Lenoxx SL8x2 Handleiding

Bekijk gratis de handleiding van Lenoxx SL8x2 (1 pagina’s), behorend tot de categorie Verlichting. Deze gids werd als nuttig beoordeeld door 47 mensen en kreeg gemiddeld 4.8 sterren uit 9 reviews. Heb je een vraag over Lenoxx SL8x2 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

SOLAR MOTION SENSOR LIGHT

Model no: SL8

The light is powered by solar ener through the solar gy

panel. The solar panel converts sun-ght into enerligy that is stored inside the

rechargeable baeries duri the day. ttng

The light should be installed in a location where receives at least 8 hours of direct it

sunshine, and the surface of the solar panel should face the direction that receives the

maximum amount of sunlight. Shady locaons wi reduce the battery charge, and till

therefore, the working me. ti

Specifications:

Light source: 1pc High Lumin LED

Sensor Distance: 10M

Sensor Angle: about 145°~180°

1.Diagram a introctionnddu

2.Installation

Please read the instructions carefully, and then install the solar motion sensor

light accordingly.

Installation & Opation:er

Swch the button to position on the back of the solar sensor.itON

Use the provided 2 screws to fix the solar sensor against the wa. Put the screws ll

into the wall at a distance of 3.5 centimeters away om each other. fr

The light ll turn when people walk through the sensor area, the moon sensor witi

w acilltilivate and the ght will turn on.

The light stay on after the moon sensor is activated then turn off willti

automatically.

3.Precautions

(1)Do not touch the surfa of the solar panel. ce

(2)The surfa of the solar panel must be kept clean. If it is dusty, the ce

sensor won’t be charged efficiently.

(3)You n chk if the lights are working by covering the upper surface caec

of the solar panel completely in order to activate the light sensor.

(4)The light is designed to work when it gets dark. If there is high level

of light nearby, such as a strtlight, the light may appr very dim or eeea

not turn on at all.

(5)Although the batteries were charged by the manufturer, the charge ac

level has probably dropped by the time you receive them. Please

charge them for a full day in order to ensure maximum performance.

4.Replacing the batty er

If the light stops working after being used for a lon

g time, the batteries may

have exded their lifespan. Use a screwdriver to remove the screws at the cee

back of the product, and then install new rechargeable batteries. When

resealing, ensure that all screws are sured tightly. (Battery specification: ec

3.2V AA 500MAH Li-battery). The battery is included.

5.Batty Warnings er

1.This product should only be replaced th rechargeable 3.2V AA 500 MAH wi

Li- batteries.

2. The baery cannot be thrown away into normal waste. It must be recycled in a tt

suitable recycle bin locally.

3.

Insert batteries into the battery compament according to the polarity markings rt

(+/-). Injury or explosion could occur if placed incorrectly.

4. T mix alkaline, standard (carbon-zinc) or rechargeable (nickel-cadium) DONO

batteries together

MADEN CHINA I

Product specificaties