Living & Co SL595B Handleiding

Bekijk gratis de handleiding van Living & Co SL595B (1 pagina’s), behorend tot de categorie Stofzuiger. Deze gids werd als nuttig beoordeeld door 2 mensen en kreeg gemiddeld 4.6 sterren uit 8 reviews. Heb je een vraag over Living & Co SL595B of wil je andere gebruikers van dit product iets vragen? Stel een vraag

MODEL :SL595B

CONTENTS:

Product Overview

2

Description

2

Technical Specifications3

Accessories

3

Important safeguards

4-5

Safety warning

5

Battery Charging

5

Assembly and Operation

6-7

Description of Floor Vacuum Head

7

Emptying the dust collection container

7-8

Cleaning the HEPA filter

8-9

Cleaning the motorized power head

9

Maintenance

9

Troubleshooting

10

Responsible disposal

11

Warranty

11

PRODUCT OVERVIEW:

K

A

B

C

D

F

G

H / I

E

J

DESCRIPTION

G.Filter cover

H.Small brush attachment

I.Nozzle attachment

J.Mounting screws

K.Wall bracket

L.Release actuator for dust canister

A.On/Off Switch

B.Handle

C.Vacuum Rod

D.Dust collection compartment

E.Floor vacuum head

F.HEPA filter

TECHNICAL SPECIFICATIONS

Charger

Input ：100-240V~50/60Hz 0.5A

Rated voltage：18.5V ---

Output ：22V---500mA

Vacuum

Modelno. ：SL595

Rated power

：115W

Operation time: 20-30 min

Charging time：5-6H

Battery：Li-ion 2200mAh

ACCESSORIES

Power head

Vacuum

rod

2 in 1 nozzle

Charger

IMPORTANT SAFEGUARDS

Read this manual thoroughly before first use, even if you are familiar with this type of product.

The safety precautions enclosed reduce the risk of fire, electric shock and injury when correctly

adhered to:

READ ALL INSTRUCTIONS BEFORE USING YOUR VACUUM CLEANER AND KEEP THIS

MANUAL FOR FUTURE REFERENCE.

Always follow basic safety precautions and accident prevention measures when using an

electrical appliance including the following;

1.Before using the appliance, check that the mains supply voltage corresponds to the voltage

shown on the rating plate.

2.Always remove the plug from the power socket when the appliance is not in use and before

carrying out any cleaning or maintenance operations.

3.Never use methylated spirits or other solvents to clean the appliance.

4.Do not use the appliance to vacuum up liquids or damp items.

5.This appliance is designed for attended use only, never leave the appliance unattended whenit

is switched on.

6.Keep the appliance out of reach from children or the infirm.

7.This appliance is intended for domestic use only. Use as described in this instruction booklet.

8.Do not operate the appliance if it has been dropped / damaged or appears to be faulty.

9.Do not handle the supply plug or the appliance with wet hands.

10.

Do not pull or carry by the supply cord, or pull cord around sharp edges or corners.

11.

If the supply cord is damaged, it must be

replaced by the manufactureror its service

agentor a similarly qualified person in order to avoid a hazard.

12.

This appliance canbe usedby childrenaged from 8 years and above and persons with

reduced physical, sensory or mental capabilities or lack of experience and knowledge if

they have been given supervision or instruction concerning use of the appliance in

a safe

way and understand the hazards involved.

13.Childrenshallnot play with the appliance. Cleaning and user maintenance shall not be

made by children without supervision.

14.Keep the appliance and its cord out of reach of children less than 8 years.

15.Do not remove the plug from the socket by pulling the cable or the appliance itself.

16.Donot use theappliance to vacuum anything that is burning or smoking such as matches,

cigarette ends and hot ash.

17.Do not use the appliance on wet surfaces.

18.Do not obstruct the air intake or outlet vent.

19.Do not use the appliance to vacuum needles, drawing pins or strings.

20.Not intended for outdoor use.

21.Switch off the appliance using the on/off switch and the wall socket switch before removing

the plug from the electrical socket outlet.

22.Keep end of hose, rods and other openings away from your face and body.

23.Do not use the vacuum cleaner without the dust collection container or filters in place.

24.Keep hair,loose clothing and all parts of the body away from openings and moving parts.

Do not run the appliance Do not obstruct the air intake

over the power cable.or outlet vents.

SAFETY WARNINGS!

Do not remove the plug from

the socket by pulling the cable

of the appliance. Hold the plug

instead.

Do not use the appliance onDo not use the appliance toDo not use the appliance to

wet surfaces.vacuum matches,to vacuum sharp objects such

cigarette ends or hot ash.as needles or drawing pins

BATTERY CHARGING:

1.Please make sure that product is powered off, connect the charger to the mains supply

socket, switch the socket on and then connect the charge lead output connector into the power

inlet on the right side of the cleaner body.

2.Three charging lights flash on in sequence to indicate charging is in process. When charging

is complete, all 3 lights stay illuminated for 3 minutes and then all switch off.Note, charging

time will vary depending on the status of the battery prior to connection, however if completely

flat then a charge time of around 4 – 5 hours will be required.We recommend charging fully

and then fully discharging for the initial 1 – 3 times of first use.

WARNING: -Do not turn on the product and Do not try removing battery during it’s charging!

-Only charge when ambient is within 10 – 40 degrees Celcius, charging outside

of this may damage the battery.

1.Ensure battery is suitably charged, refer ‘Battery Charging’ section above for further

information

2.Insert one end of the vacuum rod onto the inlet nozzle of the main vacuum body (refer

image below).

3.Insert the floor vacuum head attachment nozzle onto the

opposite end of the rod.

4.As an alternative to using the floor vacuum head, the 2-in-1 nozzle attachment can be

used (ideal for furniture / shelves etc).

5.Ensure the dust collection container is fitted correctly to the main body (refer ‘Dust

collection container removal and filter cleaning’ section).

6.Whilst holding the appliance by the handle, press the power button on the main body to

start appliance.

7.Pressing the power (ON/OFF) button once activates low power, pressing again switches

the vacuum off. Press the (MAX)button to activate high power.

8.When battery is running out of power, the Power light on body keeps flashing on until the

product turns itself off. Follow Battery Charging section for further information.

9.The motorized vacuum power head operates at high speed. To avoid damage to

cleaning surface, do not leave this in the same spot for too long.

10.The motorized vacuum power head has an over-heating protection function which can

cut off the power to nozzle when blockage or temporary jamming occurs. If this occurs,

please switch off the product, unblock and clean the nozzle. Do not use the product until

it cools down.

11.When you have finished using the appliance, push the power button again to switch off.

12.Check dust collection container contents and empty if required, neverallowthecontainer

to exceed the maximum mark.

13.Store the product for later use in a dry, well ventilated location.

Emptying the dust collection container

1.Switch

the unit off and remove the vacuum rod from the body.

2.Whilst positioning the underside of the collection contain (refer image) over a rubbish bin,

push therelease cliplever downwards onthecollectioncontainerbody, whichwillallowthe

hinged lower cover to open.

3). Gently tap the collection container body to allow contents to fall out, once complete,close

the hinged cover so that it locks back into position.

CLEANING THE HEPA FILTER

The filter should be cleaned regularly or after heavy use. To access the filter, follow

the instructions for ‘Emptying the dust collection container’ up to instruction 2), then

proceed as follows;

1). With one hand, reach in to hold the

filter cover and rotate anti-clockwise to allow the

filter cover to unlock and release, this can now be removed from the collection container.

2). Wipe any remaining surface dust / dirt from the filter cover.

3). With the filter cover removed, the Hepa filter can now be removed from within the machine:

4). Remove the Hepa filter from the machine by rotating the filter body anti clock-wise

to release, then pull away from the machine.

5). Wash the hepa filter under running water to remove dust deposits and dirt.

6). Shake out all excess water, and leave to fully dry (naturally) for at least 24 hours

before placing back into the machine.

WARNING: Failure to follow this instruction will

compromise safety and reduce the effectiveness

of the vacuum. The filter cannot be cleaned in the washing machine.

7). Once completely dry, re-insert the filter back into the machine by aligning the locating

ridges and rotating clockwise to lock in position.

5). Re-insert the filter cover to the collection container and rotate clock-wise to lock in position.

6). Close the lower hinged cover until it ‘clicks’ to lock in position.

CLEANING THE MOTORISED POWER HEAD

1). Turn off the power and release the motorised power head.

2). Turn the button on the bottom of nozzle by using a flat object such as a coin to rotate to

the “unlock” position.

3). Lift up the roller brush and remove.

4). Along the

groove on the roller, remove twirled hair or blockage by scissors or knife.

5). Place back the cleaned roller and turn the button back to the “lock” position.

MAINTENANCE

It is importantthat the dust collection container isregularly emptied and that the inlet / outlet

filters are regularly cleaned – follow the section ‘Emptying the dust collection container and filter

removal / cleaning’ earlier in this manual.

If the body of the appliance requires cleaning, use a dry cloth. Donot use abrasive scouring

pads or cleaning products.

appliance is in the on position.

powerbutton to the on position.

Suction power

becomes weak

1.Check if the vacuum rod or floor

vacuum head is clogged or damaged.

2.Check if the dust collection

container isfull.

3.Check if the filters are clogged.

1.Remove the obstruction and clean any

dust build up.

2.Empty the dust collection container.

3.Remove and clean the filters then

reassemble.

Operating time

seems shorter

than previous

1.Battery not fully charged

2.Battery aging

1.Follow charging instructions ensure

battery is fully discharged (flat) and then

leave to charge uninterrupted for full

recommended time (4-5 hours).

2.Afteran extended period ofuse

(outs

ideof warranty period) the

effectiveness of thebattery will reduce as

the product reachesend of life.

Responsible disposal

At the end of its working life, do not throw this appliance out with your household rubbish. Electrical and

electronic products contain substances that can have a detrimental effect on the environment and human

health if disposed of inappropriately. Observe any local regulations regarding the disposal of electrical

consumer goods and dispose of it appropriately for recycling. Contact your local authorities for advice on

recycling facilities in your area.

SL595B IM (convert) CV 23 06 2020说明书 2020.6.29

1

7911

352

6810

4

INSTRUCTION MANUAL

CORDLESS STICK VACUUM CLEANER

ASSEMBLY AND OPERATION

Instructions for use:

Floor Vacuum Head

The floor vacuum head can be used on bare floors (wood / tile / vinyl / concrete etc). To

assist with the movement and function of the vacuum head, the underside includes a motor

driven brush.

Problem

Possible CausePossible Solution

Vacuum cleaner

does not work

1.Battery is flat

2.Check if the power button of the

1.Follow the charging instructions.

2.Press the vacuum cleaner

TROUBLESHOOTING

Please check the following details before you have your appliance repaired by an authorised

servicing agent

L

2

2

Wall Mounting Bracket

1.The wall mounting bracket provided can be used to support the vacuum when not in

operation, along with support of the small brush / nozzle attachment.

2.Find a suitable wall location clear of obstacles / doors. Ensure well clear from heating

sources (such as oven / wall heaters / wood burning stoves etc). Do not locate within a damp

or wet room such as bathrooms / laundry.

3.Once a suitable location has been identified, place the bracket on the wall at a height just

above the length of the vacuum. Use the screws provided to secure to the wall but ensure

they will screw into a solid material such as wood (ie position in front of a wall stud / nog). If

you need to secure to a Gib or plasterboard wall you will need to obtain suitable wall anchor

plugs (available from a hardware shop).

4). Once secured to the wall, place the vacuum and attachment as shown below.

Wall mounting bracket and screws

CLEANING THE HEPA FILTER : CONTINUED

Product specificaties