LG 21FG1AG Handleiding

LG Televisie 21FG1AG

Lees hieronder de 📖 handleiding in het Nederlandse voor LG 21FG1AG (18 pagina's) in de categorie Televisie. Deze handleiding was nuttig voor 14 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/18
Colour Television
OWNER’S MANUAL
Please read this manual carefully before operating your set.
Retain it for future reference.
Record model number and serial number of the set.
See the label attached on the back cover and quote this infor-
mation to your dealer when you require service.
Model number :
Serial number :
Contents
Installation.........................................................2
Connection of external equipment..................3
Location and function of controls...................4
Basic operation.................................................8
On screen menus..............................................8
Setting up TV stations......................................9
Picture adjustment..........................................12
Sound adjustment...........................................13
Time setting.....................................................14
Other functions...............................................15
Troubleshooting check list............................17
2
Power
This set operates on an AC mains supply, the
voltage is as indicated on the label on the back
cover. Never apply DC power to the set. In the
event of thunderstorms or powercuts, please pull
out the aerial and mains plugs.
Warning
To prevent fire or shock hazard, do not expose
the set to rain or moisture.
Do not place anything containing liquid on top of
the set, this may cause a fire or could give an
electric shock.
Service
Never remove the back cover of the set as this
can expose you to very high voltage and other
hazards. If the set does not operate properly,
unplug it and call your dealer.
Aerial
Connect the aerial cable to the socket marked
+75 Ωon the back cover. For the best reception
an outdoor aerial should be used.
Location
Position your set so that no bright light or sunlight
falls directly onto the screen. Care should be
taken not to expose the set to any unnecessary
vibration, moisture, dust or heat. Also ensure that
the set is placed in a position to allow a free flow
of air. Do not cover the ventilation openings on
the back cover.
Installation
3
You can connect additional equipment, such as
VCRs, camcorders etc. to your set.
Here shown may be somewhat different from your
set.
Aerial socket
1. Connect the RF out socket of the VCR to the
aerial socket on the back of the set.
2. Connect the aerial cable to the RF aerial in
socket of the VCR.
3. Store the VCR channel on the programme
number 0 using the ‘Manual programme tun-
ing’ section.
4. Select the programme number where the VCR
channel is stored.
5. Press the PLAY button on the VCR.
Audio/Video in/out sockets (option)
1. Connect the audio/video out sockets of the
VCR to audio/video in sockets of the set and
in sockets of the VCR to out sockets of the set.
2. If the VCR is connected to the AV sockets on
the set, press the TV/AV button to select
AV
(or AV1)
, AV 2.
3. Press the PLAY button on the VCR.
The VCR playback picture appears on the
screen.
You can also record programmes received by
the TV on video tape via audio/video out sock-
ets.
Note : If you have a mono VCR, connect the audio
cable from the VCR to the AUDIO L/MONO sock-
et of the set.
Euro scart socket (option)
1. Connect the Euro scart socket of the VCR to
the Euro scart socket of the set.
2. Press the PLAY button on the VCR.
If your VCR outputs a switching voltage when
connected to Euro scart socket, the set will
switch to
AV AV1(or )
mode automatically. But
if you want to keep on watching TV mode,
press the D
D
D
D
D
/ E
E
E
E
E
or NUMBER buttons.
Otherwise press the TV/AV button on the
remote control handset to select
AV AV1(or )
.
The VCR playback picture appears on the
screen.
You can also record programmes received by
the TV on video tape.
Note : Signal type RGB, i.e. the signals red, green
and blue can only be selected for the Euro scart
socket. These signals are transmitted, for exam-
ple, by a pay TV decoder, game machine or photo
CD unit, etc.
S-video / Audio in sockets (S-AV)
(option)
When connecting the S-video socket of the VCR
to the S-VIDEO socket of the set, the picture qual-
ity will be further improved.
1. Connect the S-video socket of the VCR to the
S-VIDEO socket of the set.
2. Connect the audio cable from the VCR to the
AUDIO sockets of the set.
3. Select AV3 by pressing the TV/AV button
repeatedly.
4. Press the PLAY button on the VCR.
The VCR playback picture appears on the
screen.
Note : If both S-VIDEO and VIDEO sockets have
been connected to the VCR simultaneously, only
the S-VIDEO can be received.
Component in sockets (option)
1. Connect the COMPONENT video output sock-
ets (Y Cb Cr, Y Pb Pr or Y B-Y R-Y) of the DVD
player to the COMPONENT INPUT sockets (Y
P PB R) on the set.
2. Connect the audio cable from the DVD player
to AUDIO IN sockets of
AV AV1(or )
.
3. Press the TV/AV button to select COMPO-
NENT.
4. Press the PLAY button on the DVD player.
The COMPONENT playback picture appears
on the screen.
Headphone socket (option)
Only models which have a headphone socket can
perform this function.
Insert the headphone plug to the headphone sock-
et of the set.
You can listen to the sound through the head-
phones. To adjust the headphone volume, press
the F/ G button.
If you press the button, the sound from theMUTE
headphone’s is switched off.
Connection of external equipment


Product specificaties

Merk: LG
Categorie: Televisie
Model: 21FG1AG

Heb je hulp nodig?

Als je hulp nodig hebt met LG 21FG1AG stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Televisie LG

Handleiding Televisie

Nieuwste handleidingen voor Televisie