Livex Lighting Adams 27378-01 Handleiding
Livex Lighting
Lamp
Adams 27378-01
Bekijk gratis de handleiding van Livex Lighting Adams 27378-01 (1 pagina’s), behorend tot de categorie Lamp. Deze gids werd als nuttig beoordeeld door 2 mensen en kreeg gemiddeld 4.6 sterren uit 1.5 reviews. Heb je een vraag over Livex Lighting Adams 27378-01 of wil je andere gebruikers van dit product iets vragen? Stel een vraag
Pagina 1/1
ASSEMBLING & INSTALLATION INSTRUCTIONS
The drawing shown may not exactly match the product enclosed.
However, the installation instructions do apply to this product.
2035 27377 2037 27378
WARNING! SHUT POWER OFF AT FUSE OR CIRCUIT BREAKER.
ATTENTION! COUPER LE COURANT AU FUSIBLE OU UN DISJONCTEUR.
ASSEMBLING THE FIXTURE (Fig.2)
1. Raise the talon(B) to the bottom of lamp body(D), aligning holes with the thread
holes, lock it securely with the screws(A). Slip the threadlike bolt of the lamp
body(D) at side, open the window. Put the candle sleeve(C) over the lamp holder.
2. Install the light bulbs(not included) in accordance with the fixture specifications.
NOTE: DO NOT EXCEED THE SPECIFIED WATTAGE! Close the window.
HANGING THE FIXTURE (Fig.1)
1. Shut off the power at the circuit breaker and remove old fixture from ceiling,
including the old crossbar. Carefully unpack new fixture and lay all the parts on a
clear surface.
2. Attach the mounting screw part way into the side hole of the crossbar, then lock it
securely with hex nut until becom e junction box using ing. Attach the crossbar to th
two box screws as shown. The side of the crossbar marked “GND” must face
out.
3. Using proper chain pliers to open one end link of the chain provided and connect
to the fixture loop. Close the link.
3. By measuring, determine correct number of links needed for proper hanging
height. Using proper chain pliers disconnect and discard remaining chain.
4. Lace the fixture wires through the chain.
5. Open the other end link of the chain and hang the fixture on the loop at the ceiling.
Close the link.
6. Feed the fixture wires through the loop of the canopy and pull until taut.
7. Slide canopy up flush to ceiling, lock it securely with ball nuts.
CONNECTING THE WIRES (Fig.3)
1. Take the black wire from the ceiling junction box and the smooth wire leg from the
fixture and twist bare ends together. Twist wire connector onto end of wire until
snug.
2. Repeat same process with white junction box wire and ribbed wire leg of fixture
wire. NOTE: Twist wires together in the same direction you twist the wire
connector onto wires.
3. If your junction box has a grounding wire (green or bare copper), attach this wire
and the bare copper wire from the fixture together as step 1.If junction box has no
ground wire, attach the bare copper fixture wire to the green ground screw on the
crossbar.
4. Tuck these wire connections neatly into the ceiling outlet box and then raise the
canopy all the way to the ceiling, lock it securely with ball nuts.
Your installation is now complete. Return power to the junction box and test the
fixture.
A
B
C
D
FIXTURE
WIRES
Black or
Smooth
HOUSE
WIRES
Black(Hot)
FIXTURE
WIRES
White or
Ribbed
FIXTURE
WIRES
Bare
Copper
(Ground)
HOUSE
WIRES
White
(Neutral)
HOUSE
WIRES
Green or Bare
Copper(Ground)
Thank you for purchasing a LIVEX product.
Need assistance with parts or assembly? Please call customer service at: 800-761-8056
Or visit us on-line at: WWW.LIVEXLIGHTING.COM
©COPYRIGHT ALL RIGHTS RESERVED.LIVEX LIGHTING,INC. DOC20221202035
FIG.3
FIG.1FIG. 2
Product specificaties
| Merk: | Livex Lighting |
| Categorie: | Lamp |
| Model: | Adams 27378-01 |
Heb je hulp nodig?
Als je hulp nodig hebt met Livex Lighting Adams 27378-01 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Lamp Livex Lighting
4 Mei 2025
11 December 2024
Handleiding Lamp
- Flair
- Massive
- Osram
- Craftmade
- Konig & Meyer
- BenQ
- Lirio By Philips
- Olight
- Gembird
- Topeak
- Luxform
- Neewer
- Ridem
- Theben
- Cotech
Nieuwste handleidingen voor Lamp
16 Juni 2025
16 Juni 2025
16 Juni 2025
16 Juni 2025
16 Juni 2025
16 Juni 2025
15 Juni 2025
15 Juni 2025
15 Juni 2025
15 Juni 2025