Lewitt LCT 340 Handleiding
Bekijk gratis de handleiding van Lewitt LCT 340 (1 pagina’s), behorend tot de categorie Telefoon. Deze gids werd als nuttig beoordeeld door 38 mensen en kreeg gemiddeld 4.6 sterren uit 19.5 reviews. Heb je een vraag over Lewitt LCT 340 of wil je andere gebruikers van dit product iets vragen? Stel een vraag
Pagina 1/1
// LCT 340
QUICKSTART GUIDE
BRUTALLY HONEST
BEAUTIFULLY CLEAR
PROFESSIONAL MULTIPURPOSE
PENCIL MICROPHONE
// Getting started
1 Connect your microphone to your mixing console, audio interface or microphone
preamplifi er using a 3-pin XLR cable.
2 Supply the LCT 340 with 48V phantom power.
3 Choose your settings.
4 You are ready to go!
// Overview
// Externally polarized small diaphragm (0.8“ / 20 mm) condenser microphone
// Cardioid polar pattern for effective isolation of the main sound source
// Interchangeable capsules for cardioid and omnidirectional pattern
// Flat frequency response
// High dynamic range and very low self-noise
// 4 low-cut settings: linear, 40 Hz (12 dB/oct), 150 Hz (6 dB/oct), 300 Hz (6 dB/oct)
// 4 pre-attenuation settings: 0 dB, -6 dB, -12dB and -18 dB
// Illuminated user interface for easy handling even in dark environments
// Gold plated & corrosion-resistant 3-pin XLR output connector
Top applications // Acoustic instruments, drums and percussion, wind instruments
// User interface
1 Illuminated attenuation display // The currently active attenuation setting is illuminated.
2 Recessed attenuation slide switch // Choose between 0 dB, -6 dB, -12 dB and -18 dB by adjusting the slide switch. Attenuation
is used in high SPL environments in order to prevent clipping of the microphone, mixer and other audio equipment.
3 Illuminated low-cut fi lter display // The currently active low-cut setting is illuminated.
4 Recessed low-cut fi lter slide switch // Choose between linear, 40 Hz (12 dB/oct), 150 Hz (6 dB/oct) and 300 Hz (6 dB/oct)
by adjusting the slide switch. Low-cut fi lters eliminate unwanted low frequency noise such as structure borne noise, wind and
handling noise. Do not forget to use the supplied windshield if suitable.
5 Recessed LED on/off push button // By briefl y pressing the recessed push button the LED illumination can be turned on or off.
// Please Note
// The capsule is a sensitive, high precision component. Make sure you do not drop it from high heights and avoid strong mechanical
stress and force.
// To ensure high sensitivity and best sound reproduction of the microphone, avoid exposing it to moisture, dust or extreme
temperatures. Use supplied windshield if suitable.
// Do not apply excessive force on the switches or the connected cable.
// When disconnecting the microphone cable, grasp the connector and do not pull the cable.
// Do not attempt to modify or fi x the microphone, as it would void your product warranty.
// The casing of the microphone can be cleaned easily using a wet cloth,
never use alcohol or another solvent for cleaning.
// The windshield can be washed with soap water, if necessary.
READ THE
FULL MANUAL!
LEARN EVERYTHING ABOUT YOUR LCT 340
www.lewitt-audio.com/resources/manuals/LCT-340.pdf
LEWITT
®
Burggasse 79
1070 Vienna
Austria
www.lewitt-audio.com
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received,
including interference that may cause undesired operation.
1
2
3
4
5
Product specificaties
| Merk: | Lewitt |
| Categorie: | Telefoon |
| Model: | LCT 340 |
Heb je hulp nodig?
Als je hulp nodig hebt met Lewitt LCT 340 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Telefoon Lewitt
6 September 2024
15 Augustus 2024
14 Augustus 2024
14 Augustus 2024
14 Augustus 2024
14 Augustus 2024
14 Augustus 2024
Handleiding Telefoon
- Microsoft
- Panasonic
- Amplicom
- Oricom
- Logik
- Essentiel B
- Olympia
- Amplicomms
- Airis
- ZyXEL
- Thomson
- Cisco
- Jacob Jensen
- Sedna
- ZTE
Nieuwste handleidingen voor Telefoon
15 September 2025
11 September 2025
8 September 2025
6 September 2025
6 September 2025
6 September 2025
3 September 2025
3 September 2025
31 Augustus 2025
31 Augustus 2025