Lincoln Electric POWER MIG 262 Handleiding
Lincoln Electric
Lasapparaat
POWER MIG 262
Bekijk gratis de handleiding van Lincoln Electric POWER MIG 262 (36 pagina’s), behorend tot de categorie Lasapparaat. Deze gids werd als nuttig beoordeeld door 4 mensen en kreeg gemiddeld 4.4 sterren uit 2.5 reviews. Heb je een vraag over Lincoln Electric POWER MIG 262 of wil je andere gebruikers van dit product iets vragen? Stel een vraag
Pagina 1/36
Operator’s Manual
POWER MIG
®
262
Register your machine:
www.lincolnelectric.com/register
Authorized Service and Distributor Locator:
www.lincolnelectric.com/locator
IM10715-A | Issue Date Mar - 25
© Lincoln Global, Inc. All Rights Reserved.
For use with machines having Code Numbers:
13727
Save for future reference
Date Purchased
Code: (ex: 10859)
Serial: (ex: U1060512345)
THANK YOU FOR SELECTING
A QUALITY PRODUCT BY
LINCOLN ELEC TRIC.
1-&"4&&9".*/&$"350/"/%&26*1.&/5'03
%"."(&*..&%*"5&-:
When this equipment is shipped, title passes to the purchaser
upon receipt by the carrier. Consequently, claims for material
damaged in shipment must be made by the purchaser against the
transportation company at the time the shipment is received.
4"'&5:%&1&/%40/:06
Lincoln arc welding and cutting equipment is designed and built
with safety in mind. However, your overall safety can be increased
by proper installation ... and thoughtful operation on your part.
DO NOT INSTALL, OPERATE OR REPAIR THIS EQUIPMENT
WITHOUT READING THIS MANUAL AND THE SAFETY
PRECAUTIONS CONTAINED THROUGHOUT. And, most importantly,
think before you act and be careful.
This statement appears where the information must be followed
exactly to avoid serious personal injury or loss of life.
This statement appears where the information must be followed
to avoid minor personal injury or damage to this equipment.
,&&1:063)&"%0650'5)&'6.&4
DON’T get too close to the arc.
Use corrective lenses if necessary
to stay a reasonable distance
away from the arc.
READ and obey the Safety Data
Sheet (SDS) and the warning label
that appears on all containers of
welding materials.
USE ENOUGH VENTILATION or
exhaust at the arc, or both, to
keep the fumes and gases from
your breathing zone and the general area.
IN A LARGE ROOM OR OUTDOORS, natural ventilation may be
adequate if you keep your head out of the fumes (See below).
USE NATURAL DRAFTS or fans to keep the fumes away
from your face.
If you de velop unusual symptoms, see your supervisor.
Perhaps the welding atmosphere and ventilation system
should be checked.
8&"3$033&$5&:&&"3
#0%:1305&$5*0/
PROTECT your eyes and face with welding helmet
properly fitted and with proper grade of filter plate
(See ANSI Z49.1).
PROTECT your body from welding spatter and arc
flash with protective clothing including woolen
clothing, flame-proof apron and gloves, leather
leggings, and high boots.
PROTECT others from splatter, flash, and glare
with protective screens or barriers.
IN SOME AREAS, protection from noise may be appropriate.
BE SURE protective equipment is in good condition.
Also, wear safety glasses in work area
AT ALL TIMES.
SPECIAL SITUATIONS
DO NOT WELD OR CUT containers or materials which previously
had been in contact with hazardous substances unless they are
properly cleaned. This is extremely dangerous.
DO NOT WELD OR CUT painted or plated parts unless special
precautions with ventilation have been taken. They can release
highly toxic fumes or gases.
Additional precautionary measures
PROTECT compressed gas cylinders from excessive heat,
mechanical shocks, and arcs; fasten cylinders so they cannot fall.
BE SURE cylinders are never grounded or part of an
electrical circuit.
REMOVE all potential fire hazards from welding area.
ALWAYS HAVE FIRE FIGHTING EQUIPMENT READY FOR
IMMEDIATE USE AND KNOW HOW TO USE IT.
:$51,1*
&$87,21
6DIHW\RI
Product specificaties
| Merk: | Lincoln Electric |
| Categorie: | Lasapparaat |
| Model: | POWER MIG 262 |
Heb je hulp nodig?
Als je hulp nodig hebt met Lincoln Electric POWER MIG 262 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Lasapparaat Lincoln Electric
14 Juni 2025
14 Juni 2025
14 Juni 2025
9 December 2024
9 December 2024
9 December 2024
9 December 2024
17 November 2024
13 November 2024
13 November 2024
Handleiding Lasapparaat
- Weller
- Gys
- THUN
- Amico Power
- MSW
- Workzone
- Einhell
- Ozito
- Herkules
- Ferm
- Anova
- Draper
- Powerplus
- Stamos
- UNIMIG
Nieuwste handleidingen voor Lasapparaat
6 Juni 2025
6 Juni 2025
6 Juni 2025
5 Juni 2025
4 Juni 2025
3 Juni 2025
3 Juni 2025
2 Juni 2025
2 Juni 2025
2 Juni 2025