Lightware DVIDL-OPT-RX100 Handleiding

Lightware AV extender DVIDL-OPT-RX100

Lees hieronder de 📖 handleiding in het Nederlandse voor Lightware DVIDL-OPT-RX100 (36 pagina's) in de categorie AV extender. Deze handleiding was nuttig voor 71 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/36

DVIDL-OPT-TX200

DVIDL-OPT-RX100

User’s Manual

Fiber Optical Multimedia Extender



DVIDL-OPT series – User's Manual 2

Important Safety Instructions

Class II apparatus construction.

The equipment should be operated only from the power source

indicated on the product.

To disconnect the equipment safely from power, remove the power

cord from the rear of the equipment, or from the power source. The

MAINS plug is used as the disconnect device, the disconnect device

shall remain readily operable.

There are no user-serviceable parts inside of the unit. Removal of the

cover will expose dangerous voltages. To avoid personal injury, do not

remove the cover. Do not operate the unit without the cover installed.

The appliance must be safely connected to multimedia systems.

Follow instructions described in this manual.

Ventilation

For the correct ventilation and to avoid overheating ensure enough

free space around the appliance. Do not cover the appliance, let the

ventilation holes free and never block or bypass the ventilators (if any).

WARNING

To prevent injury, the apparatus is recommended to securely attach to

the oor/wall or mount in accordance with the installation instructions.

The apparatus shall not be exposed to dripping or splashing and that

no objects lled with liquids, such as vases, shall be placed on the

apparatus. No naked ame sources, such as lighted candles, should

be placed on the apparatus.

Waste Electrical & Electronic Equipment

WEEE

This marking shown on the product or its literature,

indicates that it should not be disposed with other

household wastes at the end of its working life. To

prevent possible harm to the environment or human

health from uncontrolled waste disposal, please

separate this from other types of wastes and recycle it

responsibly to promote the sustainable reuse of material

resources. Household users should contact either the

retailer where they purchased this product, or their local government

ofce, for details of where and how they can take this item for

environmentally safe recycling. Business users should contact their

supplier and check the terms and conditions of the purchase contract.

This product should not be mixed with other commercial wastes for

disposal.

Caution: Laser product

INVISIBLE LASER RADIATION

AVOID DIRECT EYE EXPOSURE

CLASS 3R LASER PRODUCT

Radiated wavelenght:

778 nm, 800 nm, 825 nm, 850 nm

Output power <= 1 mW

Classified by EN 60825-1:2007

Common Safety Symbols

Symbol Description

Direct current

Alternating current

Double insulation

Caution, possibility of eletric shock

Caution

Laser radiation

Caution: for indoor use only









DVIDL-OPT series – User's Manual 3

Symbol Legend

The following symbols and markings are used in the document:

WARNING! Safety-related information which is highly

recommended to read and keep in every case!

ATTENTION! Useful information to perform a successful procedure;

it is recommended to read.

INFO: A notice which may contain additional information. Procedure

can be successful without reading it.

DEFINITION: The short description of a feature or a function.

TIPS AND TRICKS: Ideas which you may have not known yet but can

be useful.

Navigation Buttons

Go back to the previous page. If you clicked on a link previously,

you can go back to the source page by clicking the button.

Navigate to the Table of Contents.

Step back one page.

Step forward to the next page.









Document Information

All presented functions refer to the indicated products. The descriptions

have been made during testing these functions in accordance with the

indicated Hardware/Firmware/Software environment:

Item Version

Lightware Device Controller (LDC) software 1.24.0

Lightware Bootloader software 3.3.3

Controller rmware - DVIDL-OPT-TX200 1.2.3

Controller rmware - DVIDL-OPT-RX100 1.2.2

Hardware - DVIDL-OPT-TX200 1.1

Hardware - DVIDL-OPT-RX100 1.0

Document revision: 3.0

Release date: 30.08.2018

Editor: Laszlo Zsedenyi

About Printing

Lightware Visual Engineering supports green technologies and

Eco-friend mentality. Thus, this document is made for digital usage

primarily. If you need to print out few pages for any reason, follow the

recommended printing settings:

▪Page size: A4

▪Output size: Fit to page or Match page size

▪Orientation: Landscape

TIPS AND TRICKS: Thanks to the size of the original page, a border

around the content (gray on the second picture below) makes

possible to organize the pages better. After punching the printed

pages, they can be placed easily into a ring folder.

12 3







Product specificaties

Merk:	Lightware
Categorie:	AV extender
Model:	DVIDL-OPT-RX100
Kleur van het product:	Zwart
Gewicht:	701 g
Breedte:	110 mm
Diepte:	181 mm
Hoogte:	42.2 mm
Soort:	AV-receiver
LED-indicatoren:	Ja
USB-connectortype:	Mini-USB B
Connectiviteitstechnologie:	Bedraad
Maximum resolutie:	4096 x 1200 Pixels
Inclusief AC-adapter:	Ja
Aantal USB-aansluitingen:	1
Certificering:	CE
Aansluiting voor netstroomadapter:	Ja
3D:	Ja
Materiaal:	Metaal
Ondersteunde grafische resoluties:	2048 x 1080
Duurzaamheidscertificaten:	RoHS
Externe adapter:	Ja
Rack-montage:	Ja
Output current:	2.5 A
DVI output ports:	1
Bandbreedte:	1.65 Gbit/s
Maximaal bereik:	2500 m
AC-ingangsspanning:	100 - 240 V
AC-ingangsfrequentie:	50 - 60 Hz
Bedrijfstemperatuur (T-T):	0 - 50 °C
Relatieve vochtigheid in bedrijf (V-V):	10 - 90 procent
Vezel-optische connector:	LC
Draad modus structuur:	Multimode
Extended display identification data (EDID):	Ja
Ondersteunde golflengten:	778,800,825,850 nm
Stroomverbruik (RX):	4 W
Budget optisch verlies:	8 dB
Bedieningspaneel aan de voorzijde (RX):	Ja
OMA-ontvanger gevoeligheid:	-14.25 dBm