Liftmaster LC-36A Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Liftmaster LC-36A (12 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 24 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/12
LiftMaster
845 Larch Avenue
Elmhurst, IL 60126-1196
Model LC-36A
LiftMaster® Light Curtain
2
Light Curtain
Receiver
Light Curtain
Transmitter
12" (30.5 cm) minimum
above the photoelectric
sensors and away from
the door
Primary Monitored
Entrapment Protection Device
(Photoelectric Sensors)
Secondary entrapment protection ONLY
Primary entrapment protection
6" (15 cm) maximum
above the floor
and away from the door
Receiver
Transmitter
To prevent possible SERIOUS INJURY or DEATH from a closing door:
Be sure to DISCONNECT POWER to the operator BEFORE installing
the Light Curtain.
The door MUST be in the fully opened or closed position BEFORE
installing the Light Curtain.
Correctly connect and align the Light Curtain transmitter and receiver.
The Light Curtain is for use with LiftMaster
® Commercial Doors. Use
with ANY other product voids the warranty.
DO NOT use this product for the protection of dangerous machinery
or in explosive atmospheres or radioactive environments. Use ONLY
specifi c and approved types of devices for such applications.
The Light Curtain MUST be installed ONLY by authorized and fully
trained personnel.
LiftMaster Monitored Entrapment Protection devices are required in
addition to the Light Curtain. The Light Curtain may NOT be used as
the sole entrapment protection device for ANY entrapment zone.
IMPORTANT INFORMATION ABOUT THE LIGHT CURTAIN
LiftMaster® Light Curtain (Model LC-36A) is an ancillary entrapment protection device used with sectional and rolling doors that is designed with 8
optical sensors that form 22 total invisible light beams. These light beams create a cross-pattern or netting effect for maximum protection against
entrapment. When properly connected and aligned, the Light Curtain will detect an obstruction in the path of the light beams. If an obstruction breaks
any light beam while the door is closing, the operator will stop and reverse to the full open position. The invisible light beam must be unobstructed. No
part of the door (or door tracks, springs, hinges, rollers or other hardware) may interrupt the light beam while the door is closing.
The Light Curtain Transmitter must be installed facing the Light Curtain Receiver across the entrapment zone, 12" (30.5 cm) above the primary
monitored entrapment protection device. The minimum installation width is 3 feet (.91 m) and the maximum width is 33 feet (10 m).
INTRODUCTION
3
CARTON INVENTORY
SPECIFICATIONS
Optical
Operating range: ............................................3 - 33 feet (.91 - 10 meters)
Coverage area: ............................................. 36" (91.4 cm) detection zone
Number of optical sensors: ......................................................................8
Number of invisible light beams: ............................................................22
Receiver LED: ................................................................................... Green
Transmitter LED: ............................................................................. Amber
Electrical
Current Draw ................................................................................... 40 mA
Supply voltage: .....................................................18 to 30 volts AC or DC
Output Type: ......Solid-state Relay, Normally Open (N.O.) when energized
Mechanical
Housing material: ...................................................... Aluminum, anodized
Cable length: ...............................................................................6'6" (2m)
Enclosure rating: ...........................................................................NEMA 4
Operating temperature range: .............- 40°F to +140°F (- 40°C to +60°C)
Storage temperature range: ............... - 40°F to +185°F (- 40°C to +85°C)
Dimensions
Light Curtain Receiver
Mounting Brackets (4)
Light Curtain Transmitter
Red cable end
Green LED
Black cable end
Amber LED
Optical Sensors (8)
2' 9.5"
(86.1 cm)
.2" (5 mm)
.27" (7 mm)
LED
3' 8.25"
(112 cm)
1' 6.23"
(46.3 cm)
.47" (12 mm)
44" (111.8 cm) length with 36" (91.4 cm) detection zone
APPLICATION
The Light Curtain is compatible with LiftMaster Heavy, Standard, and
Medium Duty Logic, FDC, FDCL, FDOA, FDOB, and Egress Commercial
Door Operators. The Light Curtain is approved for track mounting. The
Light Curtain is for indoor use only but may be installed in areas exposed
to rain or moisture.
INTRODUCTION
The images in this document are for reference only and your product may look different.
ACCESSORIES
Conduit Kit ...............................................................................OES-COND
Conduit kit with 2 junction boxes and 2 fl exible cables.
Plug-In Power Supply ...............................................................100MAPS
For medium-duty LiftMaster commercial door operators with low current
capability. Also for use with Logic operators for additional power to
operate the Light Curtains.
Not Shown
Screws, Washers, and Nuts with Nylon Insert
Wire Connectors (6)
Blocking Material
Installation Manual


Product specificaties

Merk: Liftmaster
Categorie: Niet gecategoriseerd
Model: LC-36A

Heb je hulp nodig?

Als je hulp nodig hebt met Liftmaster LC-36A stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Niet gecategoriseerd Liftmaster

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd