Lindy 42340 Handleiding

Bekijk gratis de handleiding van Lindy 42340 (3 pagina’s), behorend tot de categorie Csavaros gép. Deze gids werd als nuttig beoordeeld door 23 mensen en kreeg gemiddeld 4.6 sterren uit 5 reviews. Heb je een vraag over Lindy 42340 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

KVM Switch Compact USB 2.0 Audio

Installation Guide English

Installationsanleitung Deutsch

Manuel Utilisateur Français

Manuale d’uso Italiano

© LINDY – 2nd EDITION (September 2013)

No.

4234

0

–

HDMI

No. 42341 – DVI-D

No. 42342 – VGA

No. 42343 – DisplayPort

www.LINDY.com

For Home and Oce Use

Tested to Comply with

FCC Standards

Specication E n g l is h

•USB 2.0 compliant, supports USB 2.0 hubs and device sharing

•Port switching via button, software and keyboard hotkey switching

•2 System Cables connected to the switch

No. 42340 – Interfaces: HDMI, USB 2.0, Audio out & Microphone

HDMI up to 1920x1080, HDCP & 3D compliant, with HDMI Audio

No. 42341 – Interfaces: DVI, USB 2.0, Audio out & Microphone

DVI-D Single Link: up to 1920x1200, HDCP compliant – not for connec-

tion to HDMI ports of graphic cards or PC/notebook, HDMI and Deep

Colour are not supported!

No. 42342 – Interfaces: VGA, USB 2.0, Audio out & Microphone

No. 42343 – Interfaces: DisplayPort, USB 2.0, Audio out & Microphone

Installation E n g l is h

1. Install the software (CD) on a PC “Software Installation for Windows”.

To install on Mac OS, copy the file (*.pkg format) to the local hard

disk and install it from there.

2. This will install the software on your computer and create some new

icons in the Windows taskbar or in the Mac Dock. They will look like

one of the icons shown below.

3.

No live connection or KVM switch detected

Port 1computer is displayed and selected

Port 2 computer is displayed and selected

4. Connect your keyboard, mouse, monitor and audio devices to the

KVM switch.

5. If required, you may use a USB hub to connect more than 2 USB

devices, to do this please use a self powered USB hub.

6. Connect the system cables directly to your computers. Extension or

adapter cables may NOT be supported at high video resolutions.

Operation & Port Switching E n gl i s h

There are three methods to toggle between the computers. After switching

please allow the computer a few seconds to load all USB drivers before

you can use the system.

1. Switch Button

The Switch Button is a wired remote control. Press the button to toggle

between the two computers.

2. KVM Switching Software (Windows & Mac OS)

For KVM Switching Software please refer to installation section.

Right clicking the icon opens the port switching menu.

Double clicking the icon opens the conguration menu. Using this

menu you may bind the audio ports to one computer and you may en-

able the beeper.

Windows OS Mac OS

Switching Menu Conguration Menu Switching Menu Conguration Menu

3. Keyboard Hotkey Switching (Windows & Mac OS)

Each keystroke hotkey sequence must be pressed within two seconds.

It is not possible to switch to a port with no active computer attached.

For Windows, the following key sequence for switching is preset:

“Scroll Lock + Scroll Lock”. Additional hotkeys like "CTRL ALT + *" can

be congured via the Conguration menu as described above.

For Mac, please dene the hotkeys via the Conguration menu as de-

scribed above.

Product specificaties