LG 29FS7RNX Handleiding

LG Televisie 29FS7RNX

Lees hieronder de 📖 handleiding in het Nederlandse voor LG 29FS7RNX (20 pagina's) in de categorie Televisie. Deze handleiding was nuttig voor 46 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/20
Colour Television
OWNER’S MANUAL
Please read this manual carefully before operating your set.
Retain it for future reference.
Record model number and serial number of the set.
See the label attached on the back cover and quote this infor-
mation to your dealer when you require service.
Model number :
Serial number :
BZ03
Contents
Installation ........................................................2
Connection of external equipment.................3
Location and function of controls .................4
Basic operation...............................................8
On screen menus ...........................................8
Setting up TV stations ................................... 9
Picture adjustment ........................................ 12
Audio adjustment ..........................................13
Time setting ...................................................15
Option functions ...........................................15
Teletext (option) ............................................17
Troubleshooting check list ..........................19
2
Installation
Power
This set operates on an AC mains supply, the volt-
age is as indicated on the label on the back cover.
Never apply DC power to the set. In the event of
thunderstorms or powercuts, please pull out the
aerial and mains plugs.
DISCONNECTING DEVICE FROM MAINS
Mains plug is the disconnecting device. The plug
must remain readily operable
Warning
To prevent fire or shock hazard, do not expose the
set to rain or moisture.
Do not place anything containing liquid on top of
the set, this may cause a fire or could give an
electric shock.
Service
Never remove the back cover of the set as this
can expose you to very high voltage and other
hazards. If the set does not operate properly,
unplug it and call your dealer.
Aerial
Connect the aerial cable to the socket on the back
cover. For the best reception an outdoor aerial
should be used.
Location
Position your set so that no bright light or sunlight
falls directly onto the screen. Care should be
taken not to expose the set to any unnecessary
vibration, moisture, dust or heat. Also ensure that
the set is placed in a position to allow a free flow
of air. Do not cover the ventilation openings on the
back cover.
3
Connection of external equipment
You can connect additional equipment, such as
VCRs, camcorders etc. to your set.
What is shown here may be somewhat different
from your set.
Aerial socket
1. Connect the RF out socket of the VCR to the
aerial socket on the back of the set.
2. Connect the aerial cable to the RF aerial in
socket of the VCR.
3. Store the VCR channel on the programme
number 0 using the ‘Manual programme tun-
ing’ section.
4. Select the programme number where the VCR
channel is stored.
5. Press the PLAY button on the VCR.
Audio/Video in/out sockets (option)
1. Connect the audio/video out sockets of the
VCR to audio/video in sockets of the set.
2. If the VCR is connected to the AV sockets on
the set, press the TV/AV button to select
AV
(or AV1)
,AV 2,
or
AV3.
3. Press the PLAY button on the VCR.
The VCR playback picture appears on the
screen.
You can also record programmes received by
the TV on video tape via audio/video out sock-
ets.
Note :
If you have a mono VCR, connect the audio
cable from the VCR to the AUDIO L/MONO sock
et of the set.
Euro scart socket(option)
1. Connect the Euro scart socket of the VCR to
the Euro scart socket of the set.
2. Press the PLAY button on the VCR.
If your VCR outputs a switching voltage when
connected to Euro scart socket, the set will
switch to
AV AV1(or )
mode automatically. But
if you want to keep on watching TV mode,
press the TV/AV button to select TV.
Otherwise press the TV/AV button on the
remote control handset to select
AV (or
AV1)
.The VCR playback picture appears on
the screen.
You can also record programmes received by
theTV on video tape.
Note : Signal type RGB, i.e. the signals red, green
and blue can only be selected for the Euro scart
socket. These signals are transmitted, for exam-
ple, by a pay TV decoder, game machine or photo
CD unit, etc.
Component in sockets (option)
1. Connect the COMPONENT video output sockets
(Y Cb Cr, YPb Pr or Y B-Y R-Y) of the COMPO-
NENT (480i/480p/576i/576p/720p/1080i/1080p) to
the COMPONENT INPUT sockets (Y PB RP )
on the set.
2. Connect the audio cable from the COMPONENT
(480i/480p/576i/576p/720p/1080i/1080p) to
AUDIO IN sockets of COMPONENT.
3. Press the TV/AV button to select COMPO-
NENT.
4. Press the PLAY button on the COMPONENT.
The COMPONENT playback picture appears
on the screen.
HDMI (option)
1. Connect the HDMI output of the DVD or the
digital set-top box to the HDMI jack on the
set.
2. Press the TV/AV button to select HDMI .
3. Turn on the DVD or the digital set-top box.
(Refer to the owner’s manual for the DVD or
the digital set-top box.)
Note :
a. TV can receive the video and audio signal
simultaneously with using a HDMI cable.
b. If the digital set-top box supports Auto HDMI
function,the output resolution of the soource
device will be automatically set to 1920x1080i.
c. If the digital set-top box player does not sup-
ports Auto HDMI function ,you need to set set
the out put resolution appropriately.
To get the best picture quality,adjust the output
resolution of the soource device to 1920x1080i.
d. The HDMI cable is not supplied with the set.


Product specificaties

Merk: LG
Categorie: Televisie
Model: 29FS7RNX

Heb je hulp nodig?

Als je hulp nodig hebt met LG 29FS7RNX stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Televisie LG

Handleiding Televisie

Nieuwste handleidingen voor Televisie