Liftmaster 1000SDR Handleiding
Liftmaster
Garagedeuropeners
1000SDR
Lees hieronder de 📖 handleiding in het Nederlandse voor Liftmaster 1000SDR (36 pagina's) in de categorie Garagedeuropeners. Deze handleiding was nuttig voor 34 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld
Pagina 1/36
TM
The Chamberlain Group, Inc.
A DUCHOSSOIS ENTERPRISE
845 Larch Avenue
Elmhurst, Illinois 60126-1196
For Residential Use Only
Garage Door Opener
Model 2000SDR
1/2 HP
Model 1000SDR
1/3 HP
Complies with UL 325
regulations effective
January 1, 1993
®
Please read this manual and the enclosed safety materials carefully!
Fasten the manual near the garage door after installation.
The door WILL NOT CLOSE unless the Protector System®is connected and properly
aligned.
Periodic checks of the opener are required to ensure safe operation.
The model number label is located on the back of your opener.
Start by reviewing these important safety alert symbols:
Safety alert symbol review............................................2
Safety information and precautions ..............................3
Testing your garage door for binding & balance ..........3
Hardware supplied ........................................................3
Carton inventory ...........................................................4
Illustration of sectional door installation .....................5
Illustration of one-piece door installation .....................5
Assembly section - pages 6 – 7
Fasten rail to power unit..............................................6
Install the trolley .........................................................6
Attach the rail brackets ...............................................7
Installation safety instructions ....................................7
Installation section - pages 8 – 23
Determine the header bracket location
Sectional door ...........................................................8
One-piece door..........................................................9
Install the header bracket ..........................................10
Attach the rail to the header bracket .........................11
The Protector System®.............................................12
Install the safety reversing sensor .............................13
Position the opener....................................................15
Hang the opener ........................................................16
Install the door control and connect all wires ...........17
Electrical requirements .............................................18
Complete the safety reversing sensor installation.....18
Install the lights and lens ..........................................19
Attach the manual release rope and handle...............19
Fasten the door bracket (sectional door)...................20
Fasten the door bracket (one-piece door)..................21
Connect door arm to trolley (sectional door)............22
Connect door arm to trolley (one-piece door)...........23
Adjustment section - pages 24 – 26
Travel limit adjustments............................................24
Force adjustments .....................................................25
Test the Protector System®........................................26
Test the safety reverse system ..................................26
Operation safety instructions ......................................27
Care of your opener ....................................................27
Maintenance schedule.................................................27
Operation of your opener ............................................28
Receiver & remote control programming ...................29
Having a problem?......................................................30
Repair parts, rail assembly..........................................32
Repair parts, installation .............................................32
Repair parts, power unit..............................................33
Accessories .................................................................34
Index ...........................................................................35
How to order repair parts ............................................36
Warranty......................................................................36
When you see these Safety Symbols on the following pages, they will alert you to the possibility of
serious injury
or death if you do not comply with the corresponding instructions. The hazard may come from something
mechanical or from electric shock. Read the instructions carefully.
When you see this Safety Symbol on the following pages, it will alert you to the possibility of damage to your
garage door and/or the garage door opener if you do not comply with the corresponding instructions. Read the
instructions carefully.
This garage door opener is designed and tested to offer safe service provided it is installed, operated, maintained
and tested in strict accordance with the safety instructions contained in this manual.
Mechanical
Electrical
WARNING
WARNING
CAUTION
Contents
3
An unbalanced garage door might not reverse when
required and someone under the door could be seriously
injured or killed.
If your garage door binds, sticks or is out of balance, call
for professional garage door service.
Garage doors, door
springs, cables, pulleys, brackets, and their hardware are
under extreme tension and can cause serious injury or
death.
Do not try to loosen, move or adjust them
yourself!
Ropes left on a garage door could cause someone to
become entangled and killed.
Remove all ropes
connected to the door before installing and operating the
opener.
To avoid damage to the garage door and opener, disable
locks before installing and operating the opener. Use a
wood screw or nail to hold locks in the "open" (unlocked)
position.
Operation at other than 120V 60 Hz will cause opener
malfunction and damage.
Identify the type and height of your door, any special
conditions that exist, and any additional materials that
may be required.
Test Your Door for Balance
Before you begin, complete the following test to make
sure your door is balanced, and is not sticking or
binding:
• Lift the door about halfway as shown. Release the door.
It should stay in place, supported entirely by its springs.
• Raise and lower the door to see if there is any binding
or sticking.
WARN
WARN
WARN
WARNWARNING
ING
ING
INGING CAUTION
CAUTION
CAUTION
CAUTION
CAUTIONCAUTION
SECTIONAL DOOR
ONE-PIECE DOOR
Sectional
Door
One-Piece
Door
Safety Information and Precautions
Safety Reversing Sensor
Installation
Carriage Bolts 1/4" - 20 x 1/2" (2)
Wing Nut (2)
Insulated Staples (20)
Rail Assembly
Coupling Sleeve (1)
Hex Screw 1/4"-20 x 5/8" (4)
Nut 1/4" - 20 (4)
Opener Installation
Hex Screw 5/16"-18 x 7/8" (4)
Lag Screw 5/16"-9 x 1-5/8" (2)
Lag Screw 5/16"-18 x 1-7/8" (2)
Carriage Bolt 5/16"-18 x 2-1/2" (2)
Clevis Pin 5/16" x 2-3/4" (1)
Clevis Pin 5/16" x 1-1/4" (1)
Clevis Pin 5/16" x 1" (1)
Nut 5/16" - 18 (6)
Lock Washer 5/16" (6)
Screw 6AB x 1-1/4" (2)
Screw 6-32 x 1" (2)
Insulated Staples (10)
Ring Fastener (3)
Handle
Dry Wall Anchors (2)
Rope
Hardware Supplied
Product specificaties
| Merk: | Liftmaster |
| Categorie: | Garagedeuropeners |
| Model: | 1000SDR |
Heb je hulp nodig?
Als je hulp nodig hebt met Liftmaster 1000SDR stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Garagedeuropeners Liftmaster
4 Oktober 2022
4 Oktober 2022
4 Oktober 2022
Handleiding Garagedeuropeners
Nieuwste handleidingen voor Garagedeuropeners
4 Oktober 2022