Lincoln Electric Cool Arc 47 Handleiding

Lincoln Electric Niet gecategoriseerd Cool Arc 47

Lees hieronder de 📖 handleiding in het Nederlandse voor Lincoln Electric Cool Arc 47 (19 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 26 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/19

IM3050

05/2016

REV07

COOL ARC

OPERATOR’S MANUAL

ENGLISH

THE LINCOLN ELECTRIC COMPANY

22801 St. Clair Avenue Cleveland, OH 44117-1199 U.S.A. ● ● ●

Phone: +1.216.481.8100 www.lincolnelectric.com●

English I English

12/05

THANKS! For having chosen the QUALITY of Lincoln Electric products.

• Please Examine Package and Equipment for Damage. Claims for material damaged in shipment must be notified

immediately to the dealer.

• For future reference record in the table below your equipment identification information. Model Name, Code & Serial

Number can be found on the machine rating plate.

Model Name:

………………………………………………………………………………………………………………………………………….

Code & Serial Number:

………………………………………………………………….. …………………………………………………………………..

Date & Where Purchased

…………………………………………………………………. …………………………………………………………………..

ENGLISH INDEX

Safety .................................................................................................................................................................................. 1

Introduction ......................................................................................................................................................................... 4

Unpacking the COOL ARC

47 ........................................................................................................................................... 4

Installation on Power Source ............................................................................................................................................... 4

Installation and Operator Instructions .................................................................................................................................. 5

Electromagnetic Compatibility (EMC) ................................................................................................................................ 10

Technical Specifications .................................................................................................................................................... 11

WEEE................................................................................................................................................................................ 12

Spare Parts ....................................................................................................................................................................... 12

Electrical Schematic .......................................................................................................................................................... 13

English I English

COOL ARC

THANK YOU FOR SELECTING

A QUALITY PRODUCT BY

LINCOLN ELECTRIC.

PLEASE EXAMINE CARTON AND EQUIPMENT FOR

DAMAGE IMMEDIATELY

When this equipment is shipped, title passes to the

purchaser upon receipt by the carrier. Consequently,

Claims for material damaged in shipment must be made

by the purchaser against the transportation company at

the time the shipment is received.

SAFETY DEPENDS ON YOU

Lincoln arc welding and cutting equipment is designed

and built with safety in mind. However, your overall

safety can be increased by proper installation ... and

thoughtful operation on your part. DO NOT INSTALL,

OPERATE OR REPAIR THIS EQUIPMENT WITHOUT

READING THIS MANUAL AND THE SAFETY

PRECAUTIONS CONTAINED THROUGHOUT.

And, most importantly, think before you act and be

careful.

WARNING

This statement appears where the information must be

followed exactly to avoid serious personal injury or loss

of life.

CAUTION

This statement appears where the information must be

followed to avoid minor personal injury or damage to this

equipment.

KEEP YOUR HEAD OUT OF THE FUMES.

DON’T get too close to the arc.

Use corrective lenses if

necessary to stay a reasonable

distance away from the arc.

READ and obey the Material

Safety Data Sheet (MSDS) and

the warning label that appears on

all containers of welding

materials.

USE ENOUGH VENTILATION or exhaust at the arc, or

both, to keep the fumes and gases from your breathing

zone and the general area.

IN A LARGE ROOM OR OUTDOORS, natural

ventilation may be adequate if you keep your head out of

the fumes (See below).

USE NATURAL DRAFTS or fans to keep the fumes

away from your face.

If you develop unusual symptoms, see your supervisor.

Perhaps the welding atmosphere and ventilation system

should be checked.

WEAR CORRECT EYE, EAR & BODY PROTECTION

PROTECT your eyes and face with

welding helmet properly fitted and with

proper grade of filter plate (See ANSI

Z49.1).

PROTECT your body from welding

spatter and arc flash with protective

clothing including woolen clothing, flame-

proof apron and gloves, leather leggings,

and high boots.

PROTECT others from splatter, flash,

and glare with protective screens or

barriers.

IN SOME AREAS, protection from noise

may be appropriate.

BE SURE protective equipment is in good

condition.

Also, wear safety glasses in work area

AT ALL TIMES.

SPECIAL SITUATIONS

DO NOT WELD OR CUT containers or materials which

previously had been in contact with hazardous

substances unless they are properly cleaned. This is

extremely dangerous.

DO NOT WELD OR CUT painted or plated parts unless

special precautions with ventilation have been taken.

They can release highly toxic fumes or gases.

Additional precautionary measures

PROTECT compressed gas cylinders from

excessive heat, mechanical shocks, and arcs;

fasten cylinders so they cannot fall.

BE SURE cylinders are never grounded or part

of an electrical circuit.

REMOVE all potential fire hazards from welding

area.

ALWAYS HAVE FIRE FIGHTING EQUIPMENT READY

FOR IMMEDIATE USE AND KNOW HOW TO USE IT.

Product specificaties

Merk:	Lincoln Electric
Categorie:	Niet gecategoriseerd
Model:	Cool Arc 47

Heb je hulp nodig?

Als je hulp nodig hebt met Lincoln Electric Cool Arc 47 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden

Uw naam*

Jouw email*

Schrijf hier uw vraag

Handleiding Niet gecategoriseerd Lincoln Electric

Lincoln Electric Circulator Handleiding

8 April 2024

Lincoln Electric Handy MIG Handleiding

8 April 2024

Lincoln Electric K5334-1 Handleiding

9 Januari 2024

Lincoln Electric Power Arc 5000 Handleiding

9 Januari 2024

Lincoln Electric Country 300 Handleiding

7 Juli 2023

Lincoln Electric AC-225-GLM Handleiding

7 Juli 2023

Lincoln Electric HydroGuard Rod Oven 350 Handleiding

6 Juli 2023

Lincoln Electric Helix T55 Weld Head Handleiding

6 Juli 2023

Lincoln Electric APEX 3 Series TIG Pendant Handleiding

6 Juli 2023

Lincoln Electric PRISM COMPACT Handleiding

6 Juli 2023

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd

Playtive IAN 327221 Handleiding

1 Mei 2024

Samsung UN32J4001AF Handleiding

1 Mei 2024

Bauknecht KSI 18GF2 P2 Handleiding

27 April 2024

Fakir Artemis TS 150 Handleiding

26 April 2024

Sony UTX-M03 Handleiding

26 April 2024

Sony URX-P03 Handleiding

26 April 2024

Sony WRU-806B Handleiding

26 April 2024

Sony UTX-B03 Handleiding

26 April 2024

Sony UTX-P03 Handleiding

26 April 2024

Sony ODS-L10 Handleiding

26 April 2024