Lorex LNZ4001 Handleiding

Lorex Beveiligingscamera LNZ4001

Lees hieronder de 📖 handleiding in het Nederlandse voor Lorex LNZ4001 (2 pagina's) in de categorie Beveiligingscamera. Deze handleiding was nuttig voor 19 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/2
SETUP YOUR CAMERA FIRST
STEP 1
SET UP YOUR CAMERA ON THE
WIRELESS LOCAL NETWORK
STEP 3
DISCOVER & VIEW YOUR CAMERA ON
THE LOCAL NETWORK
STEP 2
LN Series
Quick Setup Guide
It really is that easy!
Identify Your IP Camera
BEFORE YOU START
This Network Camera is designed for easy installation.
However, before you continue, please read the following:
The Quick Start Guide refers to LNE1001, LNE3003 and LNZ4001
models and must be followed in sequence without
skipping steps.
1. When setting up the camera, use Internet Explorer only
After the initial setup, you can view the camera using Internet
Explorer (with ActiveX), Mozilla Firefox and
Safari
2. Steps 1 - 2 should to be completed when your camera is
connected wired before you can use the camera wirelessly.
3. When connecting the camera to a wireless network, consider the
following:
a. If your wireless router is not set up with wireless encryption, you
can start the installation process immediately.
b. If your wireless router is set up with the encryption, please make
sure you know the encryption key. If you do not know the
encryption key (encryption password), please refer to your
router’s manual in order to reset the key.
c. If your wireless router is set up with a different type of encryption
please refer to your router’s manual in order to change
encryption type to WEP - OPEN, WPA - PERSONAL,
WPAZ - PERSONAL.
d. The camera is compatible with Macintosh for viewing only.
Recording on Macintosh is not supported. When using
Macintosh auto discovery “Bonjour” advanced
knowledge is required. Please refer to “Setting Up Using
Macintosh” FAQ on LOREX web site www.lorextechnology.com
Skill Level
Intermediate
easy advanced
Time
under 30 minutesunder 15 minutes under 60 minutes
Hand Tools Hardware
Router
Hi Speed
over 60 minutes
Skill Level
Intermediate
easy advanced
Time
under 30 minutesunder 15 minutes under 60 minutes
Hand Tools Hardware
Router
Hi Speed
over 60 minutes
Time: 10 Minutes Hand Tools Skills - Easy
BASIC INSTALLATION GUIDE
Broadband Router and Computer are required for
local and remote monitoring (not included).
Place the base of the
camera on a flat surface
and screw on the stand.
a
Attach the screw knob to
the camera stand.
b
Attach the wireless antenna to
the back of the camera.
c
Screw the camera to the
camera stand.
d
Tighten the screw knob to
secure the camera.
e
Plug the power adaptor into the
power port of the camera. Plug the
other end to an electrical outlet.
NOTE: Make sure the LED is lit
on the front of the camera. If not,
check that all cables are properly
connected.
g
Set up Your Camera*
f
Connect the included network
cable to the rear side of the
LAN port on the bottom of the
camera. Connect the other
end of the network cable to the
router, switch, or active wall
port of your local network.
IMPORTANT
5. Reset
6. Audio IN
7. Audio OUT
8. I/O
1. Camera
2. Antenna
3. Power Adaptor Port
4. Ethernet Cable
(LAN) Port
2
1
4
3
5
3
54
2
1
6 7 8
LNE3003
LNZ4001
Skill Level
Intermediate
easy advanced
Time
under 30 minutesunder 15 minutes under 60 minutes
Hand Tools Hardware
Router
Hi Speed
over 60 minutes
Time: 10 Minutes Hand Tools
- Computer
Skills - Easy
BASIC INSTALLATION GUIDE
NOTE: This quick start guide refers to a Windows 7 & Vista™ installation.
NOTE: For initial setup, you will need Internet Explorer (on PC using
Windows Operating system only) as your default browser. Do not install
DigiConsole until Step 2 is completed.
Launching the DigiConsole Software
Before launching the program, please make sure your computer is connected
to the same local network as the camera and has access to the Internet.
The camera must be connected using the included Ethernet cable for initial
installation. It is recommended to setup the camera when your computer is
wired to the local network. If you are using the wireless connection on your
computer, please make sure you are connected to your wireless router (check
wireless name - SSID).
Congratulations! Your camera is
now set-up for local viewing
If the software runs
automatically, please
proceed to Step 2, section d.
If the pop-up window
appears, click Run
Setup.exe and continue to
Step 2, section c.
b
Double-click the camera to
launch DigiViewer in your
browser.
a
Enter admin in the username
and admin in the password
elds to access your camera.
The browser will prompt you
to install ActiveX.
b
Depending on your browser
security settings, you can use the
“remember me” check option and
the next time you will view the
same camera using this browser
it will renumber user name and
password till you restart your
computer.
Did you know?
If a security pop-up window
appears, click Unblock
and Continue to allow
DigiConsole to run.
c
NOTE: If the CD does not start
automatically, please go to “Computer”
(“My Computer” for Windows XP™ users)
and double click on the CD Drive to run
the application. Follow Step 2.
Click Find to discover Lorex
cameras on your network.
OPTION: If UPNP is enabled on your
computer open the “Network” (“My
Network Places” for Windows XP™
users) folder to view UPnP devices.
(UPNP is disabled by default in
Windows Vista™).
d
aInsert the included
DigiConsole Software CD into
your CD/DVD-ROM drive.
Local Viewing
d
If a security pop-up window
appears, click Unblock
and Continue. Click the
warning on the browser bar
and select Install ActiveX
Control. Click Unblock or
Continue in any proceeding
security pop-ups.
c
Click the warning bar (it will turn from
yellow to blue) and select Install ActiveX.
Click Install to start the
installation. Click Unblock or
Continue in any security
pop-up. (This step is required
only for rst time set-up).
Setting up Wireless Connectivity
CAMERA must be PLUGGED INTO YOUR ROUTER BEFORE STARTING THE
WIRELESS SETUP. Steps 1 - 2 should to be completed.
From DigiViewer, click
Settings and then click
Wireless. DigiViewer
automatically scans for any
wireless networks.
aClick Submit Wireless. Allow
DigiViewer a few moments
to apply your new connection
settings.
NOTE: Changing wireless
settings may require devices
to reconnect.
c
1. Click on Settings,
Preferences. Beside
“Wireless IP Address”,
there should be a populated
IP address. This means that
the wireless connection has
been connected.
2. Disconnect the network cable
from the camera.
3. Double-click the camera in
the the Windows Network
menu (Start>Network) to
launch DigiViewer in your
default browser.
NOTE: If using a Mac, use
Bonjour in Safari to auto-detect
your camera.
d
If not already enabled, select
Enabled from the Wireless
Mode drop-down menu.
From the list of available
networks, select the wireless
network for the device. If
protection/encryption is
enabled on the wireless
router, you must enter the
network password.
b
Congratulations! Your
camera is now set-up to
work Wireless.
ATTENTION: This section is applicable to wireless camera models only. The
cameras are B/G wireless devices. N wireless routers must be in “mixed B & G”
mode (not in N mode) to detect the camera.
Skill Level
Intermediate
easy advanced
Time
under 30 minutesunder 15 minutes under 60 minutes
Hand Tools Hardware
Router
Hi Speed
over 60 minutes
Time: 10 Minutes Hand Tools
- Computer
Skills - Easy
BASIC INSTALLATION GUIDE
Information in this document is subject to change without notice. As our products are
subject to continuous improvement, Lorex Technology Inc. and our subsidiaries reserve
the right to modify product design, specications and prices, without notice and without
incurring any obligation. E&OE Š 2010 LOREX. All rights reserved.
For detailed setup information, please refer to
the User’s Manual included inside the software/
support CD . For additional information, please
visit our website
www.lorextechnology.com
It’s all on the Web
LNE1001 LNE3003 LNZ4001
Enhance your security with genuine Lorex Cameras, Digital Video Recorders,
Integrated Systems and Accessories. Order whatever you need at
www.lorexcctv.com or call 1-888-42-LOREX (1-888-425-6739)
SEE HEAR PROTECT
PROTECT EVERYTHING
THAT MATTERS
Warehouse
LNP5220E, LNP5320E,
LND7220V, LNZ9320W
Of ce
LNE3003 , LNP5220E,
LND7220V
Day Care
LNE3003, LNP5220E
Convenience Store
LND7220V, LNE3003
LNP5220E, LND7220V
Restaurant
Home Of ce
LNE3003
Add wired or wireless network cameras to
expand the “Envelope of Protection” for your
business, your home and your family
Drive Way / Parking Lot Front Door
LNE3003
Nursery
LNE3003
Backyard
LNP5320E, LND7220VLNP5320E, LNB6300V
LNZ4001 LNE1001
Available to Purchase:
16-CHANNEL INTELLIGENT SURVEILLANCE SOFTWARE
SOLUTION
LDP1601
www.lorextechnology.com
* camera mounting options may vary by model.
LN Series_QSG_EN_R2
The iPhone, iPod Touch and iPad are capable of remotely viewing
the LN series cameras. To do this you will need to download an
App onto your device.
• iPhone, iPod Touch Users must download the Lorex Live 2 App
from the App store.
• iPad users must download the Lorex iMobile App from the App
store.
LOREX EASY CONNECT INTERNET
REMOTE VIEWING - BASIC
STEP 4A REMOTE VIEWING INSTALLATION GUIDE
Skill Level
Intermediate
easy advanced
Time
under 30 minutesunder 15 minutes under 60 minutes
Hand Tools Hardware
Router
Hi Speed
over 60 minutes
Time: 20 Minutes Skills - Easy
Hardware
- PC
Skill Level
Intermediate
easy advanced
Time
under 30 minutesunder 15 minutes under 60 minutes
Hand Tools Hardware
Router
Hi Speed
over 60 minutes
Congratulations! Now that you have a Yoics account set up you can log in to
http://lorex.yoics.com to remotely view your cameras from anywhere in the world
using Internet Explorer web browser (Windows operating system only).
ON YOUR PC
STEP 4B
LOREX EASY CONNECT INTERNET REMOTE
MONITORING ADVANCED
(AUTO PORT FORWARD WIZARD)
CONTINUED
Congratulations! You have completed 4B successfully. Your camera is now set-up for
remote viewing on any PC. You can now log into your Lorex account from anywhere in
the world with your DDNS URL address.
CONTINUED
1. For PRODUCT LICENSE
select the LNE-LNZ
Series option from the
drop down menu.
2. For PRODUCT CODE
enter the Monitor’s MAC
address (recorded in
Step 4B-1).
3. For URL REQUEST enter
a unique URL name (e.g.
tomsmith). NOTE: URL
name should not be more
than 15 characters.
Complete New Account Information:
12
3
8
7Create Account:
Create Account
Congure DDNS in Digiviewer
STEP 4B STEP 4B
6
Open your web browser (Internet Explorer by default) and enter
http://www.lorexddns.net in the address bar.
DDNS (Dynamic Domain Name System) Set-up:
http://www.lorexddns.net
LOREX EASY CONNECT INTERNET REMOTE
MONITORING ADVANCED
LOREX EASY CONNECT INTERNET REMOTE
MONITORING ADVANCED
OPTIONAL DDNS DDNS
9
An automated REGISTRATION CONFIRMATION EMAIL will be
sent to your email. Print and Save this conrmation. You will
need this information to access your System remotely.
Registration Email:
Service Provider: dns1.lorexddns.net
Domain Name: tomsmith.lorexddns.net
User ID: tomsmith
Password: (your password) EXAMPLE
ON YOUR PC ON YOUR PC ON YOUR PC & IP CAMERA
1. Open DigiViewer:
• Open directly in your web browser
using your device’s IP address
(refer to Step 4B-1).)
OR
• From DigiConsole, from the Find
menu, right-click the device and
select Open Device in Browser
2. Enter the IP Camera’s user name
(admin) and password (admin) to
login to the device.
3. From the DigiViewer main window,
click Settings and then click
Remote Access.
4. Under Dynamic DNS, select Enable
Lorex Dynamic DNS Service.
5. Enter the domain name
(e.g. tomsmith.lorexddns.net), you
only need to enter tomsmith in the
text eld and your user name from the
DDNS conrmation email. DigiViewer
will automatically update with your
newly entered DDNS information.
6. Click the Submit Remote button to
complete the setup.
7. Click System Log and scroll down to check if your DDNS Setup was
successful.
8. Click Surveillance to return to the main window to ensure the
changes have been implemented.
Registering with Yoics
Router port forwarding is not required
2
NOTE: There is no “www” in
front of the address. The camera
must be connected to your local
network router for Yoics to
automatically detect the system.
1. From DigiViewer, click Settings and then
click Remote Access.
2. Under Yoics Instant Networking, click
Register this Camera. The Lorex Remote
Viewing page opens
http://lorex.yoics.com
3. Enter your personal information
in the necessary elds and create
an account.
Registering your Camera
3
1. A pop-up window opens and
informs you that your camera has
been detected. Click CONTINUE
in the registration screen to enable
Yoics Easy Connect.
2. You can rename your camera (e.g.
myofce). Click REGISTER NOW.
After the registration your IP
camera will appear on the left side
bar under My Stuff/Cameras
NOTE: This service is provided free
of charge. You do not have to click
the Upgrade Now button to use the
Remote Viewer service.
Connect to your IP Camera
4
1. Double click your IP Camera to
view live camera images. Double
click on the camera’s name to view
the feed.
Your IP camera is designed to work with Yoics easy-connect remote
access. Yoics remote viewing allows you to access your camera from a
remote location without needing to congure your router.
Using Yoics
NOTE: Decide whether you want your IP camera to connect to Yoics in
wired or wireless mode. If you want your camera to operate wirelessly you
must connect to your camera in wireless mode before creating a Yoics
account. For details, see “Setting Up Wireless Connectivity” in the User’s
Manual.
1
NOTE: If you have not already registered for free Lorex DDNS Service,
click Register with DDNS Service at the bottom of the remote access
window to go to the Lorex DDNS website.
10
NOTE: You may have to manually save your
router settings after the software makes
the required changes to your router.
Step 3: Update the Router Settings
1. Click the Update Router button. The program
begins updating the router settings. This may
take 20 - 30 seconds.
2. Close the update window when the update
nishes.
Step 4: Test your Connection
1. Click the Test Your Connection button.
Your system’s default browser opens and
connects to your Lorex device.
2. Enter the IP Camera’s user name (admin)
and password (admin) to login to the
device.
NOTE: Ensure that Internet Explorer is
your system’s default internet browser.
Manual Port Forward:
5
If you were unable to port-forward your router
automatically using the wizard, you will need to do so
manually.
All routers are different. To port forward your router, please refer to
your router’s user manual.
An example of a port forwarding screen is shown for illustration
purposes.
Ports: 80 (Web Port), 554 (Video Port (RTSP)
80
554
12
12
554
System
System 80
EXAMPLE
REMOTE VIEWING USING iPHONE™,
iPOD TOUCH™ & iPAD™
1. iPhone/iPod Touch users: Must have OS version 3.1.2 or
greater.
2. iPad users: Must run OS version 3.2 or greater.
System Requirements:
Downloading the App:
You must download the application from the Apple App Store.
NOTE: You must create an App Store account before you can
download content. A valid credit card is required to create an
account, however the download of the above Apps is free of
charge.
• Launch the App Store application from your device.
• iPod, iPod Touch users: Search for Lorex Live 2
• iPad users: Search for Lorex iMobile.
Auto Port Forward Wizard
2
The Lorex Auto Port Forwarding Wizard is a software that automates
router port forwarding.
You must have the following before you congure the software:
1. Your router’s model and version numbers
2. Your router’s user name and password
3. Your Lorex device’s IP address
4. Your Lorex device’s port numbers that require port forwarding
Step 1: Populate the Router Database
4The Auto Port Forwarding Wizard
automatically populates a list of current
routers, and detects the number of
connected routers.
1. Click the Next button after the software
detects your router conguration.
Step 2: Enter your Router Settings
1. Under the Router drop-down list, select
the model of your router OR click the
Search button to enter the name of your
router model.
2. Under Router IP, click the Detect Router IP button. The router’s IP populates
in the blank eld.
3. Under Username and Password, enter the router’s username and password.
4. Under IP, enter the IP address of your Lorex device (refer to Step 4B-1).
5. Under Port, enter the port number(s) that require forwarding (Web Port: 80,
Video Port (RTSP): 554)
6. Click Next to continue.
80
NOTE: Click the Auto Detect button if you have a Linksys or Netgear
router (works with most models).
NOTE: Ensure you select the proper model
and rmware number of the router.
554
1. From the DigiConsole main viewing window,
click on LOREX EASY CONNECT WIZARD
and follow the instructions on the website to
register, download and launch the Wizard.
Installation
3
For detailed setup information, please refer to the
User Manual included inside the software CD.
Enter the IP Camera’s user name
(admin) and password (admin) to
login to the device.
1Locate your IP & MAC Addresses:
Record the IP and MAC Addresses in the section below:
IP ADDRESS : . . .
MAC ADDRESS : : : : : :
(Required for DDNS registration)
1. Run DigiConsole from the included
software CD.
2. From the main menu, click Find to open the
list of devices. DigiConsole automatically
locates all available Internet cameras on
the network.
3. Locate the IP and MAC addresses next to
the device icon.
OPTIONAL
Ports (by default): 80 (Web Port), 554 (Video Port (RTSP)
Step 4B-1
LN Series_QSG_EN_R2

Product specificaties

Merk: Lorex
Categorie: Beveiligingscamera
Model: LNZ4001

Heb je hulp nodig?

Als je hulp nodig hebt met Lorex LNZ4001 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden


Handleiding Beveiligingscamera Lorex

Lorex

Lorex LNZ4001 Handleiding

4 Juli 2023
Lorex

Lorex LNE1001 Handleiding

4 Juli 2023

Handleiding Beveiligingscamera

Nieuwste handleidingen voor Beveiligingscamera

Abus

Abus IPCB42510B Handleiding

28 Oktober 2023
Vivotek

Vivotek FE8171V Supreme Handleiding

7 Oktober 2023
Vivotek

Vivotek MD7530 Dome Handleiding

7 Oktober 2023
Vivotek

Vivotek IP8362 Supreme Handleiding

7 Oktober 2023
Vivotek

Vivotek NR8401 NVR Handleiding

7 Oktober 2023
Vivotek

Vivotek ST2403 Software Handleiding

7 Oktober 2023
Vivotek

Vivotek PZ8111W PTZ Handleiding

7 Oktober 2023
Vivotek

Vivotek ST3402 Handleiding

7 Oktober 2023
Vivotek

Vivotek SD8363E Supreme Handleiding

7 Oktober 2023
Vivotek

Vivotek RX7101 NVR Handleiding

7 Oktober 2023