

Minute hand

A

B

A

B

Standard measurement

A BA

✩

Product specificaties