LG LFL1300 Handleiding

Bekijk gratis de handleiding van LG LFL1300 (2 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 12 mensen en kreeg gemiddeld 5.0 sterren uit 8 reviews. Heb je een vraag over LG LFL1300 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

Installation Guide

Dome Bracket Adaptor

Model: LFL1300

Introduction

This product is designed for installation of LG Dome

camera into the Wall Mount assembly (LBK1000W),

Pendant Mount assembly (LBK1000P) or Parapet Mount

assembly (LBK1000R) on the ceiling or wall.

The installable LG Dome Camera

-

LND3’s, LCV5’s, LCD5’s, LNV5’s, LND5’s, LND7’s, LNV7’s

and L9322 models

-

Refer to the owner’s manual of LG Dome Camera for

the compatibility of this product.

-

Actual set may be dier from the picture described

in this manual.

Installation Precautions

y

Make sure that the installation place can endure at

least 4 times of the total weight of the Dome Bracket

Adaptor, Camera, and Wall/Ceiling/Parapet Mount

Adaptor.

y

The Dome Bracket Adaptor can be also connected

to 1.5” NPT screw-thread pipe as well as to the Wall/

Ceiling/Parapet Mount assembly.

Specifications

y

Dimensions (Ø x H): 141 mm x 50 mm

y

Net Weight: 0.18 kg

y

Material: Aluminum

y

Operating Temperature: -50 °C to 60 °C

y

Operating Humidity: 0 to 100 %

WARNING:

This product contains chemicals known to the State

of California to cause cancer and birth defects or

reproductive harm.Wash hands after handling.

Getting Started

Installation with L9322

model

Note:

This Bracket Adaptor supports only L9322 model produced later than August 2012.

a

b

c

d

Dome Bracket

Adaptor

(LFL1300)

Insert the Dome Bracket Adaptor to 1.5” NPT screw-

thread (female) pipe or to the Wall/Ceiling/Parapet

Mount Adaptor (LBK1000W/LBK1000P/LBK1000R)

and tighten the three pipe screws.

Make sure you x the three pipe screws. If not

secured tightly, the Dome Bracket Adaptor

may loosen from the Pipe or Adaptor, causing

physical damage or malfunction.

(Make sure you check the connection between

two components before proceeding with the

next step.)

>

Warning

Assemble the housing of the Dome Camera to the

Dome Bracket Adaptor and tighten four screws.

Turn the Dome Cover clockwise to secure it to the

camera.

Assemble the camera and the housing and tighten

four screws. (Align the “FRONT” marks of the camera

mounting bracket and the camera assembly for

proper camera orientation.)

Accessories

-

Installation manual

-

Screw accessory

y

Screw Machine(M4 x L10.0 mm) (4 ea)

Product specificaties