Liftmaster HDSW24UL Handleiding

Liftmaster Niet gecategoriseerd HDSW24UL

Lees hieronder de 📖 handleiding in het Nederlandse voor Liftmaster HDSW24UL (64 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 22 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/64

COMMERCIAL DC

VEHICULAR SWING GATE OPERATOR

INSTALLATION MANUAL

LiftMaster

300 Windsor Drive

Oak Brook, IL 60523

• THIS PRODUCT MUST BE INSTALLED AND

SERVICED IN ACCORDANCE WITH THIS

MANUAL BY A TRAINED GATE SYSTEMS

TECHNICIAN ONLY.

• This model is for use on vehicular passage

gates ONLY and not intended for use on

pedestrian passage gates.

• This model is intended for use in Class I, II,

III and IV vehicular swing gate applications.

• Visit LiftMaster.com to locate a professional

installing dealer in your area.

• This gate operator is compatible with myQ®

and Security+ 2.0® accessories.

Access installation and technical support

guides or register this product

Send it in by texting

the photo to 71403.

Take a photo of the

camera icon including

the points ( ).

HDSW24ULTECH

Model HDSW24UL

SAFETY 2

Safety Symbol and Signal Word Review ................................................2

Usage Class ...........................................................................................3

UL325 Entrapment Protection Requirements ........................................3

Safety Installation Information ...............................................................4

Role of Dealers, Installers, and Trained Gate System Technicians ........5

Role of End Users/Home Owners ..........................................................5

Gate Construction Information ...............................................................6

INTRODUCTION 7

Carton Inventory ....................................................................................7

Operator Specifications ..........................................................................8

Site Preparation .....................................................................................9

Check Your Gate ....................................................................................9

INSTALLATION 10

Types of Installations ...........................................................................10

Step 1 Determine Location for Concrete Pad and Operator .................11

Step 2 Concrete Pad and Operator Attachment ...................................13

Step 3 Position the Gate Bracket .........................................................14

Step 4 Adjust the Operator Arm Length ...............................................14

Step 5 Secure the Operator Arm ..........................................................15

Step 6 Install Entrapment Protection ...................................................16

Step 7 Earth Ground Rod .....................................................................18

Step 8 Power Wiring ............................................................................18

Step 9 Connect Batteries .....................................................................20

Step 10 Dual Gate Setup ......................................................................22

Step 11 Install the Cover .....................................................................24

ADJUSTMENT 25

Limit, Speed, and Force Adjustment ....................................................25

Obstruction Test ..................................................................................27

PROGRAMMING 28

Remote Controls (not provided) ..........................................................28

LiftMaster Internet Gateway (not provided) .........................................29

CAPXL Connected Access Portal .........................................................29

Erase All Codes ....................................................................................30

Erase Limits .........................................................................................30

Constant Pressure Override (CPO) ......................................................30

Gate Hold Open Feature .......................................................................30

To Remove and Erase Monitored Entrapment Protection Devices .......30

OPERATION 31

Gate Operator Setup Examples ............................................................31

Control Board Overview .......................................................................32

Manual Disconnect ..............................................................................33

Reset Switch ........................................................................................33

Relay Board and Terminal Block Access ..............................................33

Operator Alarm ....................................................................................34

Remote Control ....................................................................................34

ACCESSORY WIRING 35

External Control Devices ......................................................................35

Locks ...................................................................................................36

Miscellaneous Wiring ...........................................................................36

EXPANSION AND RELAY BOARDS 37

Expansion and Relay Boards Overview ................................................37

Auxiliary Relays ...................................................................................38

Wiring Accessories to the Expansion Board ........................................39

MAINTENANCE 40

Important Safety Instructions ..............................................................40

Maintenance Chart ...............................................................................41

Batteries ...............................................................................................41

TROUBLESHOOTING 42

Diagnostic Codes .................................................................................42

Control Board LEDs .............................................................................43

Troubleshooting Chart .........................................................................44

SOLAR PANELS 47

Step 8 Solar Panel(s) ...........................................................................47

REPAIR PARTS 51

ACCESSORIES 52

WARRANTY 54

APPENDIX 55

SAMS Wiring with Relays Not Energized .............................................55

Dual Gate Settings ...............................................................................56

Limit Setup with a Remote Control ......................................................57

Wiring Diagram ....................................................................................58

Diagnostic Codes Table .......................................................................59

Site Planning Safety Checklist .............................................................61

CONTACT INFORMATION 64

WARNING: This product can expose you to chemicals including lead, which are known to the State of California to cause cancer or birth defects

or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

When you see these Safety Symbols and Signal Words on the following pages, they will alert

you to the possibility of if you do not comply with the warnings that Serious Injury or Death

accompany them. The hazard may come from something mechanical or from electric shock.

Read the warnings carefully.

When you see this Signal Word on the following pages, it will alert you to the possibility of

damage to your gate and/or the gate operator if you do not comply with the cautionary

statements that accompany it. Read them carefully.

IMPORTANT NOTE:

• BEFORE attempting to install, operate or maintain the operator, you must read and fully

understand this manual and follow all safety instructions.

• DO NOT attempt repair or service of your gate operator unless you are a Trained Gate

Systems Technician.

MECHANICAL

ELECTRICAL

TABLE OF CONTENTS

SAFETY

Safety Symbol and Signal Word Review

Usage Class

Class I - Residential Vehicular Gate Operator

A vehicular gate operator (or system) intended for use in garages or parking areas

associated with a residence of one-to four single families.

Class II - Commercial/General Access Vehicular Gate

A vehicular gate operator (or system) intended for use in a commercial location or

building such as a multi-family housing unit (five or more single family units), hotel,

garages, retail store, or other buildings accessible by or servicing the general public.

Class III - Industrial/Limited Access Vehicular Gate

A vehicular gate operator (or system) intended for use in an industrial location or

building such as a factory or loading dock area or other locations not accessible by or

intended to service the general public.

Class IV - Restricted Access Vehicular Gate Operator

A vehicular gate operator (or system) intended for use in a guarded industrial location

or building such as an airport security area or other restricted access locations not

servicing the general public, in which unauthorized access is prevented via supervision

by security personnel.

UL325 Entrapment Protection Requirements

Definitions

ENTRAPMENT: The condition when a person is caught or held in a

position that increases the risk of injury.

SWING GATE ENTRAPMENT ZONE: Locations between a moving gate or

moving, exposed operator components and a counter opposing edge or

surface where entrapment is possible up to 1.8 m (6 ft.) above grade.

Such locations occur if during any point in travel:

a. The gap between the bottom of a moving gate and the ground is

greater than 101.6 mm (4") and less than 406 mm (16"); or

b. The distance between the center line of the pivot and the end of the

wall, pillar, or column to which it is mounted when in the open or

closed position exceeds 101.6 mm (4"). Any other gap between a

moving gate and fixed counter opposing edges or surfaces or other

fixed objects is less than 406 mm (16") (examples are walls, curbs,

berms or other immovable objects).

INDEPENDENT MONITORED ENTRAPMENT PROTECTION DEVICE: An

entrapment protection device is independent if it is a different type

(photoelectric sensors, edge device, inherent protection device) from the

other devices in the same entrapment zone.

Use the Site Planning Safety Checklist in the appendix to identify

entrapment zones found in your installation.

Requirements

•Aminimum of two independent monitored entrapment protection

devices are required to be installed at each entrapment zone.

• It is the responsibility of the installer to install external monitored

entrapment protection devices for each entrapment zone.

•The operator will only operate with a minimum of two independent

monitored entrapment protection devices installed in either the open

or closed direction. If no entrapment zone exists in the other

direction, an external entrapment protection device is NOT required in

that direction.

This operator has an inherent entrapment protection device built-in.

The installer MUST provide one additional entrapment protection

device for each entrapment zone.

Acceptable entrapment protection device types include:

• Inherent (built into the operator)

• LiftMaster monitored external photoelectric sensors, see page 52 for

acceptable sensors.

• LiftMaster monitored external edge sensors, see page 52 for

acceptable sensors.

IMPORTANT SAFETY

INSTRUCTIONS

To reduce the risk of INJURY or DEATH:

• READ AND FOLLOW ALL INSTRUCTIONS.

• NEVER let children operate or play with gate controls. Keep the

remote control away from children.

• ALWAYS keep people and objects away from the gate. NO ONE

SHOULD CROSS THE PATH OF THE MOVING GATE.

• Test the gate operator monthly. The gate MUST reverse on

contact with an object or reverse when an object activates the

noncontact sensors. After adjusting the speed, force, or the limit

of travel, retest the gate operator. Failure to adjust and retest the

gate operator properly can increase the risk of INJURY or DEATH.

• Use the manual release ONLY when the gate is not moving.

• KEEP GATES PROPERLY MAINTAINED. Read this manual. Have a

Trained Gate Systems Technician make repairs to gate hardware.

• The entrance is for vehicles ONLY. Pedestrians MUST use separate

entrance.

•SAVE THESE INSTRUCTIONS.

Product specificaties

Merk:	Liftmaster
Categorie:	Niet gecategoriseerd
Model:	HDSW24UL

Heb je hulp nodig?

Als je hulp nodig hebt met Liftmaster HDSW24UL stel dan hieronder een vraag en andere gebruikers zullen je antwoorden

Uw naam*

Jouw email*

Schrijf hier uw vraag

Handleiding Niet gecategoriseerd Liftmaster

Liftmaster CAPXSHOOD Handleiding

8 December 2023

Liftmaster 041DJ003MC Handleiding

17 Augustus 2023

Liftmaster myQ-SGC2WCH Handleiding

9 Juli 2023

Liftmaster CAPXS Handleiding

9 Juli 2023

Liftmaster 041D8006-1 Handleiding

9 Juli 2023

Liftmaster IHSL24UL Handleiding

9 Juli 2023

Liftmaster LJ8900W Handleiding

9 Juli 2023

Liftmaster MGJ5011U Handleiding

8 Juli 2023

Liftmaster 041A7767 Handleiding

8 Juli 2023

Liftmaster 41K4629 Handleiding

8 Juli 2023

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd

Playtive IAN 327221 Handleiding

1 Mei 2024

Samsung UN32J4001AF Handleiding

1 Mei 2024

Bauknecht KSI 18GF2 P2 Handleiding

27 April 2024

Fakir Artemis TS 150 Handleiding

26 April 2024

Sony UTX-M03 Handleiding

26 April 2024

Sony URX-P03 Handleiding

26 April 2024

Sony WRU-806B Handleiding

26 April 2024

Sony UTX-B03 Handleiding

26 April 2024

Sony UTX-P03 Handleiding

26 April 2024

Sony ODS-L10 Handleiding

26 April 2024