Lorex LWB4850-C2 Handleiding

Bekijk gratis de handleiding van Lorex LWB4850-C2 (2 pagina’s), behorend tot de categorie Bewakingscamera. Deze gids werd als nuttig beoordeeld door 14 mensen en kreeg gemiddeld 4.7 sterren uit 5 reviews. Heb je een vraag over Lorex LWB4850-C2 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

HD Wire-Free Add-On Camera

LWB4800_LWB4900_QSG_EN_R1

Quick Start Guide

English Version 1.0

• HD Wire-Free Security Cameras

• Camera Mounting Kit*

• Rechargeable Power Pack*

• Camera Antenna*

• Allen Key

• Power Pack Adapter

* Per camera in multi-camera packs

Package Contents

• Read this guide carefully and keep it for future reference.

• Follow all instructions for safe use of the product and handle with care.

• Use the camera within given temperature, humidity and voltage levels

noted in the camera’s specifications.

• Do not disassemble the camera.

• Do not point the camera directly towards the sun or a source of

intense light.

• Use only the supplied regulated power supply provided with the

product or compatible accessories. Use of a non-regulated, non-

conforming power supply can damage the product and void the

warranty.

• Periodic cleaning may be required. Use a damp cloth only. Do not use

any harsh, chemical-based cleaners.

Safety Precautions

lorex.com

Optimizing Motion Detection

Customize motion detection settings to ensure motion events are being

recorded and reduce false alarms.

To optimize motion detection:

1. Launch the Lorex Cirrus

app.

2. Tap a channel in Live View to

select it.

3. Tap

, then tap Motion.

4. Configure the following as

needed:

a. Sensitivity: The amount of motion needed to trigger recording (e.g., higher

sensitivity requires less motion to trigger recording).

b. Area Selection: Not supoorted.

c. Distance Setting: Configure distance setting for motion detection. While

watching the camera’s video on your mobile device, recreate a motion event

in front of your camera. The icon will change from

towhen motion is

detected by the camera. Change the distance setting if motion detection is

being triggered by unwanted events.

NOTE: Distance will be affected by temperature.

d. Buzzer: Set the recorder to sound an alarm when motion is detected.

5. Tap Save. Repeat for other cameras on the system.

a

b

c

d

Installation Tips

• See images to the right for ideal setup. It is

recommended to place your camera at least

7ft (2.1m) above the ground and angle it slightly

downward toward the monitoring area, excluding

any busy areas (e.g., sidewalks or roadways).

• Ensure the camera image is free of obstructions

(e.g., tree branches).

• Position the camera no more than 20ft (6.1m)

away from the area you wish to monitor.

• See the “Optimizing Motion Detection” section to

customize motion settings for each camera on

your system.

• For best performance, position the camera so

that objects of interest will move from side-

to-side across the camera image, rather than

Follow the tips below for more accurate motion detection and to optimize

battery life:

moving towards or away from the camera.

• Install the camera within range of the recorder (noted in the camera’s

specifications).

• This camera is weather resistant for outdoor use (IP66 rated). Installation in a

sheltered location is recommended.

• Battery life will vary based on temperature, settings and number of events.

LWB4800 / LWB4900 SERIES

Copyright © 2019 Lorex Corporation

As our products are subject to continuous improvement, Lorex reserves the right

to modify product design, specifications and prices, without notice and without

incurring any obligation. E&OE. All rights reserved.

• For a full list of compatible recorders, visit lorex.com/compatibility.

• Not intended for submersion in water. Installation in a sheltered location

recommended.

Disclaimers

The following accessories are available for purchase. Visit lorex.com and

search for the model numbers below for details:

COLOR

Extra Power

Pack Power

Adapters

2-cell

Accessory

Power Pack

3-cell

Accessory

Power Pack

PLUS

Solar

Panel

WHITE

ACPWF1

ACBATT2

ACBATTR2

ACBATT3

ACBATTR3

ACSOL1B*

BLACK

ACPWFBK1

Available Accessories

* Compatible with select Wire-Free cameras only. Visit

lorex.com/compatibility for details.

Product specificaties